#
1.38 |
|
21-Mar-2024 |
nicm |
Revert detach-client part of last, did not intend this to go in.
|
#
1.37 |
|
21-Mar-2024 |
nicm |
Do not consider a selection present if it is empty, from Michael Grant (GitHub issue 3869). Also a typo fix from GitHub issue 3877.
|
Revision tags: OPENBSD_7_0_BASE OPENBSD_7_1_BASE OPENBSD_7_2_BASE OPENBSD_7_3_BASE OPENBSD_7_4_BASE OPENBSD_7_5_BASE
|
#
1.36 |
|
21-Aug-2021 |
nicm |
Add args parsing callback for some future work, currently unused.
|
Revision tags: OPENBSD_6_7_BASE OPENBSD_6_8_BASE OPENBSD_6_9_BASE
|
#
1.35 |
|
13-Apr-2020 |
nicm |
Make client -c and -t handling common in cmd-queue.c and try to be clearer about whether the client is the target client (must have a session) or not.
|
#
1.34 |
|
13-Apr-2020 |
nicm |
Also move cmdq_item and cmdq_list into cmd-queue.c (this is to make its use more clearly defined and preparation for some future work).
|
#
1.33 |
|
13-Apr-2020 |
nicm |
Make struct cmd local to cmd.c and move it out of tmux.h.
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE OPENBSD_6_4_BASE OPENBSD_6_5_BASE OPENBSD_6_6_BASE
|
#
1.32 |
|
22-Apr-2017 |
nicm |
Get rid of the extra layer of flags and cmd_prepare() and just store the CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
|
#
1.31 |
|
19-Apr-2017 |
nicm |
Add a suspend helper function, and do not allow detaching or suspending while already doing so.
|
Revision tags: OPENBSD_6_1_BASE
|
#
1.30 |
|
13-Jan-2017 |
nicm |
Add -E to detach-client to exec a command to replace the client instead of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
|
#
1.29 |
|
16-Oct-2016 |
nicm |
Mass rename struct cmd_q to struct cmdq_item and related.
|
#
1.28 |
|
10-Oct-2016 |
nicm |
Add static in cmd-* and fix a few other nits.
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE
|
#
1.27 |
|
19-Jan-2016 |
nicm |
I no longer use my SourceForge address so replace it.
|
#
1.26 |
|
14-Dec-2015 |
nicm |
Instead of combined flags for -c, -s, -t, split into different sets using an enum and simplify the parsing code.
|
#
1.25 |
|
13-Dec-2015 |
nicm |
Use member names in cmd_entry definitions so I stop getting confused about the order.
|
#
1.24 |
|
13-Dec-2015 |
nicm |
Instead of every command resolving the target (-t or -s) itself, prepare the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting.
This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements.
The old cmd_find_* functions remain for the moment but that layer will be dropped later.
Joint work with Thomas Adam.
|
#
1.23 |
|
08-Dec-2015 |
nicm |
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a couple of not very useful client hooks. This will eventually let commands be run at various points and on notifications. Joint work with Thomas Adam.
|
#
1.22 |
|
24-Nov-2015 |
nicm |
Fix usage of detach-client.
|
#
1.21 |
|
27-Oct-2015 |
nicm |
Break the common process set up, event loop and imsg dispatch code between server and client out into a separate internal API. This will make it easier to add another process.
|
Revision tags: OPENBSD_5_8_BASE
|
#
1.20 |
|
24-Apr-2015 |
nicm |
Convert clients list into a TAILQ.
|
Revision tags: OPENBSD_5_7_BASE
|
#
1.19 |
|
30-Jan-2015 |
nicm |
Tidy up detach-client a bit.
|
#
1.18 |
|
20-Oct-2014 |
nicm |
Move suspend-client code into detach-client.
|
#
1.17 |
|
20-Oct-2014 |
nicm |
Instead of setting up the default keys by building the key struct directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q.
As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
|
Revision tags: OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.16 |
|
15-Oct-2013 |
nicm |
Fix detach -a by skipping clients where the session is NULL.
|
#
1.15 |
|
10-Oct-2013 |
nicm |
Show session name in detached message. Requested by somebody a few months ago who didn't bother testing it. But it works for me anyway.
|
#
1.14 |
|
10-Oct-2013 |
nicm |
Remove the barely-used and unnecessary command check() function.
|
Revision tags: OPENBSD_5_4_BASE
|
#
1.13 |
|
24-Mar-2013 |
nicm |
Add a command queue to standardize and simplify commands that call other commands and allow a command to block execution of subsequent commands. This allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time from it. A command may suspend execution from the queue by returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited (unless attaching). A callback is also fired - this is used for nested commands in, for example, if-shell which can block execution of the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old curclient/cmdclient distinction - a cmdq is bound to one client (or none if in the configuration file), this is a command client if c->session is NULL otherwise an attached client.
|
#
1.12 |
|
24-Mar-2013 |
nicm |
Fix error reporting for client commands by adding a flag to cmd_find_client to tell it whether or not to show errors, sometimes it's needed and sometimes not.
