attempt to standardise the way we specify speeds in our name description (Nd)
lines;

sthen and deraadt argued for unit suffixes for speeds 1Gb+
deraadt also requested Gigabit be standardised to 1Gb

ok sthen deraadt ian benno

add I219 to the list of supported chips
OK bluhm@

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Bring this up to date for recent additions to if_em

Mention the TX checksum offload support.

Remove mentioning specific systems with embedded Ethernet chipsets or
LOM in vge(4) which is pretty vague and common to many Ethernet chipsets.

ok kettenis@

Mention Soekris hw.

ok sthen@

add I350

mention 82580 and also mention the 8257[789] phy models as the
pch devices are normally referenced this way instead of the pch model.

document support for 82583V: according to cvs, yasuoka added this 19.9.10;
diff from Steffen Daode Nurpmeso

Improve the layout by moving the paragraph describing the hardware features
supported by the driver below the list of supported hardware. From Brad.

tweak previous;

gcu(4) manpage, add information bout EP80579 support to em(4) as well

'just go ahead' deraadt@

List some newer supported hardware, from Brad.

Add 82574L to the list of supported MACs.

Document some of the newer Intel cards that are now supported. Also add
two supermicro ones that should work (actually I developped it on the first
supermicro one).

Update for VLAN tag insertion and stripping support.

Add 82571GB/82572GI to the list.

"The devices can also have a 82571GB or 82572GI marking (instead of
82571EB or 82572EI); the 82571GB and 82572GI devices are used only on
Intel network interface adapters. The 82571GB is functionally equivalent
to the 82571EB and the 82572GI is functionally equivalent to the
82572EI."

From ftp://download.intel.com/design/network/specupdt/82571EB_72EI.pdf

Indeed the 82572GI shows up as the "Intel PRO/1000 PT (82572EI)" pci id.

Add newer HP and Sun Gigabit Ethernet adapters.

convert to new .Dd format;

add the HP ProLiant NC360T PCI Express Dual Port Gigabit NIC (tested
ok), the NC340T is a quad port NIC, and the NC7170/NC7170LP are dual
port NICs.

add two newer Intel quad port adapters.

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

mention the 82562V chipset.

add 1000BaseLX

mention a few of the newer chips.

sync the description for em.4;

update with new chipset revs.

remove DIAGNOSTICS and an e-mail address that does not work anyway.

add the HP ProLiant NC340T PCI-X quad port adapter.

list HP Intel-based Gigabit NICs.

Lo -> Low

Typo; p/o kustov@telex221.ru.

list Intel's PCI Express line of cards.

mention newer PCI Express chips.

no point in referencing vlan(4) when these drivers do not support it;
(sort of) from mike belopuhov;

mention new 82573E chipset

put a bit spacing in, and sort the list;

- update list of chips
- mention transmit checksum offload and that we're checksumming for TCP/UDP traffic
- adds BUGS section with some important info from the README, why would FreeBSD
include the important info in their man page, that makes too much sense

mention more chips, jumbo frames and receive checksum offload.

kill default locators

capitalize Fast Ethernet and Gigabit Ethernet

ok jmc

Improve layout.

typo; PR3618; Jonathan Fromer

snc list of supported controllers with reality

remove unneeded .Pp;

new one that is supported

- section reorder
- some macro fixes
- kill whitespace at EOL

date should be written formally: .Dd Month day, year
also fixes a few misspellings of the month
ok henning@ jmc@

Don't forget the 82545

1000baseTX -> 1000baseT
thanks to miod for pointing this out

Incomplete section 4 mi manual page cleanup.
- make configuration lines match GENERIC files
- more Xr (hopefully usefule Xr)
- never mention intro(4) on non-physical devices (i.e. protocols), always
mention it for physical devices
- random text style and quoting fixes
- drivers ported from FreeBSD did mention rc.conf instead of hostname.if as
the place to put mediaopt
- some .Tn UNIX -> .Ox replacements
- etc, etc...

reviewd in part by deraadt@ (until he got bored of this)

typo

make this more like others

Manpage for em(4). Intel gigabit ethernet driver

add I219 to the list of supported chips
OK bluhm@

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Bring this up to date for recent additions to if_em

Mention the TX checksum offload support.

