adjust Xr for fw_update to section 8;
ok afresh sthen deraadt

Use ifconfig(8)'s "join" command by default

Its adoption went quite well, so install "join" rather than the old "nwid"
in new hostname.if(5) files and follow this trend in our wifi manuals.

OK deraadt sthen

Teach modern "inet autoconf"

This goes in line with hostname.if(5), unwind.conf(5), ifconfig(8)
as well as our installer.

OK deraadt

Document that bwi(4) disables BCM4331 chips by intention.

Suggested, help, and OK ian@

for the net80211 drivers supporting WPA, update to a new unified text showing
that WPA1 is disabled by default, and provide a couple of extra pointers about
configuration. direction of change proposed by stsp, ok jmc stsp

document that these drivers do not support powersave; two other pages (acu and zyd)
already document this in a slightly more tangled way - i chose not to edit those texts;

help/ok stsp

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@

Use ifconfig(8)'s "join" command by default

Its adoption went quite well, so install "join" rather than the old "nwid"
in new hostname.if(5) files and follow this trend in our wifi manuals.

OK deraadt sthen

Teach modern "inet autoconf"

This goes in line with hostname.if(5), unwind.conf(5), ifconfig(8)
as well as our installer.

OK deraadt

Document that bwi(4) disables BCM4331 chips by intention.

Suggested, help, and OK ian@

for the net80211 drivers supporting WPA, update to a new unified text showing
that WPA1 is disabled by default, and provide a couple of extra pointers about
configuration. direction of change proposed by stsp, ok jmc stsp

document that these drivers do not support powersave; two other pages (acu and zyd)
already document this in a slightly more tangled way - i chose not to edit those texts;

help/ok stsp

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@

Teach modern "inet autoconf"

This goes in line with hostname.if(5), unwind.conf(5), ifconfig(8)
as well as our installer.

OK deraadt

Document that bwi(4) disables BCM4331 chips by intention.

Suggested, help, and OK ian@

for the net80211 drivers supporting WPA, update to a new unified text showing
that WPA1 is disabled by default, and provide a couple of extra pointers about
configuration. direction of change proposed by stsp, ok jmc stsp

document that these drivers do not support powersave; two other pages (acu and zyd)
already document this in a slightly more tangled way - i chose not to edit those texts;

help/ok stsp

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@

Document that bwi(4) disables BCM4331 chips by intention.

Suggested, help, and OK ian@

for the net80211 drivers supporting WPA, update to a new unified text showing
that WPA1 is disabled by default, and provide a couple of extra pointers about
configuration. direction of change proposed by stsp, ok jmc stsp

document that these drivers do not support powersave; two other pages (acu and zyd)
already document this in a slightly more tangled way - i chose not to edit those texts;

help/ok stsp

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@

for the net80211 drivers supporting WPA, update to a new unified text showing
that WPA1 is disabled by default, and provide a couple of extra pointers about
configuration. direction of change proposed by stsp, ok jmc stsp

document that these drivers do not support powersave; two other pages (acu and zyd)
already document this in a slightly more tangled way - i chose not to edit those texts;

help/ok stsp

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@

document that these drivers do not support powersave; two other pages (acu and zyd)
already document this in a slightly more tangled way - i chose not to edit those texts;

help/ok stsp

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@

adjust hostname.if examples to show "wpakey" on the same line as "nwid"

OK jmc@

jmc notes that the previous commit made for some funny wording.
WPA is the current standard, but not the only one. ok krw

WPA is a real standard, not only a de facto one.
(these man pages do like their copy and paste.)

use .Dx to credit DragonFly; from Jan Stary <hans at stare dot cz>

commented out Host AP documentation gives grep false hope.

rework EXAMPLES somewhat, and remove the obsolete NONE NONE NONE dhcp
stuff; ok krw

Update wording for device firmware to talk update fw_update(1).
Noticed by jcs, discussed with jmc, ok jmc ajacoutot dcoppa deraadt

use Lk for links;

make -column lists pretty again;

specifically, rewrite them to permit some markup in the column headers,
and use "Ta" instead of literal tabs; mandoc does not currently match groff
100%, but a mandoc fix may be some time off, and we've gone enough releases
with poorly formatting column lists.

in some cases i have rewritten the lists as -tag, where -column made
little sense.

as with other list types, column lists generally do not need a Pp/-compact
construct;

this also sidesteps what seems to be a problem with mandoc, in that
"-column -compact" seems to mess up the formatting. thus these pages should
now have their lists formatted nicely (i.e. correctly aligned and with indent
applied);

as a side note, the fact that headers are not properly marked up is another
issue which will be addressed separately (a mandoc fix is needed, i think).
i have fudged a few of these to mark up properly, since the workaround does
make sense for some pages.

as another side note, i haven;t fixed man7, as i need to prepare a separate
diff for kristaps and ingo.

firmwares move to a new url, backed by many addresses

- switch from wpapsk to wpakey
- remove the "return device to default settings" example, which theo says
is rubbish

ok deraadt

OpenBSD -> .Ox;

crikey! all our wireless pages had the Os macro out of place;

- tweak the way firmware links are displayed

with and ok jmc@

.Bl always requires .It, even in .Bl -column;
syntax errors found by mandoc(1), also required to fix the mandoc build;
feedback and ok jmc@ and sobrado@

the `W' in WEP apparently stands for wired, not wireless;
from Scott Radvan

tweak previous;

Mention known signal problems and firmware version 3 only support so
people don't have to report about those topics on a regulary base.

a jsg@ joint venture production

use `` instead of $(), since the former works for both csh and ksh; as
pointed out by claudio

- beef up the text on wep/wpa
- simplify wpa example

help/ok damien

document WPA-PSK support.

"i would really appreciate just something going in" jmc@

remove the CONFIGURATION section from the wireless pages:
the addition of the wpa options have shown just how unwieldy it had
become, it's already in ifconfig(8) anyway, and "ifconfig -m" will
get the relevant ones.

ok dlg jsg

Add TRENDnet TEW-401PCplus CardBus adapter.

Reported by Inigo Tejedor Arrondo.

Bump firmware version; Adapt to new package mechanism by rebuilding
those firmware packages. Solves ``Warning: obsolete construct: @ignore''.

Since we know the firmware load works, merge the single firmware files
together to one single, finally.

You need to bump the firmware package to version 1.3!

OK jsg@

sort the hardware list;

Add Apple Airport Extreme devices.

From brad@, OK jsg@

Zap HostAP examples for now.

Pointed out by jmc@

Add monitor mediaopt. Diff from brad@

Disable HostAP and IBSS mediaopt while there.

Broadcom -> Broadcom AirForce. Add new device to HW list.

From brad@

keep the hardware list sorted;

Add new device reported by brad@. Remove dummy device.

Add my working Compaq R4035 onboard BCM4306. ok mglocker@

Add cards I've tested.

The listed Linksys device is CardBus, not PCI.

Add ASUS WL-138g device. From Oleg Safiullin.

Bump firmware package to version 1.2.

Adapt firmware images prefix to driver name. Needs bump to firmware
package version 1.1.

Fix docdate CVS tag.

Add initial man page for bwi(4). Points to the firmware package.

OK jsg@