#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
ba0b54ba |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: omap2: Remove <common.h> and add needed includes Remove <common.h> from all mach-omap2 files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
901ff692 |
|
05-Mar-2022 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Make clock functions static get_osc_clk_speed and get_sys_clkin_sel are only used in one file. Make them static. Tested on OMAP3530, DM3730, AM3517. Signed-off-by: Adam Ford <aford173@gmail.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bd8a9c14 |
|
11-Jun-2018 |
Adam Ford <aford173@gmail.com> |
arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO When CMD_GPIO is enabled the command 'gpio status -a' can cause a hang or reboot if GPIO banks are not enabled, because it scans all banks. This patch enables all GPIO banks so 'gpio status -a' can fully execute. Signed-off-by: Adam Ford <aford173@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
94d50bed |
|
07-Aug-2017 |
Adam Ford <aford173@gmail.com> |
Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XX The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
983e3700 |
|
07-Nov-2016 |
Tom Rini <trini@konsulko.com> |
arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
ba0b54ba |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: omap2: Remove <common.h> and add needed includes Remove <common.h> from all mach-omap2 files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
901ff692 |
|
05-Mar-2022 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Make clock functions static get_osc_clk_speed and get_sys_clkin_sel are only used in one file. Make them static. Tested on OMAP3530, DM3730, AM3517. Signed-off-by: Adam Ford <aford173@gmail.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bd8a9c14 |
|
11-Jun-2018 |
Adam Ford <aford173@gmail.com> |
arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO When CMD_GPIO is enabled the command 'gpio status -a' can cause a hang or reboot if GPIO banks are not enabled, because it scans all banks. This patch enables all GPIO banks so 'gpio status -a' can fully execute. Signed-off-by: Adam Ford <aford173@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
94d50bed |
|
07-Aug-2017 |
Adam Ford <aford173@gmail.com> |
Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XX The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
983e3700 |
|
07-Nov-2016 |
Tom Rini <trini@konsulko.com> |
arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
901ff692 |
|
05-Mar-2022 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Make clock functions static get_osc_clk_speed and get_sys_clkin_sel are only used in one file. Make them static. Tested on OMAP3530, DM3730, AM3517. Signed-off-by: Adam Ford <aford173@gmail.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org> |
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
bd8a9c14 |
|
11-Jun-2018 |
Adam Ford <aford173@gmail.com> |
arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO When CMD_GPIO is enabled the command 'gpio status -a' can cause a hang or reboot if GPIO banks are not enabled, because it scans all banks. This patch enables all GPIO banks so 'gpio status -a' can fully execute. Signed-off-by: Adam Ford <aford173@gmail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
94d50bed |
|
07-Aug-2017 |
Adam Ford <aford173@gmail.com> |
Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XX The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> |
#
983e3700 |
|
07-Nov-2016 |
Tom Rini <trini@konsulko.com> |
arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
a1702746 |
|
14-Dec-2018 |
Adam Ford <aford173@gmail.com> |
ARM: mach-omap2: omap3: Fix GPIO clocking in SPL OMAP3_GPIO_x is needed to enable each GPIO bank on the OMAP3 boards. At one point, the #ifdef's were replaced with if CONFIG_IS_ENABLED but this won't work for people who need OMAP3_GPIO_x in SPL since the SPL prefix for this option isn't used in Kconfig. This patch moves the check to #if defined and also makes Kconfig select the banks if CMD_GPIO is used which makes the checks in the code less cumbersome. Fixes: bd8a9c14c91c ("arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO") Reported-by: Liam O'Shaughnessy <liam.o.shaughnessy@gumstix.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Migrate omap3_igep00x0.h] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
bd8a9c14 |
|
11-Jun-2018 |
Adam Ford <aford173@gmail.com> |
arm: mach-omap2/omap3/clock.c: Enable all GPIO with CMD_GPIO When CMD_GPIO is enabled the command 'gpio status -a' can cause a hang or reboot if GPIO banks are not enabled, because it scans all banks. This patch enables all GPIO banks so 'gpio status -a' can fully execute. Signed-off-by: Adam Ford <aford173@gmail.com>
|
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
94d50bed |
|
07-Aug-2017 |
Adam Ford <aford173@gmail.com> |
Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XX The driver is for all boards 24XX and up, so let's eliminate the extra option called CONFIG_SYS_I2C_OMAP34XX since the driver checks for CONFIG_OMAP34XX we don't need CONFIG_SYS_I2C_OMAP34XX. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
983e3700 |
|
07-Nov-2016 |
Tom Rini <trini@konsulko.com> |
arm: Introduce arch/arm/mach-omap2 for OMAP2 derivative platforms This moves what was in arch/arm/cpu/armv7/omap-common in to arch/arm/mach-omap2 and moves arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2 as subdirectories. All refernces to the former locations are updated to the current locations. For the logic to decide what our outputs are, consolidate the tests into a single config.mk rather than including 4. Signed-off-by: Tom Rini <trini@konsulko.com>
|