#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
74bb55bc |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: xilinx: Remove <common.h> and add needed includes Remove <common.h> from all mach-versal-net, mach-versal, mach-zynq and mach-zynqmp files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
174d7284 |
|
10-Jul-2023 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Switch to amd.com emails Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
b4501aa0 |
|
19-May-2023 |
Algapally Santosh Sagar <santoshsagar.algapally@amd.com> |
mach-zynqmp: handoff: Add missing header Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
254f0c76 |
|
06-Jun-2022 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Add debug messages to bl2_plat_get_bl31_params() It is useful to get information about BL type and entry address that's why add some debug messages. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/fb023b618a009009a0b564c24223cadc10ced5b3.1652871741.git.michal.simek@amd.com
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@amd.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@amd.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@amd.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
653736c2 |
|
31-May-2021 |
Michal Simek <michal.simek@xilinx.com> |
zynqmp: Pass bl32 entry to TF-A via xilinx handoff structure There is need to pass entry about secure OS when bl32_entry is defined. Currently only 64bit support is added but /fit-images node have been extended to also record if this is 32bit or 64bit secure OS. When this is tested the code will be update to support this configuration too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
96a60c03 |
|
03-Sep-2020 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Change bl2_plat_get_bl31_params() guarding It was protected just for SPL_OS_BOOT but this function is only called when SPL_ATF is enabled that's why change macro name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
3b26c860 |
|
19-Dec-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm: zynqmp: Wire SPL/ATF handoff structure properly handoff_setup() was used to generate fixed handoff structure for ATF on ZynqMP platform. Switching to bl2_plat_get_bl31_params() platform brings more flexibility because information can be taken from fit image where /fit-images node is created at run time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
#
274ccb5b |
|
17-Jan-2019 |
Michal Simek <michal.simek@xilinx.com> |
arm64: zynqmp: Move SoC sources to mach-zynqmp Similar changes was done for Zynq in past and this patch just follow this pattern to separate cpu code from SoC code. Move arch/arm/cpu/armv8/zynqmp/* -> arch/arm/mach-zynqmp/* And also fix references to these files. Based on "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|