attempt to standardise the way we specify speeds in our name description (Nd)
lines;

sthen and deraadt argued for unit suffixes for speeds 1Gb+
deraadt also requested Gigabit be standardised to 1Gb

ok sthen deraadt ian benno

remove macro instances from arbitrary string width specifiers. for example

-width ".Dv BOB" -> -width "BOB"

although they are not errors, they are misleading and probably should
not get pasted around

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Mention the TX checksum offload support.

use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@

Remove mentioning specific systems with embedded Ethernet chipsets or
LOM in vge(4) which is pretty vague and common to many Ethernet chipsets.

ok kettenis@

List some newer supported hardware, from Brad.

document support for the bcm5709 and bcm5716, and the new firmware files
the driver uses.

add some more dell boxes i know of that use bnx.

"go for it" deraadt@

Update for VLAN tag insertion and stripping support.

Only full-dupex is supported for 1000baseT.

Update for the fibre support.

comment fix; from Pierre Riteau

Add newer HP and Sun Gigabit Ethernet adapters.

Dell PowerEdge 2970 has bnx(4) too. OK marco@

1000baseTX -> 1000baseT

ok dlg@

Revert r1.42 of if_bnx.c, "Enable IPv4 transmit TCP/UDP checksum
offload", and associated man page change. To use IPv4 transmit TCP/UDP
checksum offloading you must again define BNX_CSUM.

As requested by mbalmer@ via deraadt@ on suggestion of reyk@ in
response to PR #5437.

convert to new .Dd format;

no jumbosity for bnx
from brad; ok reyk

Enable transmit TCP/UDP checksum offload.

From Brad, tested by Brad, biorn@ and Johan M:son Lindman.

add the HP NC373i PCI Express Multifunction Gigabit embedded server
adapter as found on the latest HP ProLiant servers (DL365 G1, DL385
G2, DL585 G2).

tagging -> tag insertion

VLAN tagging

document /etc/firmware/bnx

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

Jumbo's

RX checksum offload.

add -nosplit to AUTHORS;

add myself.

add a few Dell/IBM servers and a few HP adapters.

tweaks;

I'm not sure where the NC370i came from, but HP definitely makes a NC370F,
which is a fibre 1000baseSX adapter.

add a man page.

remove macro instances from arbitrary string width specifiers. for example

-width ".Dv BOB" -> -width "BOB"

although they are not errors, they are misleading and probably should
not get pasted around

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Mention the TX checksum offload support.

use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@

Remove mentioning specific systems with embedded Ethernet chipsets or
LOM in vge(4) which is pretty vague and common to many Ethernet chipsets.

ok kettenis@

List some newer supported hardware, from Brad.

document support for the bcm5709 and bcm5716, and the new firmware files
the driver uses.

add some more dell boxes i know of that use bnx.

"go for it" deraadt@

Update for VLAN tag insertion and stripping support.

Only full-dupex is supported for 1000baseT.

Update for the fibre support.

comment fix; from Pierre Riteau

Add newer HP and Sun Gigabit Ethernet adapters.

Dell PowerEdge 2970 has bnx(4) too. OK marco@

1000baseTX -> 1000baseT

ok dlg@

Revert r1.42 of if_bnx.c, "Enable IPv4 transmit TCP/UDP checksum
offload", and associated man page change. To use IPv4 transmit TCP/UDP
checksum offloading you must again define BNX_CSUM.

As requested by mbalmer@ via deraadt@ on suggestion of reyk@ in
response to PR #5437.

convert to new .Dd format;

no jumbosity for bnx
from brad; ok reyk

Enable transmit TCP/UDP checksum offload.

From Brad, tested by Brad, biorn@ and Johan M:son Lindman.

add the HP NC373i PCI Express Multifunction Gigabit embedded server
adapter as found on the latest HP ProLiant servers (DL365 G1, DL385
G2, DL585 G2).

tagging -> tag insertion

VLAN tagging

document /etc/firmware/bnx

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

Jumbo's

RX checksum offload.

add -nosplit to AUTHORS;

add myself.

add a few Dell/IBM servers and a few HP adapters.

tweaks;

I'm not sure where the NC370i came from, but HP definitely makes a NC370F,
which is a fibre 1000baseSX adapter.

add a man page.

- Don't capitalize jumbo.
- Don't try to keep track of jumbo frame sizes in the pages. Users can
use `ifconfig hwfeatures' to determine what the hardware supports.

Mention the TX checksum offload support.

use .Mt for email addresses; from Jan Stary <hans at stare dot cz>; ok jmc@

Remove mentioning specific systems with embedded Ethernet chipsets or
LOM in vge(4) which is pretty vague and common to many Ethernet chipsets.

ok kettenis@

List some newer supported hardware, from Brad.

document support for the bcm5709 and bcm5716, and the new firmware files
the driver uses.

add some more dell boxes i know of that use bnx.

"go for it" deraadt@

Update for VLAN tag insertion and stripping support.

Only full-dupex is supported for 1000baseT.

Update for the fibre support.

comment fix; from Pierre Riteau

Add newer HP and Sun Gigabit Ethernet adapters.

Dell PowerEdge 2970 has bnx(4) too. OK marco@

1000baseTX -> 1000baseT

ok dlg@

Revert r1.42 of if_bnx.c, "Enable IPv4 transmit TCP/UDP checksum
offload", and associated man page change. To use IPv4 transmit TCP/UDP
checksum offloading you must again define BNX_CSUM.

As requested by mbalmer@ via deraadt@ on suggestion of reyk@ in
response to PR #5437.

convert to new .Dd format;

no jumbosity for bnx
from brad; ok reyk

Enable transmit TCP/UDP checksum offload.

From Brad, tested by Brad, biorn@ and Johan M:son Lindman.

add the HP NC373i PCI Express Multifunction Gigabit embedded server
adapter as found on the latest HP ProLiant servers (DL365 G1, DL385
G2, DL585 G2).

tagging -> tag insertion

VLAN tagging

document /etc/firmware/bnx

the start of making .Nd lines more useful for section4;
this diff addresses ethernet devices only

input from nick jsg deraadt, maybe some others

Jumbo's

RX checksum offload.

add -nosplit to AUTHORS;

add myself.

add a few Dell/IBM servers and a few HP adapters.

tweaks;

I'm not sure where the NC370i came from, but HP definitely makes a NC370F,
which is a fibre 1000baseSX adapter.

add a man page.