#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
67557588 |
|
19-Apr-2024 |
Wadim Egorov <w.egorov@phytec.de> |
phycore-am64x: Migrate to OF_UPSTREAM The phycore-am64x can be migrated to OF_UPSTREAM. Drop redundant device tree files, update MAINTAINERS and defconfig's DEFAULT_DEVICE_TREE for ti vendor prefix accordingly. While at it, drop the redundant definitions of AM642_PHYBOARD_ELECTRA_DTB & SPL_AM642_PHYBOARD_ELECTRA_DTB from the binman dtsi file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
46b3ff82 |
|
28-Feb-2024 |
Wadim Egorov <w.egorov@phytec.de> |
board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM Add support for PHYTEC phyCORE-AM64x SoM. Supported features: - 2GB DDR4 RAM - eMMC Flash - external uSD - OSPI NOR Flash - debug UART Product page SoM: https://www.phytec.com/product/phycore-am64x Device trees were taken from Linux v6.8-rc2. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|
#
ed51c911 |
|
01-Nov-2023 |
Andrew Davis <afd@ti.com> |
arm: mach-k3: am64x: Move board selection to mach-k3 Currently each set of board targets from a vendor is selected inside the board directory for that vendor. This has the problem of multiple targets, one from each vendor, being selectable at the same time. For instance you can select both TARGET_AM654_A53_EVM and TARGET_IOT2050_A53 in the same build. To fix this we need to move the target board choice to a common location for each parent SoC selection. Do this in arch/arm/mach-k3. Signed-off-by: Andrew Davis <afd@ti.com>
|