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.11 |
|
11-Jul-2012 |
nicm |
Make command exec functions return an enum rather than -1/0/1 values and add a new value to mean "leave client running but don't attach" to fix problems with using some commands in a command sequence. Most of the work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
|
#
1.10 |
|
18-Jun-2012 |
nicm |
Add -a flag for detach-client, from Thomas Adam.
|
Revision tags: OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.9 |
|
11-Apr-2011 |
nicm |
-s comes before -t and also add -s to command syntax. Prompted by jmc.
|
#
1.8 |
|
11-Apr-2011 |
nicm |
Add -s option to detach all clients attached to a session, from Zac Sprackett.
|
#
1.7 |
|
03-Mar-2011 |
nicm |
Add a -P option to detach to HUP the client's parent process (usually causing it to exit as well).
|
Revision tags: OPENBSD_4_9_BASE
|
#
1.6 |
|
04-Jan-2011 |
nicm |
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a struct with the command data which was then serialised and sent to the server to be executed. The parsing was later moved into the server (an argv was sent from the client), but the parse step and intermediate struct was kept.
This change removes that struct and the separate parse step. Argument parsing and printing is now common to all commands (in arguments.c) with each command left with just an optional check function (to validate the arguments at parse time), the exec function and a function to set up any key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although as this touches every command please watch for any unexpected changes.
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE
|
#
1.5 |
|
06-Feb-2010 |
nicm |
Support attaching a client read-only with a new -r flag to the attach-session command.
|
#
1.4 |
|
13-Nov-2009 |
nicm |
Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the command entry structs and a couple of functions to check/set the flags.
|
#
1.3 |
|
26-Jul-2009 |
nicm |
Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less sensitive to other changes in the code, particularly with commands. The client now packs argv into a buffer and sends it to the server for parsing, rather than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling code.
Mixing a server without this change and a client with or vice versa will cause tmux to hang or crash, please ensure that tmux is entirely killed before upgrading.
|
#
1.2 |
|
13-Jul-2009 |
nicm |
Having fixed flags for single-character getopt options is a bit hard to maintain and is only going to get worse as more are used. So instead, add a new uint64_t member to cmd_entry which is a bitmask of upper and lowercase options accepted by the command.
This means new single character options can be used without the need to add it explicitly to the list.
|
Revision tags: OPENBSD_4_6_BASE
|
#
1.1 |
|
01-Jun-2009 |
nicm |
Import tmux, a terminal multiplexor allowing (among other things) a single terminal to be switched between several different windows and programs displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
|
#
1.36 |
|
21-Aug-2021 |
nicm |
Add args parsing callback for some future work, currently unused.
|
Revision tags: OPENBSD_6_7_BASE OPENBSD_6_8_BASE OPENBSD_6_9_BASE
|
#
1.35 |
|
13-Apr-2020 |
nicm |
Make client -c and -t handling common in cmd-queue.c and try to be clearer about whether the client is the target client (must have a session) or not.
|
#
1.34 |
|
13-Apr-2020 |
nicm |
Also move cmdq_item and cmdq_list into cmd-queue.c (this is to make its use more clearly defined and preparation for some future work).
|
#
1.33 |
|
13-Apr-2020 |
nicm |
Make struct cmd local to cmd.c and move it out of tmux.h.
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE OPENBSD_6_4_BASE OPENBSD_6_5_BASE OPENBSD_6_6_BASE
|
#
1.32 |
|
22-Apr-2017 |
nicm |
Get rid of the extra layer of flags and cmd_prepare() and just store the CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
|
#
1.31 |
|
19-Apr-2017 |
nicm |
Add a suspend helper function, and do not allow detaching or suspending while already doing so.
|
Revision tags: OPENBSD_6_1_BASE
|
#
1.30 |
|
13-Jan-2017 |
nicm |
Add -E to detach-client to exec a command to replace the client instead of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
|
#
1.29 |
|
16-Oct-2016 |
nicm |
Mass rename struct cmd_q to struct cmdq_item and related.
|
#
1.28 |
|
10-Oct-2016 |
nicm |
Add static in cmd-* and fix a few other nits.
