remove some dead/squatted links

attempt to standardise the way we specify speeds in our name description (Nd)
lines;

sthen and deraadt argued for unit suffixes for speeds 1Gb+
deraadt also requested Gigabit be standardised to 1Gb

ok sthen deraadt ian benno

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Don't say or imply that using ifconfig has anything to do with whether the
hardware can transmit or receive jumbo frames.

use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@

remove "Using Jumbo frames can greatly improve performance for certain tasks"
sentence, discussed with deraadt.

within Rs/Re reference blocks, use %U instead of %O (or any other
variants) for URLs, allowing mandoc -Thtml to properly generate links;

(sendmail.8 changes are simply using Lk, which i somehow missed in previous)

ingo reminded me to verify that gnu groff recognises %U: 1.20.1 does not,
but 1.21 does;

Update for VLAN tag insertion and stripping support.

slight wording tweak to make the media selection entry consistent with
the entry further down.

Pull out some mostly useless info from these pages.

stray .El;

Remove mentioning of the link0 flag.

convert to new .Dd format;

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

LinkSys -> Linksys;
from jolan

{TrendNet,Trendware} -> TRENDnet, ok jsg@

no point in referencing vlan(4) when these drivers do not support it;
(sort of) from mike belopuhov;

be more specific with LinkSys EG1032 and EG1064 revs and mention EG1032
in the re(4) man page for v3.

only receive checksum offload now.

info about Jumbos and checksum offload

specify direction

nge(4) doesn't support VLAN tagging/insertion just yet.

List more phys that attach to these devices.
ok brad@

kill default locators

capitalize Fast Ethernet and Gigabit Ethernet

ok jmc

uppercase the `e' in Ethernet;

Improve layout.

corrections from Leandro Costa.

- corrections to tradenames
- updated URLs
- general typos

thanks Leandro!

1000baseTX -> 1000baseT
thanks to miod for pointing this out

Incomplete section 4 mi manual page cleanup.
- make configuration lines match GENERIC files
- more Xr (hopefully usefule Xr)
- never mention intro(4) on non-physical devices (i.e. protocols), always
mention it for physical devices
- random text style and quoting fixes
- drivers ported from FreeBSD did mention rc.conf instead of hostname.if as
the place to put mediaopt
- some .Tn UNIX -> .Ox replacements
- etc, etc...

reviewd in part by deraadt@ (until he got bored of this)

update list of supported devices

Xr cleanup; seb@todesplanet.de

spelling

add .Xr's for phys and macs that are found together
Remove the .Xr pci 4 from phys
update .Xr's for gigabit phys to include arp(4), ifmedia(4), intro(4),
netintro(4), pci(4), vlan(4) (if applicable), and ifconfig(8). (In
addition to t .Xr's for phys
update intro(4) for alpha and i386

Avoid confustion

Fix SYNOPSIS

Update list of cards supported by nge(4)
Fix a typo

spelling

UDP checksumming as well, and turned off if the MTU is too large.

install and repair

Add manpage for National Semiconductor Gigabit (nge)

attempt to standardise the way we specify speeds in our name description (Nd)
lines;

sthen and deraadt argued for unit suffixes for speeds 1Gb+
deraadt also requested Gigabit be standardised to 1Gb

ok sthen deraadt ian benno

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Don't say or imply that using ifconfig has anything to do with whether the
hardware can transmit or receive jumbo frames.

use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@

remove "Using Jumbo frames can greatly improve performance for certain tasks"
sentence, discussed with deraadt.

within Rs/Re reference blocks, use %U instead of %O (or any other
variants) for URLs, allowing mandoc -Thtml to properly generate links;

(sendmail.8 changes are simply using Lk, which i somehow missed in previous)

ingo reminded me to verify that gnu groff recognises %U: 1.20.1 does not,
but 1.21 does;

Update for VLAN tag insertion and stripping support.

slight wording tweak to make the media selection entry consistent with
the entry further down.

Pull out some mostly useless info from these pages.

stray .El;

Remove mentioning of the link0 flag.

convert to new .Dd format;

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

LinkSys -> Linksys;
from jolan

{TrendNet,Trendware} -> TRENDnet, ok jsg@

no point in referencing vlan(4) when these drivers do not support it;
(sort of) from mike belopuhov;

be more specific with LinkSys EG1032 and EG1064 revs and mention EG1032
in the re(4) man page for v3.

only receive checksum offload now.

info about Jumbos and checksum offload

specify direction

nge(4) doesn't support VLAN tagging/insertion just yet.

