#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
6553581a |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig Move the CONFIG_AT91FAMILY option from include/mach/<soc>.h header file to Kconfig. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> |
#
2dc63f73 |
|
22-Mar-2017 |
Wenyou Yang <wenyou.yang@atmel.com> |
gpio: at91_gpio: remove CPU_HAS_PIO3 macro The intention of the removal is the preparation to introduce the new AT91 PIO pinctrl driver. Use the union to make the PIO3 and PIO2's registers be together and make their offset aligned. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
e4677f1a |
|
05-Nov-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: atmel_sfr: move saic redirect to separate file To make saic redirect code sharing with other SoCs, move the saic redirect code from SAMA5D4 particular file, mach-at91/armv7/sama5d4_devices.c to a separate file, mach-at91/atmel_sfr.c Move ATMEL_SFR_AICREDIR_KEY definition to sama5d4.h, because each SoC has its own value. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
b5665bf2 |
|
05-Nov-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: matrix: use matrix slave id macros To make matrix initialization code sharing with others, use the matrix slave id macros, instead of hard-coding. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
ce39680f |
|
08-Sep-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: Change the Chip ID registers' addresses Provide the specific addresses for the Chip ID and Chip ID Extension registers, instead of the offset, which make it use on other chips. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
a2df3a37 |
|
04-Feb-2015 |
Bo Shen <voice.shen@atmel.com> |
ARM: atmel: armv7: switch to use common timer functions The commit 8dfafdd (Introduce common timer functions), add common timer functions, we can use them directly. Signed-off-by: Bo Shen <voice.shen@atmel.com> [rebase on current master] Sigend-off-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
af930827 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
ARM: at91: move SoC headers to mach-at91/include/mach Move arch/arm/include/asm/arch-at91/* -> arch/arm/mach-at91/include/mach/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
6553581a |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig Move the CONFIG_AT91FAMILY option from include/mach/<soc>.h header file to Kconfig. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> |
#
2dc63f73 |
|
22-Mar-2017 |
Wenyou Yang <wenyou.yang@atmel.com> |
gpio: at91_gpio: remove CPU_HAS_PIO3 macro The intention of the removal is the preparation to introduce the new AT91 PIO pinctrl driver. Use the union to make the PIO3 and PIO2's registers be together and make their offset aligned. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
e4677f1a |
|
05-Nov-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: atmel_sfr: move saic redirect to separate file To make saic redirect code sharing with other SoCs, move the saic redirect code from SAMA5D4 particular file, mach-at91/armv7/sama5d4_devices.c to a separate file, mach-at91/atmel_sfr.c Move ATMEL_SFR_AICREDIR_KEY definition to sama5d4.h, because each SoC has its own value. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
b5665bf2 |
|
05-Nov-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: matrix: use matrix slave id macros To make matrix initialization code sharing with others, use the matrix slave id macros, instead of hard-coding. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
ce39680f |
|
08-Sep-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: Change the Chip ID registers' addresses Provide the specific addresses for the Chip ID and Chip ID Extension registers, instead of the offset, which make it use on other chips. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
a2df3a37 |
|
04-Feb-2015 |
Bo Shen <voice.shen@atmel.com> |
ARM: atmel: armv7: switch to use common timer functions The commit 8dfafdd (Introduce common timer functions), add common timer functions, we can use them directly. Signed-off-by: Bo Shen <voice.shen@atmel.com> [rebase on current master] Sigend-off-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
af930827 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
ARM: at91: move SoC headers to mach-at91/include/mach Move arch/arm/include/asm/arch-at91/* -> arch/arm/mach-at91/include/mach/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
6553581a |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: Move CONFIG_AT91FAMILY option to Kconfig Move the CONFIG_AT91FAMILY option from include/mach/<soc>.h header file to Kconfig. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
|
#
2dc63f73 |
|
22-Mar-2017 |
Wenyou Yang <wenyou.yang@atmel.com> |
gpio: at91_gpio: remove CPU_HAS_PIO3 macro The intention of the removal is the preparation to introduce the new AT91 PIO pinctrl driver. Use the union to make the PIO3 and PIO2's registers be together and make their offset aligned. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
e4677f1a |
|
05-Nov-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: atmel_sfr: move saic redirect to separate file To make saic redirect code sharing with other SoCs, move the saic redirect code from SAMA5D4 particular file, mach-at91/armv7/sama5d4_devices.c to a separate file, mach-at91/atmel_sfr.c Move ATMEL_SFR_AICREDIR_KEY definition to sama5d4.h, because each SoC has its own value. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
#
b5665bf2 |
|
05-Nov-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91/spl: matrix: use matrix slave id macros To make matrix initialization code sharing with others, use the matrix slave id macros, instead of hard-coding. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
#
ce39680f |
|
08-Sep-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: Change the Chip ID registers' addresses Provide the specific addresses for the Chip ID and Chip ID Extension registers, instead of the offset, which make it use on other chips. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
#
a2df3a37 |
|
04-Feb-2015 |
Bo Shen <voice.shen@atmel.com> |
ARM: atmel: armv7: switch to use common timer functions The commit 8dfafdd (Introduce common timer functions), add common timer functions, we can use them directly. Signed-off-by: Bo Shen <voice.shen@atmel.com> [rebase on current master] Sigend-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
#
af930827 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
ARM: at91: move SoC headers to mach-at91/include/mach Move arch/arm/include/asm/arch-at91/* -> arch/arm/mach-at91/include/mach/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
|