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE
|
#
1.27 |
|
19-Jan-2016 |
nicm |
I no longer use my SourceForge address so replace it.
|
#
1.26 |
|
14-Dec-2015 |
nicm |
Instead of combined flags for -c, -s, -t, split into different sets using an enum and simplify the parsing code.
|
#
1.25 |
|
13-Dec-2015 |
nicm |
Use member names in cmd_entry definitions so I stop getting confused about the order.
|
#
1.24 |
|
13-Dec-2015 |
nicm |
Instead of every command resolving the target (-t or -s) itself, prepare the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting.
This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements.
The old cmd_find_* functions remain for the moment but that layer will be dropped later.
Joint work with Thomas Adam.
|
#
1.23 |
|
08-Dec-2015 |
nicm |
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a couple of not very useful client hooks. This will eventually let commands be run at various points and on notifications. Joint work with Thomas Adam.
|
#
1.22 |
|
24-Nov-2015 |
nicm |
Fix usage of detach-client.
|
#
1.21 |
|
27-Oct-2015 |
nicm |
Break the common process set up, event loop and imsg dispatch code between server and client out into a separate internal API. This will make it easier to add another process.
|
Revision tags: OPENBSD_5_8_BASE
|
#
1.20 |
|
24-Apr-2015 |
nicm |
Convert clients list into a TAILQ.
|
Revision tags: OPENBSD_5_7_BASE
|
#
1.19 |
|
30-Jan-2015 |
nicm |
Tidy up detach-client a bit.
|
#
1.18 |
|
20-Oct-2014 |
nicm |
Move suspend-client code into detach-client.
|
#
1.17 |
|
20-Oct-2014 |
nicm |
Instead of setting up the default keys by building the key struct directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q.
As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
|
Revision tags: OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.16 |
|
15-Oct-2013 |
nicm |
Fix detach -a by skipping clients where the session is NULL.
|
#
1.15 |
|
10-Oct-2013 |
nicm |
Show session name in detached message. Requested by somebody a few months ago who didn't bother testing it. But it works for me anyway.
|
#
1.14 |
|
10-Oct-2013 |
nicm |
Remove the barely-used and unnecessary command check() function.
|
Revision tags: OPENBSD_5_4_BASE
|
#
1.13 |
|
24-Mar-2013 |
nicm |
Add a command queue to standardize and simplify commands that call other commands and allow a command to block execution of subsequent commands. This allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time from it. A command may suspend execution from the queue by returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited (unless attaching). A callback is also fired - this is used for nested commands in, for example, if-shell which can block execution of the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old curclient/cmdclient distinction - a cmdq is bound to one client (or none if in the configuration file), this is a command client if c->session is NULL otherwise an attached client.
|
#
1.12 |
|
24-Mar-2013 |
nicm |
Fix error reporting for client commands by adding a flag to cmd_find_client to tell it whether or not to show errors, sometimes it's needed and sometimes not.
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.11 |
|
11-Jul-2012 |
nicm |
Make command exec functions return an enum rather than -1/0/1 values and add a new value to mean "leave client running but don't attach" to fix problems with using some commands in a command sequence. Most of the work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
|
#
1.10 |
|
18-Jun-2012 |
nicm |
Add -a flag for detach-client, from Thomas Adam.
|
Revision tags: OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.9 |
|
11-Apr-2011 |
nicm |
-s comes before -t and also add -s to command syntax. Prompted by jmc.
|
#
1.8 |
|
11-Apr-2011 |
nicm |
Add -s option to detach all clients attached to a session, from Zac Sprackett.
|
#
1.7 |
|
03-Mar-2011 |
nicm |
Add a -P option to detach to HUP the client's parent process (usually causing it to exit as well).
|
Revision tags: OPENBSD_4_9_BASE
|
#
1.6 |
|
04-Jan-2011 |
nicm |
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a struct with the command data which was then serialised and sent to the server to be executed. The parsing was later moved into the server (an argv was sent from the client), but the parse step and intermediate struct was kept.
This change removes that struct and the separate parse step. Argument parsing and printing is now common to all commands (in arguments.c) with each command left with just an optional check function (to validate the arguments at parse time), the exec function and a function to set up any key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although as this touches every command please watch for any unexpected changes.
