#
1.28 |
|
24-Oct-2021 |
deraadt |
For open/openat, if the flags parameter does not contain O_CREAT, the 3rd (variadic) mode_t parameter is irrelevant. Many developers in the past have passed mode_t (0, 044, 0644, or such), which might lead future people to copy this broken idiom, and perhaps even believe this parameter has some meaning or implication or application. Delete them all. This comes out of a conversation where tb@ noticed that a strange (but intentional) pledge behaviour is to always knock-out high-bits from mode_t on a number of system calls as a safety factor, and his bewilderment that this appeared to be happening against valid modes (at least visually), but no sorry, they are all irrelevant junk. They could all be 0xdeafbeef. ok millert
|
Revision tags: OPENBSD_6_6_BASE OPENBSD_6_7_BASE OPENBSD_6_8_BASE OPENBSD_6_9_BASE OPENBSD_7_0_BASE
|
#
1.27 |
|
28-Jun-2019 |
deraadt |
When system calls indicate an error they return -1, not some arbitrary value < 0. errno is only updated in this case. Change all (most?) callers of syscalls to follow this better, and let's see if this strictness helps us in the future.
|
Revision tags: OPENBSD_6_5_BASE
|
#
1.26 |
|
16-Feb-2019 |
bluhm |
Implement the conv=fsync feature which does an fsync(2) after the final write to output. GNU dd also has this. It is useful for write performance measurement or guaranteed writes to reliable storage. OK kn@ tedu@ deraadt@
|
Revision tags: OPENBSD_6_4_BASE
|
#
1.25 |
|
23-Jul-2018 |
cheloha |
Don't cast malloc(3) size to u_int.
Large buffer sizes on 64-bit platforms cause the sum to wrap, leading read(2) to fail later.
We check prior to this point that all buffer sizes are <= SSIZE_MAX. SSIZE_MAX * 2 < SIZE_MAX on all platforms, so the addition here will not overflow and cause a similar issue.
Discovered by tobias@ a while back.
ok deraadt millert tobias
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE
|
#
1.24 |
|
13-Aug-2017 |
tedu |
convert gettimeofday to mono clock. from Scott Cheloha
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE OPENBSD_6_1_BASE
|
#
1.23 |
|
09-Oct-2015 |
deraadt |
Change all tame callers to namechange to pledge(2).
|
#
1.22 |
|
04-Oct-2015 |
deraadt |
after dd has opened it's files and done the tape positioning ioctl, we can tame "stdio" it. ok semarie
|
Revision tags: OPENBSD_5_7_BASE OPENBSD_5_8_BASE
|
#
1.21 |
|
16-Jan-2015 |
deraadt |
Replace <sys/param.h> with <limits.h> and other less dirty headers where possible. Annotate <sys/param.h> lines with their current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1, LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution. These are the files confirmed through binary verification. ok guenther, millert, doug (helped with the verification protocol)
|
#
1.20 |
|
05-Jan-2015 |
tedu |
use the correct read count when determining how swabbing is necessary. bug report from Martin Wolters
|
#
1.19 |
|
11-Dec-2014 |
tedu |
use a local swapbytes function instead of relying on undefined overlapping swab behavior. vaguely ok kettenis
|
Revision tags: OPENBSD_5_4_BASE OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.18 |
|
01-Jun-2013 |
tedu |
consolidate ifdef blocks by moving a variable
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.17 |
|
12-Jul-2012 |
millert |
Use S_ISFIFO and S_ISSOCK instead of lseek() to determine whether an fd is a socket, pipe or named pipe. OK deraadt@ matthew@
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE OPENBSD_4_9_BASE OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.16 |
|
27-Oct-2009 |
deraadt |
rcsid[] and sccsid[] and copyright[] are essentially unmaintained (and unmaintainable). these days, people use source. these id's do not provide any benefit, and do hurt the small install media (the 33,000 line diff is essentially mechanical) ok with the idea millert, ok dms
|
Revision tags: OPENBSD_4_3_BASE OPENBSD_4_4_BASE OPENBSD_4_5_BASE OPENBSD_4_6_BASE
|
#
1.15 |
|
10-Nov-2007 |
chl |
remove "unused variable" warning appearing when building release
ok millert@
|
Revision tags: OPENBSD_3_4_BASE OPENBSD_3_5_BASE OPENBSD_3_6_BASE OPENBSD_3_7_BASE OPENBSD_3_8_BASE OPENBSD_3_9_BASE OPENBSD_4_0_BASE OPENBSD_4_1_BASE OPENBSD_4_2_BASE
|
#
1.14 |
|
11-Jun-2003 |
deraadt |
ansification, art ok
|
#
1.13 |
|
02-Jun-2003 |
millert |
Remove the advertising clause in the UCB license which Berkeley rescinded 22 July 1999. Proofed by myself and Theo.
