#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
dd8c4a19 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: at91: Remove <common.h> and add needed includes Remove <common.h> from all mach-at91 files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <masahiroy@kernel.org> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co> |
#
dd8c4a19 |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
arm: at91: Remove <common.h> and add needed includes Remove <common.h> from all mach-at91 files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <masahiroy@kernel.org> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co> |
#
65cc0e2a |
|
16-Nov-2022 |
Tom Rini <trini@konsulko.com> |
global: Move remaining CONFIG_SYS_* to CFG_SYS_* The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co> |
#
401d1c4f |
|
30-Oct-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co> |
#
c05ed00a |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop linux/delay.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org> |
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> |
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
2b21cf55 |
|
13-Sep-2017 |
Wenyou Yang <wenyou.yang@microchip.com> |
ARM: at91: spl: Add mck function to lower rate while switching Refer to the commit 70f8c8316ad(PMC: add new mck function to lower rate while switching) from AT91Bootstrap. While switching to a lower clock source, we must switch the clock source first instead of last. Otherwise, we could end up with too high frequency on internal bus and peripherals. This happens on SAMA5D2 as exitting from the ROM code. Add a function pmc_mck_init_down() to allow this sequence. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
1221ce45 |
|
20-Sep-2016 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: replace #include <asm/errno.h> with <linux/errno.h> Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
7a91e1a3 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: complete the GCK's clock sources Add the UPLL clock and master clock as a clock source for getting the generated clock frequency to complete its clock sources support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
|
#
4adf6a71 |
|
11-Apr-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: fix the GCK's clock source Before enabling a generated clock whose source is from the UPLL clock, check and enable the UPLL clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
|
#
41bf25c2 |
|
02-Feb-2016 |
Wenyou Yang <wenyou.yang@atmel.com> |
ARM: at91: clock: add a new file to handle clock To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
#
c1900055 |
|
29-Oct-2015 |
Wenyou Yang <wenyou.yang@atmel.com> |
arm: at91: clock: Add the generated clock support Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
|
#
62011840 |
|
20-Feb-2015 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
ARM: at91: collect SoC sources into mach-at91 This commit moves source files as follows: arch/arm/cpu/arm920t/at91/* -> arch/arm/mach-at91/arm920t/* arch/arm/cpu/arm926ejs/at91/* -> arch/arm/mach-at91/arm926ejs/* arch/arm/cpu/armv7/at91/* -> arch/arm/mach-at91/armv7/* arch/arm/cpu/at91-common/* -> arch/arm/mach-at91/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.co>
|