#
6e7df1d1 |
|
10-Jan-2023 |
Tom Rini <trini@konsulko.com> |
global: Finish CONFIG -> CFG migration At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7805cdf4 |
|
23-Jun-2017 |
Kever Yang <kever.yang@rock-chips.com> |
rockchip: use common sdram function Replace the sdram_init() in board init and rockchip_sdram_size() in sdram driver for all the Rockchip SoCs which enable CONFIG_RAM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Make dram_init() in rk3036-board.c conditional on CONFIG_RAM: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
#
bd7e6086 |
|
18-Feb-2017 |
Heiko Stübner <heiko@sntech.de> |
rockchip: rk3288: sdram: use constants in ddrconf table Use defines to describe the bit shifts used to create the table for ddrconf register values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org> |
#
5ff093ab |
|
30-Aug-2015 |
Simon Glass <sjg@chromium.org> |
rockchip: rk3288: Add SDRAM init Add code to set up the SDRAM in SPL, ready for loading U-Boot. This uses device tree for configuration so should be able to support other RAM configurations. It may be possible to generalise the code to support other SoCs at some point. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
7805cdf4 |
|
23-Jun-2017 |
Kever Yang <kever.yang@rock-chips.com> |
rockchip: use common sdram function Replace the sdram_init() in board init and rockchip_sdram_size() in sdram driver for all the Rockchip SoCs which enable CONFIG_RAM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Make dram_init() in rk3036-board.c conditional on CONFIG_RAM: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> |
#
bd7e6086 |
|
18-Feb-2017 |
Heiko Stübner <heiko@sntech.de> |
rockchip: rk3288: sdram: use constants in ddrconf table Use defines to describe the bit shifts used to create the table for ddrconf register values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org> |
#
5ff093ab |
|
30-Aug-2015 |
Simon Glass <sjg@chromium.org> |
rockchip: rk3288: Add SDRAM init Add code to set up the SDRAM in SPL, ready for loading U-Boot. This uses device tree for configuration so should be able to support other RAM configurations. It may be possible to generalise the code to support other SoCs at some point. Signed-off-by: Simon Glass <sjg@chromium.org> |
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
7805cdf4 |
|
23-Jun-2017 |
Kever Yang <kever.yang@rock-chips.com> |
rockchip: use common sdram function Replace the sdram_init() in board init and rockchip_sdram_size() in sdram driver for all the Rockchip SoCs which enable CONFIG_RAM. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Make dram_init() in rk3036-board.c conditional on CONFIG_RAM: Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
|
#
bd7e6086 |
|
18-Feb-2017 |
Heiko Stübner <heiko@sntech.de> |
rockchip: rk3288: sdram: use constants in ddrconf table Use defines to describe the bit shifts used to create the table for ddrconf register values. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Glass <sjg@chromium.org>
|
#
5ff093ab |
|
30-Aug-2015 |
Simon Glass <sjg@chromium.org> |
rockchip: rk3288: Add SDRAM init Add code to set up the SDRAM in SPL, ready for loading U-Boot. This uses device tree for configuration so should be able to support other RAM configurations. It may be possible to generalise the code to support other SoCs at some point. Signed-off-by: Simon Glass <sjg@chromium.org>
|