|
Revision tags: OPENBSD_3_1_BASE OPENBSD_3_2_BASE OPENBSD_3_3_BASE
|
#
1.12 |
|
16-Feb-2002 |
millert |
Part one of userland __P removal. Done with a simple regexp with some minor hand editing to make comments line up correctly. Another pass is forthcoming that handles the cases that could not be done automatically.
|
Revision tags: OPENBSD_3_0_BASE
|
#
1.11 |
|
06-Oct-2001 |
millert |
Fix ``echo foo |dd'' which was broken by the last commit.
|
#
1.10 |
|
04-Oct-2001 |
millert |
Move check for count=0 into dd's main. We want to do normal setup in this case and just don't want to actually copy any data. Fixes a problem noted by aaron@ where the time portion of the summary would be wrong and also gives us sane behavior when seek is non-zero but count is 0.
|
#
1.9 |
|
07-Aug-2001 |
hugh |
Modify timekeeping in an effort to produce a sane bandwidth measure for a short running dd process. Some floating point is used so that microsecond precision can be kept without shortening the off_t excessively. millert says ok.
|
Revision tags: OPENBSD_2_4_BASE OPENBSD_2_5_BASE OPENBSD_2_6_BASE OPENBSD_2_7_BASE OPENBSD_2_8_BASE OPENBSD_2_9_BASE
|
#
1.8 |
|
30-Apr-1998 |
deraadt |
Wall
|
Revision tags: OPENBSD_2_3_BASE
|
#
1.7 |
|
15-Nov-1997 |
todd |
spelling
|
Revision tags: OPENBSD_2_2_BASE
|
#
1.6 |
|
25-Aug-1997 |
deraadt |
clear input buffer to ' ' or \0 correctly; jlemon@freebsd
|
Revision tags: OPENBSD_2_1_BASE
|
#
1.5 |
|
14-Feb-1997 |
millert |
Deal with 64-bit offsets and report bytes copied as a 64-bit quantity. Closes OpenBSD PR system/107.
|
#
1.4 |
|
14-Dec-1996 |
mickey |
-Wall'ing.
|
Revision tags: OPENBSD_2_0_BASE
|
#
1.3 |
|
23-Jun-1996 |
deraadt |
update rcsid
|
#
1.2 |
|
03-Mar-1996 |
niklas |
From NetBSD: Use const qualifier with conversion, args and clist tables
|
#
1.1 |
|
18-Oct-1995 |
deraadt |
branches: 1.1.1; Initial revision
|
#
1.27 |
|
28-Jun-2019 |
deraadt |
When system calls indicate an error they return -1, not some arbitrary value < 0. errno is only updated in this case. Change all (most?) callers of syscalls to follow this better, and let's see if this strictness helps us in the future.
|
Revision tags: OPENBSD_6_5_BASE
|
#
1.26 |
|
16-Feb-2019 |
bluhm |
Implement the conv=fsync feature which does an fsync(2) after the final write to output. GNU dd also has this. It is useful for write performance measurement or guaranteed writes to reliable storage. OK kn@ tedu@ deraadt@
|
Revision tags: OPENBSD_6_4_BASE
|
#
1.25 |
|
23-Jul-2018 |
cheloha |
Don't cast malloc(3) size to u_int.
