ar71xx: update bomb

ar71xx: split tp-link image building code into a separate file
ar71xx: split legacy image building code into a separate file
ar71xx: split ubnt image building code into a separate file
ar71xx: move generic device image definitions to a separate file
ar71xx: move nand device image definitions to a separate file
ar71xx: Add support for initramfs images for OpenMesh devices
ar71xx: Generate sysupgrade images for OpenMesh devices
ar71xx: Move OpenMesh image target validation into subfunction
ar71xx: Allow OpenMesh CE images with more than 3 files
ar71xx: add kernel support for the OpenMesh OM2P-HSv3
ar71xx: add user-space support for the OpenMesh OM2P-HSv3
ar71xx: enable sysupgrade for the OpenMesh OM2P-HSv3
package/om-watchdog: add OpenMesh OM2P-HSv3 support
package/uboot-envtools: add OpenMesh OM2P-HSv3 support
ar71xx: add OM2P-HSv3 to the OM2P profile
ar71xx: add kernel support for the OpenMesh MR1750v2
ar71xx: add user-space support for the OpenMesh MR1750v2
ar71xx: enable sysupgrade for the OpenMesh MR1750v2
package/om-watchdog: add OpenMesh MR1750v2 support
package/uboot-envtools: add OpenMesh MR1750v2 support
ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750v2 board
ar71xx: add MR1750v2 to the MR1750 profile
ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510
ar71xx/cpe510: use second wifi calibration table
ar71xx: add GPIO pin for usb power switch for RouterBOARD 912
ar71xx: switch ordering and template to improve readability
ar71xx: Fix TL-WR841N v11 LEDs, use separate machine

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

uboot-envtools: add OpenMesh OM5P-ACv2 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49153 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-envtools: add OpenMesh OM5P-AC support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49146 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-envtools: add support for ap120c

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49083 3c298f89-4303-0410-b956-a3cf2f4a3e73

ar71xx: PowerCloud CR5000 openwrt configuration

OpenWrt configuration part of support for the PowerCloud Systems
CR5000. The CR5000 is a dual-band 802.11n wireless router with
8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and
five port gigabit ethernet switch. The CR5000 was sold as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47946 3c298f89-4303-0410-b956-a3cf2f4a3e73

ar71xx: PowerCloud CR3000 OpenWrt configuration

OpenWRt configuration part of support for the PowerCloud
Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with
8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast
ethernet wan port that was sold by PowerCloud Systems as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47945 3c298f89-4303-0410-b956-a3cf2f4a3e73

ar71xx: PowerCloud CAP324 OpenWrt configuration

Openwrt configuration part of support for PowerCloud CAP324
Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems
who's stock firmware (CloudCommand) provides 'cloud' based managment
of large numbers access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port. It can be powered via PoE
or a wall wart.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47944 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh MR1750 support

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46931 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh OM5P-AN support

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44865 3c298f89-4303-0410-b956-a3cf2f4a3e73

package: uboot-envtools: add nbg6716 to appropriate group

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44308 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-envtools: add carambola2 support

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43317 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh MR900v2 support

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43269 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh MR900 support

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43263 3c298f89-4303-0410-b956-a3cf2f4a3e73

ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.

Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup. OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry. If such a region
is found, bootloader will try to increment imageNtrynum and boot it.

This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).

root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
00000000 9e f3 63 91 61 63 74 69 76 65 72 65 67 69 6f 6e |..c.activeregion|
00000010 3d 31 00 69 6d 61 67 65 31 73 74 61 74 75 73 3d |=1.image1status=|
00000020 30 00 69 6d 61 67 65 32 73 74 61 74 75 73 3d 30 |0.image2status=0|
00000030 00 69 6d 61 67 65 32 74 72 79 6e 75 6d 3d 30 00 |.image2trynum=0.|
00000040 69 6d 61 67 65 6d 61 78 74 72 79 3d 33 00 69 6d |imagemaxtry=3.im|
00000050 61 67 65 31 74 72 79 6e 75 6d 3d 30 00 00 00 00 |age1trynum=0....|
00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42914 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh OM5P support

Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41774 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add support for the EnGenius EAP300 v2 board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41660 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add support for the Tube2H board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41651 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh OM2P-HSv2 support

Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40965 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh OM2Pv2 support

Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40959 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-envtools: add support for the ZyXEL NBG6716 board

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40501 3c298f89-4303-0410-b956-a3cf2f4a3e73

[package] uboot-envtools: add support for wndr3700

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39380 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-envtools: add support for hornet-ub-x2

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37789 3c298f89-4303-0410-b956-a3cf2f4a3e73

[package] uboot-env: add config for the ALFA NETWORKS Hornet-UB (AP121U)

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37382 3c298f89-4303-0410-b956-a3cf2f4a3e73

[package] uboot-env: wzr-600dhp uses wzr-hp-ag300h name

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35866 3c298f89-4303-0410-b956-a3cf2f4a3e73

ar71xx: add support for Buffalo WZR 600DHP

Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35840 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh MR600v2 support

Signed-off-by: Marek Lindner <marek@open-mesh.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35432 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add OpenMesh MR600 support

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34236 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/uboot-envtools: add CAP4200AG support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33959 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-envtools: OM2P-HS partition information

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33802 3c298f89-4303-0410-b956-a3cf2f4a3e73

[boot] move boot related packages to their own folder

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33781 3c298f89-4303-0410-b956-a3cf2f4a3e73