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE
|
#
1.5 |
|
06-Feb-2010 |
nicm |
Support attaching a client read-only with a new -r flag to the attach-session command.
|
#
1.4 |
|
13-Nov-2009 |
nicm |
Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the command entry structs and a couple of functions to check/set the flags.
|
#
1.3 |
|
26-Jul-2009 |
nicm |
Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less sensitive to other changes in the code, particularly with commands. The client now packs argv into a buffer and sends it to the server for parsing, rather than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling code.
Mixing a server without this change and a client with or vice versa will cause tmux to hang or crash, please ensure that tmux is entirely killed before upgrading.
|
#
1.2 |
|
13-Jul-2009 |
nicm |
Having fixed flags for single-character getopt options is a bit hard to maintain and is only going to get worse as more are used. So instead, add a new uint64_t member to cmd_entry which is a bitmask of upper and lowercase options accepted by the command.
This means new single character options can be used without the need to add it explicitly to the list.
|
Revision tags: OPENBSD_4_6_BASE
|
#
1.1 |
|
01-Jun-2009 |
nicm |
Import tmux, a terminal multiplexor allowing (among other things) a single terminal to be switched between several different windows and programs displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
|
#
1.35 |
|
13-Apr-2020 |
nicm |
Make client -c and -t handling common in cmd-queue.c and try to be clearer about whether the client is the target client (must have a session) or not.
|
#
1.34 |
|
13-Apr-2020 |
nicm |
Also move cmdq_item and cmdq_list into cmd-queue.c (this is to make its use more clearly defined and preparation for some future work).
|
#
1.33 |
|
13-Apr-2020 |
nicm |
Make struct cmd local to cmd.c and move it out of tmux.h.
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE OPENBSD_6_4_BASE OPENBSD_6_5_BASE OPENBSD_6_6_BASE
|
#
1.32 |
|
22-Apr-2017 |
nicm |
Get rid of the extra layer of flags and cmd_prepare() and just store the CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
|
#
1.31 |
|
19-Apr-2017 |
nicm |
Add a suspend helper function, and do not allow detaching or suspending while already doing so.
|
Revision tags: OPENBSD_6_1_BASE
|
#
1.30 |
|
13-Jan-2017 |
nicm |
Add -E to detach-client to exec a command to replace the client instead of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
|
#
1.29 |
|
16-Oct-2016 |
nicm |
Mass rename struct cmd_q to struct cmdq_item and related.
|
#
1.28 |
|
10-Oct-2016 |
nicm |
Add static in cmd-* and fix a few other nits.
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE
|
#
1.27 |
|
19-Jan-2016 |
nicm |
I no longer use my SourceForge address so replace it.
|
#
1.26 |
|
14-Dec-2015 |
nicm |
Instead of combined flags for -c, -s, -t, split into different sets using an enum and simplify the parsing code.
|
#
1.25 |
|
13-Dec-2015 |
nicm |
Use member names in cmd_entry definitions so I stop getting confused about the order.
|
#
1.24 |
|
13-Dec-2015 |
nicm |
Instead of every command resolving the target (-t or -s) itself, prepare the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting.
This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements.
The old cmd_find_* functions remain for the moment but that layer will be dropped later.
Joint work with Thomas Adam.
|
#
1.23 |
|
08-Dec-2015 |
nicm |
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a couple of not very useful client hooks. This will eventually let commands be run at various points and on notifications. Joint work with Thomas Adam.
|
#
1.22 |
|
24-Nov-2015 |
nicm |
Fix usage of detach-client.
|
#
1.21 |
|
27-Oct-2015 |
nicm |
Break the common process set up, event loop and imsg dispatch code between server and client out into a separate internal API. This will make it easier to add another process.
|
Revision tags: OPENBSD_5_8_BASE
|
#
1.20 |
|
24-Apr-2015 |
nicm |
Convert clients list into a TAILQ.
|
Revision tags: OPENBSD_5_7_BASE
|
#
1.19 |
|
30-Jan-2015 |
nicm |
Tidy up detach-client a bit.
|
#
1.18 |
|
20-Oct-2014 |
nicm |
Move suspend-client code into detach-client.
|
#
1.17 |
|
20-Oct-2014 |
nicm |
Instead of setting up the default keys by building the key struct directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q.