Large buffer sizes on 64-bit platforms cause the sum to wrap, leading read(2) to fail later.
We check prior to this point that all buffer sizes are <= SSIZE_MAX. SSIZE_MAX * 2 < SIZE_MAX on all platforms, so the addition here will not overflow and cause a similar issue.
Discovered by tobias@ a while back.
ok deraadt millert tobias
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE
|
#
1.24 |
|
13-Aug-2017 |
tedu |
convert gettimeofday to mono clock. from Scott Cheloha
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE OPENBSD_6_1_BASE
|
#
1.23 |
|
09-Oct-2015 |
deraadt |
Change all tame callers to namechange to pledge(2).
|
#
1.22 |
|
04-Oct-2015 |
deraadt |
after dd has opened it's files and done the tape positioning ioctl, we can tame "stdio" it. ok semarie
|
Revision tags: OPENBSD_5_7_BASE OPENBSD_5_8_BASE
|
#
1.21 |
|
16-Jan-2015 |
deraadt |
Replace <sys/param.h> with <limits.h> and other less dirty headers where possible. Annotate <sys/param.h> lines with their current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1, LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution. These are the files confirmed through binary verification. ok guenther, millert, doug (helped with the verification protocol)
|
#
1.20 |
|
05-Jan-2015 |
tedu |
use the correct read count when determining how swabbing is necessary. bug report from Martin Wolters
|
#
1.19 |
|
11-Dec-2014 |
tedu |
use a local swapbytes function instead of relying on undefined overlapping swab behavior. vaguely ok kettenis
|
Revision tags: OPENBSD_5_4_BASE OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.18 |
|
01-Jun-2013 |
tedu |
consolidate ifdef blocks by moving a variable
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.17 |
|
12-Jul-2012 |
millert |
Use S_ISFIFO and S_ISSOCK instead of lseek() to determine whether an fd is a socket, pipe or named pipe. OK deraadt@ matthew@
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE OPENBSD_4_9_BASE OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.16 |
|
27-Oct-2009 |
deraadt |
rcsid[] and sccsid[] and copyright[] are essentially unmaintained (and unmaintainable). these days, people use source. these id's do not provide any benefit, and do hurt the small install media (the 33,000 line diff is essentially mechanical) ok with the idea millert, ok dms
|
Revision tags: OPENBSD_4_3_BASE OPENBSD_4_4_BASE OPENBSD_4_5_BASE OPENBSD_4_6_BASE
|
#
1.15 |
|
10-Nov-2007 |
chl |
remove "unused variable" warning appearing when building release
ok millert@
|
Revision tags: OPENBSD_3_4_BASE OPENBSD_3_5_BASE OPENBSD_3_6_BASE OPENBSD_3_7_BASE OPENBSD_3_8_BASE OPENBSD_3_9_BASE OPENBSD_4_0_BASE OPENBSD_4_1_BASE OPENBSD_4_2_BASE
|
#
1.14 |
|
11-Jun-2003 |
deraadt |
ansification, art ok
|
#
1.13 |
|
02-Jun-2003 |
millert |
Remove the advertising clause in the UCB license which Berkeley rescinded 22 July 1999. Proofed by myself and Theo.
|
Revision tags: OPENBSD_3_1_BASE OPENBSD_3_2_BASE OPENBSD_3_3_BASE
|
#
1.12 |
|
16-Feb-2002 |
millert |
Part one of userland __P removal. Done with a simple regexp with some minor hand editing to make comments line up correctly. Another pass is forthcoming that handles the cases that could not be done automatically.
|
Revision tags: OPENBSD_3_0_BASE
|
#
1.11 |
|
06-Oct-2001 |
millert |
Fix ``echo foo |dd'' which was broken by the last commit.