Remove mentioning specific systems with embedded Ethernet chipsets or
LOM in vge(4) which is pretty vague and common to many Ethernet chipsets.

ok kettenis@

Mention Soekris hw.

ok sthen@

add I350

mention 82580 and also mention the 8257[789] phy models as the
pch devices are normally referenced this way instead of the pch model.

document support for 82583V: according to cvs, yasuoka added this 19.9.10;
diff from Steffen Daode Nurpmeso

Improve the layout by moving the paragraph describing the hardware features
supported by the driver below the list of supported hardware. From Brad.

tweak previous;

gcu(4) manpage, add information bout EP80579 support to em(4) as well

'just go ahead' deraadt@

List some newer supported hardware, from Brad.

Add 82574L to the list of supported MACs.

Document some of the newer Intel cards that are now supported. Also add
two supermicro ones that should work (actually I developped it on the first
supermicro one).

Update for VLAN tag insertion and stripping support.

Add 82571GB/82572GI to the list.

"The devices can also have a 82571GB or 82572GI marking (instead of
82571EB or 82572EI); the 82571GB and 82572GI devices are used only on
Intel network interface adapters. The 82571GB is functionally equivalent
to the 82571EB and the 82572GI is functionally equivalent to the
82572EI."

From ftp://download.intel.com/design/network/specupdt/82571EB_72EI.pdf

Indeed the 82572GI shows up as the "Intel PRO/1000 PT (82572EI)" pci id.

Add newer HP and Sun Gigabit Ethernet adapters.

convert to new .Dd format;

add the HP ProLiant NC360T PCI Express Dual Port Gigabit NIC (tested
ok), the NC340T is a quad port NIC, and the NC7170/NC7170LP are dual
port NICs.

add two newer Intel quad port adapters.

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

mention the 82562V chipset.

add 1000BaseLX

mention a few of the newer chips.

sync the description for em.4;

update with new chipset revs.

remove DIAGNOSTICS and an e-mail address that does not work anyway.

add the HP ProLiant NC340T PCI-X quad port adapter.

list HP Intel-based Gigabit NICs.

Lo -> Low

Typo; p/o kustov@telex221.ru.

list Intel's PCI Express line of cards.

mention newer PCI Express chips.

no point in referencing vlan(4) when these drivers do not support it;
(sort of) from mike belopuhov;

mention new 82573E chipset

put a bit spacing in, and sort the list;

- update list of chips
- mention transmit checksum offload and that we're checksumming for TCP/UDP traffic
- adds BUGS section with some important info from the README, why would FreeBSD
include the important info in their man page, that makes too much sense

mention more chips, jumbo frames and receive checksum offload.

kill default locators

capitalize Fast Ethernet and Gigabit Ethernet

ok jmc

Improve layout.

typo; PR3618; Jonathan Fromer

snc list of supported controllers with reality

remove unneeded .Pp;

new one that is supported

- section reorder
- some macro fixes
- kill whitespace at EOL

date should be written formally: .Dd Month day, year
also fixes a few misspellings of the month
ok henning@ jmc@

Don't forget the 82545

1000baseTX -> 1000baseT
thanks to miod for pointing this out

Incomplete section 4 mi manual page cleanup.
- make configuration lines match GENERIC files
- more Xr (hopefully usefule Xr)
- never mention intro(4) on non-physical devices (i.e. protocols), always
mention it for physical devices
- random text style and quoting fixes
- drivers ported from FreeBSD did mention rc.conf instead of hostname.if as
the place to put mediaopt
- some .Tn UNIX -> .Ox replacements
- etc, etc...

reviewd in part by deraadt@ (until he got bored of this)

typo

make this more like others

Manpage for em(4). Intel gigabit ethernet driver