As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
|
Revision tags: OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.16 |
|
15-Oct-2013 |
nicm |
Fix detach -a by skipping clients where the session is NULL.
|
#
1.15 |
|
10-Oct-2013 |
nicm |
Show session name in detached message. Requested by somebody a few months ago who didn't bother testing it. But it works for me anyway.
|
#
1.14 |
|
10-Oct-2013 |
nicm |
Remove the barely-used and unnecessary command check() function.
|
Revision tags: OPENBSD_5_4_BASE
|
#
1.13 |
|
24-Mar-2013 |
nicm |
Add a command queue to standardize and simplify commands that call other commands and allow a command to block execution of subsequent commands. This allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time from it. A command may suspend execution from the queue by returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited (unless attaching). A callback is also fired - this is used for nested commands in, for example, if-shell which can block execution of the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old curclient/cmdclient distinction - a cmdq is bound to one client (or none if in the configuration file), this is a command client if c->session is NULL otherwise an attached client.
|
#
1.12 |
|
24-Mar-2013 |
nicm |
Fix error reporting for client commands by adding a flag to cmd_find_client to tell it whether or not to show errors, sometimes it's needed and sometimes not.
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.11 |
|
11-Jul-2012 |
nicm |
Make command exec functions return an enum rather than -1/0/1 values and add a new value to mean "leave client running but don't attach" to fix problems with using some commands in a command sequence. Most of the work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
|
#
1.10 |
|
18-Jun-2012 |
nicm |
Add -a flag for detach-client, from Thomas Adam.
|
Revision tags: OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.9 |
|
11-Apr-2011 |
nicm |
-s comes before -t and also add -s to command syntax. Prompted by jmc.
|
#
1.8 |
|
11-Apr-2011 |
nicm |
Add -s option to detach all clients attached to a session, from Zac Sprackett.
|
#
1.7 |
|
03-Mar-2011 |
nicm |
Add a -P option to detach to HUP the client's parent process (usually causing it to exit as well).
|
Revision tags: OPENBSD_4_9_BASE
|
#
1.6 |
|
04-Jan-2011 |
nicm |
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a struct with the command data which was then serialised and sent to the server to be executed. The parsing was later moved into the server (an argv was sent from the client), but the parse step and intermediate struct was kept.
This change removes that struct and the separate parse step. Argument parsing and printing is now common to all commands (in arguments.c) with each command left with just an optional check function (to validate the arguments at parse time), the exec function and a function to set up any key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although as this touches every command please watch for any unexpected changes.
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE
|
#
1.5 |
|
06-Feb-2010 |
nicm |
Support attaching a client read-only with a new -r flag to the attach-session command.
|
#
1.4 |
|
13-Nov-2009 |
nicm |
Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the command entry structs and a couple of functions to check/set the flags.
|
#
1.3 |
|
26-Jul-2009 |
nicm |
Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less sensitive to other changes in the code, particularly with commands. The client now packs argv into a buffer and sends it to the server for parsing, rather than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling code.
Mixing a server without this change and a client with or vice versa will cause tmux to hang or crash, please ensure that tmux is entirely killed before upgrading.
|
#
1.2 |
|
13-Jul-2009 |
nicm |
Having fixed flags for single-character getopt options is a bit hard to maintain and is only going to get worse as more are used. So instead, add a new uint64_t member to cmd_entry which is a bitmask of upper and lowercase options accepted by the command.
This means new single character options can be used without the need to add it explicitly to the list.
|
Revision tags: OPENBSD_4_6_BASE
|
#
1.1 |
|
01-Jun-2009 |
nicm |
Import tmux, a terminal multiplexor allowing (among other things) a single terminal to be switched between several different windows and programs displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
|
#
1.34 |
|
13-Apr-2020 |
nicm |
Also move cmdq_item and cmdq_list into cmd-queue.c (this is to make its use more clearly defined and preparation for some future work).
|
#
1.33 |
|
13-Apr-2020 |
nicm |
Make struct cmd local to cmd.c and move it out of tmux.h.
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE OPENBSD_6_4_BASE OPENBSD_6_5_BASE OPENBSD_6_6_BASE
|
#
1.32 |
|
22-Apr-2017 |
nicm |
Get rid of the extra layer of flags and cmd_prepare() and just store the CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
|
#
1.31 |
|
19-Apr-2017 |
nicm |
Add a suspend helper function, and do not allow detaching or suspending while already doing so.
|
Revision tags: OPENBSD_6_1_BASE
|
#
1.30 |
|
13-Jan-2017 |
nicm |
Add -E to detach-client to exec a command to replace the client instead of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
|
#
1.29 |
|
16-Oct-2016 |
nicm |
Mass rename struct cmd_q to struct cmdq_item and related.
|
#
1.28 |
|
10-Oct-2016 |
nicm |
Add static in cmd-* and fix a few other nits.