|
#
1.10 |
|
04-Oct-2001 |
millert |
Move check for count=0 into dd's main. We want to do normal setup in this case and just don't want to actually copy any data. Fixes a problem noted by aaron@ where the time portion of the summary would be wrong and also gives us sane behavior when seek is non-zero but count is 0.
|
#
1.9 |
|
07-Aug-2001 |
hugh |
Modify timekeeping in an effort to produce a sane bandwidth measure for a short running dd process. Some floating point is used so that microsecond precision can be kept without shortening the off_t excessively. millert says ok.
|
Revision tags: OPENBSD_2_4_BASE OPENBSD_2_5_BASE OPENBSD_2_6_BASE OPENBSD_2_7_BASE OPENBSD_2_8_BASE OPENBSD_2_9_BASE
|
#
1.8 |
|
30-Apr-1998 |
deraadt |
Wall
|
Revision tags: OPENBSD_2_3_BASE
|
#
1.7 |
|
15-Nov-1997 |
todd |
spelling
|
Revision tags: OPENBSD_2_2_BASE
|
#
1.6 |
|
25-Aug-1997 |
deraadt |
clear input buffer to ' ' or \0 correctly; jlemon@freebsd
|
Revision tags: OPENBSD_2_1_BASE
|
#
1.5 |
|
14-Feb-1997 |
millert |
Deal with 64-bit offsets and report bytes copied as a 64-bit quantity. Closes OpenBSD PR system/107.
|
#
1.4 |
|
14-Dec-1996 |
mickey |
-Wall'ing.
|
Revision tags: OPENBSD_2_0_BASE
|
#
1.3 |
|
23-Jun-1996 |
deraadt |
update rcsid
|
#
1.2 |
|
03-Mar-1996 |
niklas |
From NetBSD: Use const qualifier with conversion, args and clist tables
|
#
1.1 |
|
18-Oct-1995 |
deraadt |
branches: 1.1.1; Initial revision
|
#
1.26 |
|
16-Feb-2019 |
bluhm |
Implement the conv=fsync feature which does an fsync(2) after the final write to output. GNU dd also has this. It is useful for write performance measurement or guaranteed writes to reliable storage. OK kn@ tedu@ deraadt@
|
Revision tags: OPENBSD_6_4_BASE
|
#
1.25 |
|
23-Jul-2018 |
cheloha |
Don't cast malloc(3) size to u_int.
Large buffer sizes on 64-bit platforms cause the sum to wrap, leading read(2) to fail later.
We check prior to this point that all buffer sizes are <= SSIZE_MAX. SSIZE_MAX * 2 < SIZE_MAX on all platforms, so the addition here will not overflow and cause a similar issue.
Discovered by tobias@ a while back.
ok deraadt millert tobias
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE
|
#
1.24 |
|
13-Aug-2017 |
tedu |
convert gettimeofday to mono clock. from Scott Cheloha
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE OPENBSD_6_1_BASE
|
#
1.23 |
|
09-Oct-2015 |
deraadt |
Change all tame callers to namechange to pledge(2).