List more phys that attach to these devices.
ok brad@

kill default locators

capitalize Fast Ethernet and Gigabit Ethernet

ok jmc

uppercase the `e' in Ethernet;

Improve layout.

corrections from Leandro Costa.

- corrections to tradenames
- updated URLs
- general typos

thanks Leandro!

1000baseTX -> 1000baseT
thanks to miod for pointing this out

Incomplete section 4 mi manual page cleanup.
- make configuration lines match GENERIC files
- more Xr (hopefully usefule Xr)
- never mention intro(4) on non-physical devices (i.e. protocols), always
mention it for physical devices
- random text style and quoting fixes
- drivers ported from FreeBSD did mention rc.conf instead of hostname.if as
the place to put mediaopt
- some .Tn UNIX -> .Ox replacements
- etc, etc...

reviewd in part by deraadt@ (until he got bored of this)

update list of supported devices

Xr cleanup; seb@todesplanet.de

spelling

add .Xr's for phys and macs that are found together
Remove the .Xr pci 4 from phys
update .Xr's for gigabit phys to include arp(4), ifmedia(4), intro(4),
netintro(4), pci(4), vlan(4) (if applicable), and ifconfig(8). (In
addition to t .Xr's for phys
update intro(4) for alpha and i386

Avoid confustion

Fix SYNOPSIS

Update list of cards supported by nge(4)
Fix a typo

spelling

UDP checksumming as well, and turned off if the MTU is too large.

install and repair

Add manpage for National Semiconductor Gigabit (nge)

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Don't say or imply that using ifconfig has anything to do with whether the
hardware can transmit or receive jumbo frames.

use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@

remove "Using Jumbo frames can greatly improve performance for certain tasks"
sentence, discussed with deraadt.

within Rs/Re reference blocks, use %U instead of %O (or any other
variants) for URLs, allowing mandoc -Thtml to properly generate links;

(sendmail.8 changes are simply using Lk, which i somehow missed in previous)

ingo reminded me to verify that gnu groff recognises %U: 1.20.1 does not,
but 1.21 does;

Update for VLAN tag insertion and stripping support.

slight wording tweak to make the media selection entry consistent with
the entry further down.

Pull out some mostly useless info from these pages.

stray .El;

Remove mentioning of the link0 flag.

convert to new .Dd format;

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

LinkSys -> Linksys;
from jolan

{TrendNet,Trendware} -> TRENDnet, ok jsg@

no point in referencing vlan(4) when these drivers do not support it;
(sort of) from mike belopuhov;

be more specific with LinkSys EG1032 and EG1064 revs and mention EG1032
in the re(4) man page for v3.

only receive checksum offload now.

info about Jumbos and checksum offload

specify direction

nge(4) doesn't support VLAN tagging/insertion just yet.

List more phys that attach to these devices.
ok brad@

kill default locators

capitalize Fast Ethernet and Gigabit Ethernet

ok jmc

uppercase the `e' in Ethernet;

Improve layout.

corrections from Leandro Costa.

- corrections to tradenames
- updated URLs
- general typos

thanks Leandro!

1000baseTX -> 1000baseT
thanks to miod for pointing this out

Incomplete section 4 mi manual page cleanup.
- make configuration lines match GENERIC files
- more Xr (hopefully usefule Xr)
- never mention intro(4) on non-physical devices (i.e. protocols), always
mention it for physical devices
- random text style and quoting fixes
- drivers ported from FreeBSD did mention rc.conf instead of hostname.if as
the place to put mediaopt
- some .Tn UNIX -> .Ox replacements
- etc, etc...

reviewd in part by deraadt@ (until he got bored of this)

update list of supported devices

Xr cleanup; seb@todesplanet.de

spelling

add .Xr's for phys and macs that are found together
Remove the .Xr pci 4 from phys
update .Xr's for gigabit phys to include arp(4), ifmedia(4), intro(4),
netintro(4), pci(4), vlan(4) (if applicable), and ifconfig(8). (In
addition to t .Xr's for phys
update intro(4) for alpha and i386

Avoid confustion

Fix SYNOPSIS

Update list of cards supported by nge(4)
Fix a typo

spelling

UDP checksumming as well, and turned off if the MTU is too large.

install and repair

Add manpage for National Semiconductor Gigabit (nge)