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE
|
#
1.27 |
|
19-Jan-2016 |
nicm |
I no longer use my SourceForge address so replace it.
|
#
1.26 |
|
14-Dec-2015 |
nicm |
Instead of combined flags for -c, -s, -t, split into different sets using an enum and simplify the parsing code.
|
#
1.25 |
|
13-Dec-2015 |
nicm |
Use member names in cmd_entry definitions so I stop getting confused about the order.
|
#
1.24 |
|
13-Dec-2015 |
nicm |
Instead of every command resolving the target (-t or -s) itself, prepare the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting.
This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements.
The old cmd_find_* functions remain for the moment but that layer will be dropped later.
Joint work with Thomas Adam.
|
#
1.23 |
|
08-Dec-2015 |
nicm |
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a couple of not very useful client hooks. This will eventually let commands be run at various points and on notifications. Joint work with Thomas Adam.
|
#
1.22 |
|
24-Nov-2015 |
nicm |
Fix usage of detach-client.
|
#
1.21 |
|
27-Oct-2015 |
nicm |
Break the common process set up, event loop and imsg dispatch code between server and client out into a separate internal API. This will make it easier to add another process.
|
Revision tags: OPENBSD_5_8_BASE
|
#
1.20 |
|
24-Apr-2015 |
nicm |
Convert clients list into a TAILQ.
|
Revision tags: OPENBSD_5_7_BASE
|
#
1.19 |
|
30-Jan-2015 |
nicm |
Tidy up detach-client a bit.
|
#
1.18 |
|
20-Oct-2014 |
nicm |
Move suspend-client code into detach-client.
|
#
1.17 |
|
20-Oct-2014 |
nicm |
Instead of setting up the default keys by building the key struct directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q.
As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
|
Revision tags: OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.16 |
|
15-Oct-2013 |
nicm |
Fix detach -a by skipping clients where the session is NULL.
|
#
1.15 |
|
10-Oct-2013 |
nicm |
Show session name in detached message. Requested by somebody a few months ago who didn't bother testing it. But it works for me anyway.
|
#
1.14 |
|
10-Oct-2013 |
nicm |
Remove the barely-used and unnecessary command check() function.
|
Revision tags: OPENBSD_5_4_BASE
|
#
1.13 |
|
24-Mar-2013 |
nicm |
Add a command queue to standardize and simplify commands that call other commands and allow a command to block execution of subsequent commands. This allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time from it. A command may suspend execution from the queue by returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited (unless attaching). A callback is also fired - this is used for nested commands in, for example, if-shell which can block execution of the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old curclient/cmdclient distinction - a cmdq is bound to one client (or none if in the configuration file), this is a command client if c->session is NULL otherwise an attached client.
|
#
1.12 |
|
24-Mar-2013 |
nicm |
Fix error reporting for client commands by adding a flag to cmd_find_client to tell it whether or not to show errors, sometimes it's needed and sometimes not.
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.11 |
|
11-Jul-2012 |
nicm |
Make command exec functions return an enum rather than -1/0/1 values and add a new value to mean "leave client running but don't attach" to fix problems with using some commands in a command sequence. Most of the work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
|
#
1.10 |
|
18-Jun-2012 |
nicm |
Add -a flag for detach-client, from Thomas Adam.
|
Revision tags: OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.9 |
|
11-Apr-2011 |
nicm |
-s comes before -t and also add -s to command syntax. Prompted by jmc.
|
#
1.8 |
|
11-Apr-2011 |
nicm |
Add -s option to detach all clients attached to a session, from Zac Sprackett.
|
#
1.7 |
|
03-Mar-2011 |
nicm |
Add a -P option to detach to HUP the client's parent process (usually causing it to exit as well).
|
Revision tags: OPENBSD_4_9_BASE
|
#
1.6 |
|
04-Jan-2011 |
nicm |
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a struct with the command data which was then serialised and sent to the server to be executed. The parsing was later moved into the server (an argv was sent from the client), but the parse step and intermediate struct was kept.
This change removes that struct and the separate parse step. Argument parsing and printing is now common to all commands (in arguments.c) with each command left with just an optional check function (to validate the arguments at parse time), the exec function and a function to set up any key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although as this touches every command please watch for any unexpected changes.