|
#
1.22 |
|
04-Oct-2015 |
deraadt |
after dd has opened it's files and done the tape positioning ioctl, we can tame "stdio" it. ok semarie
|
Revision tags: OPENBSD_5_7_BASE OPENBSD_5_8_BASE
|
#
1.21 |
|
16-Jan-2015 |
deraadt |
Replace <sys/param.h> with <limits.h> and other less dirty headers where possible. Annotate <sys/param.h> lines with their current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1, LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution. These are the files confirmed through binary verification. ok guenther, millert, doug (helped with the verification protocol)
|
#
1.20 |
|
05-Jan-2015 |
tedu |
use the correct read count when determining how swabbing is necessary. bug report from Martin Wolters
|
#
1.19 |
|
11-Dec-2014 |
tedu |
use a local swapbytes function instead of relying on undefined overlapping swab behavior. vaguely ok kettenis
|
Revision tags: OPENBSD_5_4_BASE OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.18 |
|
01-Jun-2013 |
tedu |
consolidate ifdef blocks by moving a variable
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.17 |
|
12-Jul-2012 |
millert |
Use S_ISFIFO and S_ISSOCK instead of lseek() to determine whether an fd is a socket, pipe or named pipe. OK deraadt@ matthew@
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE OPENBSD_4_9_BASE OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.16 |
|
27-Oct-2009 |
deraadt |
rcsid[] and sccsid[] and copyright[] are essentially unmaintained (and unmaintainable). these days, people use source. these id's do not provide any benefit, and do hurt the small install media (the 33,000 line diff is essentially mechanical) ok with the idea millert, ok dms
|
Revision tags: OPENBSD_4_3_BASE OPENBSD_4_4_BASE OPENBSD_4_5_BASE OPENBSD_4_6_BASE
|
#
1.15 |
|
10-Nov-2007 |
chl |
remove "unused variable" warning appearing when building release
ok millert@
|
Revision tags: OPENBSD_3_4_BASE OPENBSD_3_5_BASE OPENBSD_3_6_BASE OPENBSD_3_7_BASE OPENBSD_3_8_BASE OPENBSD_3_9_BASE OPENBSD_4_0_BASE OPENBSD_4_1_BASE OPENBSD_4_2_BASE
|
#
1.14 |
|
11-Jun-2003 |
deraadt |
ansification, art ok
|
#
1.13 |
|
02-Jun-2003 |
millert |
Remove the advertising clause in the UCB license which Berkeley rescinded 22 July 1999. Proofed by myself and Theo.
|
Revision tags: OPENBSD_3_1_BASE OPENBSD_3_2_BASE OPENBSD_3_3_BASE
|
#
1.12 |
|
16-Feb-2002 |
millert |
Part one of userland __P removal. Done with a simple regexp with some minor hand editing to make comments line up correctly. Another pass is forthcoming that handles the cases that could not be done automatically.
|
Revision tags: OPENBSD_3_0_BASE
|
#
1.11 |
|
06-Oct-2001 |
millert |
Fix ``echo foo |dd'' which was broken by the last commit.
|
#
1.10 |
|
04-Oct-2001 |
millert |
Move check for count=0 into dd's main. We want to do normal setup in this case and just don't want to actually copy any data. Fixes a problem noted by aaron@ where the time portion of the summary would be wrong and also gives us sane behavior when seek is non-zero but count is 0.
|
#
1.9 |
|
07-Aug-2001 |
hugh |
Modify timekeeping in an effort to produce a sane bandwidth measure for a short running dd process. Some floating point is used so that microsecond precision can be kept without shortening the off_t excessively. millert says ok.
|
Revision tags: OPENBSD_2_4_BASE OPENBSD_2_5_BASE OPENBSD_2_6_BASE OPENBSD_2_7_BASE OPENBSD_2_8_BASE OPENBSD_2_9_BASE
|
#
1.8 |
|
30-Apr-1998 |
deraadt |
Wall
|
Revision tags: OPENBSD_2_3_BASE
|
#
1.7 |
|
15-Nov-1997 |
todd |
spelling
|
Revision tags: OPENBSD_2_2_BASE
|
#
1.6 |
|
25-Aug-1997 |
deraadt |
clear input buffer to ' ' or \0 correctly; jlemon@freebsd
|
Revision tags: OPENBSD_2_1_BASE
|
#
1.5 |
|
14-Feb-1997 |
millert |
Deal with 64-bit offsets and report bytes copied as a 64-bit quantity. Closes OpenBSD PR system/107.
|
#
1.4 |
|
14-Dec-1996 |
mickey |
-Wall'ing.
|
Revision tags: OPENBSD_2_0_BASE
|
#
1.3 |
|
23-Jun-1996 |
deraadt |
update rcsid
|
#
1.2 |
|
03-Mar-1996 |
niklas |
From NetBSD: Use const qualifier with conversion, args and clist tables
|
#
1.1 |
|
18-Oct-1995 |
deraadt |
branches: 1.1.1; Initial revision
|
#
1.25 |
|
23-Jul-2018 |
cheloha |
Don't cast malloc(3) size to u_int.