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE
|
#
1.5 |
|
06-Feb-2010 |
nicm |
Support attaching a client read-only with a new -r flag to the attach-session command.
|
#
1.4 |
|
13-Nov-2009 |
nicm |
Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the command entry structs and a couple of functions to check/set the flags.
|
#
1.3 |
|
26-Jul-2009 |
nicm |
Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less sensitive to other changes in the code, particularly with commands. The client now packs argv into a buffer and sends it to the server for parsing, rather than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling code.
Mixing a server without this change and a client with or vice versa will cause tmux to hang or crash, please ensure that tmux is entirely killed before upgrading.
|
#
1.2 |
|
13-Jul-2009 |
nicm |
Having fixed flags for single-character getopt options is a bit hard to maintain and is only going to get worse as more are used. So instead, add a new uint64_t member to cmd_entry which is a bitmask of upper and lowercase options accepted by the command.
This means new single character options can be used without the need to add it explicitly to the list.
|
Revision tags: OPENBSD_4_6_BASE
|
#
1.1 |
|
01-Jun-2009 |
nicm |
Import tmux, a terminal multiplexor allowing (among other things) a single terminal to be switched between several different windows and programs displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
|
Revision tags: OPENBSD_6_2_BASE
|
#
1.32 |
|
22-Apr-2017 |
nicm |
Get rid of the extra layer of flags and cmd_prepare() and just store the CMD_FIND_* flags in the cmd_entry and call it for the command. Commands with special requirements call it themselves and update the target for hooks to use.
|
#
1.31 |
|
19-Apr-2017 |
nicm |
Add a suspend helper function, and do not allow detaching or suspending while already doing so.
|
Revision tags: OPENBSD_6_1_BASE
|
#
1.30 |
|
13-Jan-2017 |
nicm |
Add -E to detach-client to exec a command to replace the client instead of exiting it, useful if tmux wasn't exec'd itself. From Jenna Magius.
|
#
1.29 |
|
16-Oct-2016 |
nicm |
Mass rename struct cmd_q to struct cmdq_item and related.
|
#
1.28 |
|
10-Oct-2016 |
nicm |
Add static in cmd-* and fix a few other nits.
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE
|
#
1.27 |
|
19-Jan-2016 |
nicm |
I no longer use my SourceForge address so replace it.
|
#
1.26 |
|
14-Dec-2015 |
nicm |
Instead of combined flags for -c, -s, -t, split into different sets using an enum and simplify the parsing code.
|
#
1.25 |
|
13-Dec-2015 |
nicm |
Use member names in cmd_entry definitions so I stop getting confused about the order.
|
#
1.24 |
|
13-Dec-2015 |
nicm |
Instead of every command resolving the target (-t or -s) itself, prepare the state (client, session, winlink, pane) for it it before entering the command. Each command provides some flags that tell the prepare step what it is expecting.
This is a requirement for having hooks on commands (for example, if you hook "select-window -t1:2", the hook command should to operate on window 1:2 not whatever it thinks is the current window), and should allow some other target improvements.
The old cmd_find_* functions remain for the moment but that layer will be dropped later.
Joint work with Thomas Adam.
|
#
1.23 |
|
08-Dec-2015 |
nicm |
Add hooks infrastructure, basic commands (set-hook, show-hooks) and a couple of not very useful client hooks. This will eventually let commands be run at various points and on notifications. Joint work with Thomas Adam.
|
#
1.22 |
|
24-Nov-2015 |
nicm |
Fix usage of detach-client.
|
#
1.21 |
|
27-Oct-2015 |
nicm |
Break the common process set up, event loop and imsg dispatch code between server and client out into a separate internal API. This will make it easier to add another process.
|
Revision tags: OPENBSD_5_8_BASE
|
#
1.20 |
|
24-Apr-2015 |
nicm |
Convert clients list into a TAILQ.
|
Revision tags: OPENBSD_5_7_BASE
|
#
1.19 |
|
30-Jan-2015 |
nicm |
Tidy up detach-client a bit.
|
#
1.18 |
|
20-Oct-2014 |
nicm |
Move suspend-client code into detach-client.
|
#
1.17 |
|
20-Oct-2014 |
nicm |
Instead of setting up the default keys by building the key struct directly with a helper function in the cmd_entry, include a table of bind-key commands and pass them through the command parser and a temporary cmd_q.
As well as being smaller, this will allow default bindings to be command sequences which will probably be needed soon.
|
Revision tags: OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.16 |
|
15-Oct-2013 |
nicm |
Fix detach -a by skipping clients where the session is NULL.
|
#
1.15 |
|
10-Oct-2013 |
nicm |
Show session name in detached message. Requested by somebody a few months ago who didn't bother testing it. But it works for me anyway.
|
#
1.14 |
|
10-Oct-2013 |
nicm |
Remove the barely-used and unnecessary command check() function.
|
Revision tags: OPENBSD_5_4_BASE
|
#
1.13 |
|
24-Mar-2013 |
nicm |
Add a command queue to standardize and simplify commands that call other commands and allow a command to block execution of subsequent commands. This allows run-shell and if-shell to be synchronous which has been much requested.
Each client has a default command queue and commands are consumed one at a time from it. A command may suspend execution from the queue by returning CMD_RETURN_WAIT and then resume it by calling cmd_continue() - for example run-shell does this from the callback that is fired after the job is freed.
When the command queue becomes empty, command clients are automatically exited (unless attaching). A callback is also fired - this is used for nested commands in, for example, if-shell which can block execution of the client's cmdq until a new cmdq becomes empty.
Also merge all the old error/info/print functions together and lose the old curclient/cmdclient distinction - a cmdq is bound to one client (or none if in the configuration file), this is a command client if c->session is NULL otherwise an attached client.
|
#
1.12 |
|
24-Mar-2013 |
nicm |
Fix error reporting for client commands by adding a flag to cmd_find_client to tell it whether or not to show errors, sometimes it's needed and sometimes not.
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.11 |
|
11-Jul-2012 |
nicm |
Make command exec functions return an enum rather than -1/0/1 values and add a new value to mean "leave client running but don't attach" to fix problems with using some commands in a command sequence. Most of the work by Thomas Adam, problem reported by "jspenguin" on SF bug 3535531.
|
#
1.10 |
|
18-Jun-2012 |
nicm |
Add -a flag for detach-client, from Thomas Adam.
|
Revision tags: OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.9 |
|
11-Apr-2011 |
nicm |
-s comes before -t and also add -s to command syntax. Prompted by jmc.
|
#
1.8 |
|
11-Apr-2011 |
nicm |
Add -s option to detach all clients attached to a session, from Zac Sprackett.
|
#
1.7 |
|
03-Mar-2011 |
nicm |
Add a -P option to detach to HUP the client's parent process (usually causing it to exit as well).
|
Revision tags: OPENBSD_4_9_BASE
|
#
1.6 |
|
04-Jan-2011 |
nicm |
Clean up and simplify tmux command argument parsing.
Originally, tmux commands were parsed in the client process into a struct with the command data which was then serialised and sent to the server to be executed. The parsing was later moved into the server (an argv was sent from the client), but the parse step and intermediate struct was kept.
This change removes that struct and the separate parse step. Argument parsing and printing is now common to all commands (in arguments.c) with each command left with just an optional check function (to validate the arguments at parse time), the exec function and a function to set up any key bindings (renamed from the old init function).
This is overall more simple and consistent.
There should be no changes to any commands behaviour or syntax although as this touches every command please watch for any unexpected changes.
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE
|
#
1.5 |
|
06-Feb-2010 |
nicm |
Support attaching a client read-only with a new -r flag to the attach-session command.
|
#
1.4 |
|
13-Nov-2009 |
nicm |
Get rid of the ugly CMD_CHFLAG macro and use a const string (eg "dDU") in the command entry structs and a couple of functions to check/set the flags.
|
#
1.3 |
|
26-Jul-2009 |
nicm |
Make all messages sent between the client and server fixed size.
This is the first of two changes to make the protocol more resilient and less sensitive to other changes in the code, particularly with commands. The client now packs argv into a buffer and sends it to the server for parsing, rather than doing it itself and sending the parsed command data.
As a side-effect this also removes a lot of now-unused command marshalling code.
Mixing a server without this change and a client with or vice versa will cause tmux to hang or crash, please ensure that tmux is entirely killed before upgrading.
|
#
1.2 |
|
13-Jul-2009 |
nicm |
Having fixed flags for single-character getopt options is a bit hard to maintain and is only going to get worse as more are used. So instead, add a new uint64_t member to cmd_entry which is a bitmask of upper and lowercase options accepted by the command.
This means new single character options can be used without the need to add it explicitly to the list.
|
Revision tags: OPENBSD_4_6_BASE
|
#
1.1 |
|
01-Jun-2009 |
nicm |
Import tmux, a terminal multiplexor allowing (among other things) a single terminal to be switched between several different windows and programs displayed on one terminal be detached from one terminal and moved to another.
ok deraadt pirofti
|