Large buffer sizes on 64-bit platforms cause the sum to wrap, leading read(2) to fail later.
We check prior to this point that all buffer sizes are <= SSIZE_MAX. SSIZE_MAX * 2 < SIZE_MAX on all platforms, so the addition here will not overflow and cause a similar issue.
Discovered by tobias@ a while back.
ok deraadt millert tobias
|
Revision tags: OPENBSD_6_2_BASE OPENBSD_6_3_BASE
|
#
1.24 |
|
13-Aug-2017 |
tedu |
convert gettimeofday to mono clock. from Scott Cheloha
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE OPENBSD_6_1_BASE
|
#
1.23 |
|
09-Oct-2015 |
deraadt |
Change all tame callers to namechange to pledge(2).
|
#
1.22 |
|
04-Oct-2015 |
deraadt |
after dd has opened it's files and done the tape positioning ioctl, we can tame "stdio" it. ok semarie
|
Revision tags: OPENBSD_5_7_BASE OPENBSD_5_8_BASE
|
#
1.21 |
|
16-Jan-2015 |
deraadt |
Replace <sys/param.h> with <limits.h> and other less dirty headers where possible. Annotate <sys/param.h> lines with their current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1, LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution. These are the files confirmed through binary verification. ok guenther, millert, doug (helped with the verification protocol)
|
#
1.20 |
|
05-Jan-2015 |
tedu |
use the correct read count when determining how swabbing is necessary. bug report from Martin Wolters
|
#
1.19 |
|
11-Dec-2014 |
tedu |
use a local swapbytes function instead of relying on undefined overlapping swab behavior. vaguely ok kettenis
|
Revision tags: OPENBSD_5_4_BASE OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.18 |
|
01-Jun-2013 |
tedu |
consolidate ifdef blocks by moving a variable
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.17 |
|
12-Jul-2012 |
millert |
Use S_ISFIFO and S_ISSOCK instead of lseek() to determine whether an fd is a socket, pipe or named pipe. OK deraadt@ matthew@
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE OPENBSD_4_9_BASE OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.16 |
|
27-Oct-2009 |
deraadt |
rcsid[] and sccsid[] and copyright[] are essentially unmaintained (and unmaintainable). these days, people use source. these id's do not provide any benefit, and do hurt the small install media (the 33,000 line diff is essentially mechanical) ok with the idea millert, ok dms
|
Revision tags: OPENBSD_4_3_BASE OPENBSD_4_4_BASE OPENBSD_4_5_BASE OPENBSD_4_6_BASE
|
#
1.15 |
|
10-Nov-2007 |
chl |
remove "unused variable" warning appearing when building release
ok millert@
|
Revision tags: OPENBSD_3_4_BASE OPENBSD_3_5_BASE OPENBSD_3_6_BASE OPENBSD_3_7_BASE OPENBSD_3_8_BASE OPENBSD_3_9_BASE OPENBSD_4_0_BASE OPENBSD_4_1_BASE OPENBSD_4_2_BASE
|
#
1.14 |
|
11-Jun-2003 |
deraadt |
ansification, art ok
|
#
1.13 |
|
02-Jun-2003 |
millert |
Remove the advertising clause in the UCB license which Berkeley rescinded 22 July 1999. Proofed by myself and Theo.
|
Revision tags: OPENBSD_3_1_BASE OPENBSD_3_2_BASE OPENBSD_3_3_BASE
|
#
1.12 |
|
16-Feb-2002 |
millert |
Part one of userland __P removal. Done with a simple regexp with some minor hand editing to make comments line up correctly. Another pass is forthcoming that handles the cases that could not be done automatically.
|
Revision tags: OPENBSD_3_0_BASE
|
#
1.11 |
|
06-Oct-2001 |
millert |
Fix ``echo foo |dd'' which was broken by the last commit.
|
#
1.10 |
|
04-Oct-2001 |
millert |
Move check for count=0 into dd's main. We want to do normal setup in this case and just don't want to actually copy any data. Fixes a problem noted by aaron@ where the time portion of the summary would be wrong and also gives us sane behavior when seek is non-zero but count is 0.
|
#
1.9 |
|
07-Aug-2001 |
hugh |
Modify timekeeping in an effort to produce a sane bandwidth measure for a short running dd process. Some floating point is used so that microsecond precision can be kept without shortening the off_t excessively. millert says ok.
|
Revision tags: OPENBSD_2_4_BASE OPENBSD_2_5_BASE OPENBSD_2_6_BASE OPENBSD_2_7_BASE OPENBSD_2_8_BASE OPENBSD_2_9_BASE
|
#
1.8 |
|
30-Apr-1998 |
deraadt |
Wall
|
Revision tags: OPENBSD_2_3_BASE
|
#
1.7 |
|
15-Nov-1997 |
todd |
spelling
|
Revision tags: OPENBSD_2_2_BASE
|
#
1.6 |
|
25-Aug-1997 |
deraadt |
clear input buffer to ' ' or \0 correctly; jlemon@freebsd
|
Revision tags: OPENBSD_2_1_BASE
|
#
1.5 |
|
14-Feb-1997 |
millert |
Deal with 64-bit offsets and report bytes copied as a 64-bit quantity. Closes OpenBSD PR system/107.
|
#
1.4 |
|
14-Dec-1996 |
mickey |
-Wall'ing.
|
Revision tags: OPENBSD_2_0_BASE
|
#
1.3 |
|
23-Jun-1996 |
deraadt |
update rcsid
|
#
1.2 |
|
03-Mar-1996 |
niklas |
From NetBSD: Use const qualifier with conversion, args and clist tables
|
#
1.1 |
|
18-Oct-1995 |
deraadt |
branches: 1.1.1; Initial revision
|
Revision tags: OPENBSD_6_2_BASE
|
#
1.24 |
|
13-Aug-2017 |
tedu |
convert gettimeofday to mono clock. from Scott Cheloha
|
Revision tags: OPENBSD_5_9_BASE OPENBSD_6_0_BASE OPENBSD_6_1_BASE
|
#
1.23 |
|
09-Oct-2015 |
deraadt |
Change all tame callers to namechange to pledge(2).
|
#
1.22 |
|
04-Oct-2015 |
deraadt |
after dd has opened it's files and done the tape positioning ioctl, we can tame "stdio" it. ok semarie
|
Revision tags: OPENBSD_5_7_BASE OPENBSD_5_8_BASE
|
#
1.21 |
|
16-Jan-2015 |
deraadt |
Replace <sys/param.h> with <limits.h> and other less dirty headers where possible. Annotate <sys/param.h> lines with their current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1, LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution. These are the files confirmed through binary verification. ok guenther, millert, doug (helped with the verification protocol)
|
#
1.20 |
|
05-Jan-2015 |
tedu |
use the correct read count when determining how swabbing is necessary. bug report from Martin Wolters
|
#
1.19 |
|
11-Dec-2014 |
tedu |
use a local swapbytes function instead of relying on undefined overlapping swab behavior. vaguely ok kettenis
|
Revision tags: OPENBSD_5_4_BASE OPENBSD_5_5_BASE OPENBSD_5_6_BASE
|
#
1.18 |
|
01-Jun-2013 |
tedu |
consolidate ifdef blocks by moving a variable
|
Revision tags: OPENBSD_5_2_BASE OPENBSD_5_3_BASE
|
#
1.17 |
|
12-Jul-2012 |
millert |
Use S_ISFIFO and S_ISSOCK instead of lseek() to determine whether an fd is a socket, pipe or named pipe. OK deraadt@ matthew@
|
Revision tags: OPENBSD_4_7_BASE OPENBSD_4_8_BASE OPENBSD_4_9_BASE OPENBSD_5_0_BASE OPENBSD_5_1_BASE
|
#
1.16 |
|
27-Oct-2009 |
deraadt |
rcsid[] and sccsid[] and copyright[] are essentially unmaintained (and unmaintainable). these days, people use source. these id's do not provide any benefit, and do hurt the small install media (the 33,000 line diff is essentially mechanical) ok with the idea millert, ok dms
|
Revision tags: OPENBSD_4_3_BASE OPENBSD_4_4_BASE OPENBSD_4_5_BASE OPENBSD_4_6_BASE
|
#
1.15 |
|
10-Nov-2007 |
chl |
remove "unused variable" warning appearing when building release
ok millert@
|
Revision tags: OPENBSD_3_4_BASE OPENBSD_3_5_BASE OPENBSD_3_6_BASE OPENBSD_3_7_BASE OPENBSD_3_8_BASE OPENBSD_3_9_BASE OPENBSD_4_0_BASE OPENBSD_4_1_BASE OPENBSD_4_2_BASE
|
#
1.14 |
|
11-Jun-2003 |
deraadt |
ansification, art ok
|
#
1.13 |
|
02-Jun-2003 |
millert |
Remove the advertising clause in the UCB license which Berkeley rescinded 22 July 1999. Proofed by myself and Theo.
|
Revision tags: OPENBSD_3_1_BASE OPENBSD_3_2_BASE OPENBSD_3_3_BASE
|
#
1.12 |
|
16-Feb-2002 |
millert |
Part one of userland __P removal. Done with a simple regexp with some minor hand editing to make comments line up correctly. Another pass is forthcoming that handles the cases that could not be done automatically.
|
Revision tags: OPENBSD_3_0_BASE
|
#
1.11 |
|
06-Oct-2001 |
millert |
Fix ``echo foo |dd'' which was broken by the last commit.
|
#
1.10 |
|
04-Oct-2001 |
millert |
Move check for count=0 into dd's main. We want to do normal setup in this case and just don't want to actually copy any data. Fixes a problem noted by aaron@ where the time portion of the summary would be wrong and also gives us sane behavior when seek is non-zero but count is 0.
|
#
1.9 |
|
07-Aug-2001 |
hugh |
Modify timekeeping in an effort to produce a sane bandwidth measure for a short running dd process. Some floating point is used so that microsecond precision can be kept without shortening the off_t excessively. millert says ok.
|
Revision tags: OPENBSD_2_4_BASE OPENBSD_2_5_BASE OPENBSD_2_6_BASE OPENBSD_2_7_BASE OPENBSD_2_8_BASE OPENBSD_2_9_BASE
|
#
1.8 |
|
30-Apr-1998 |
deraadt |
Wall
|
Revision tags: OPENBSD_2_3_BASE
|
#
1.7 |
|
15-Nov-1997 |
todd |
spelling
|
Revision tags: OPENBSD_2_2_BASE
|
#
1.6 |
|
25-Aug-1997 |
deraadt |
clear input buffer to ' ' or \0 correctly; jlemon@freebsd
|
Revision tags: OPENBSD_2_1_BASE
|
#
1.5 |
|
14-Feb-1997 |
millert |
Deal with 64-bit offsets and report bytes copied as a 64-bit quantity. Closes OpenBSD PR system/107.
|
#
1.4 |
|
14-Dec-1996 |
mickey |
-Wall'ing.
|
Revision tags: OPENBSD_2_0_BASE
|
#
1.3 |
|
23-Jun-1996 |
deraadt |
update rcsid
|
#
1.2 |
|
03-Mar-1996 |
niklas |
From NetBSD: Use const qualifier with conversion, args and clist tables
|
#
1.1 |
|
18-Oct-1995 |
deraadt |
branches: 1.1.1; Initial revision
|