| #
1.5 |
|
07-Feb-2023 |
mlelstv |
- Reconfigure port speed only when initial speed was different.
- Time out HCI commands instead of hanging forever.
- When bcm43xx reset fails, assume that firmware is already
running and start line discipline.
This allows to re-attach bcm43xx without reboot.
|
|
Revision tags: netbsd-10-base netbsd-9-3-RELEASE cjep_sun2x-base1 cjep_sun2x-base cjep_staticlib_x-base1 netbsd-9-2-RELEASE cjep_staticlib_x-base netbsd-9-1-RELEASE phil-wifi-20200421 phil-wifi-20200411 is-mlppp-base phil-wifi-20200406 netbsd-9-0-RELEASE netbsd-9-0-RC2 netbsd-9-0-RC1 phil-wifi-20191119 netbsd-9-base phil-wifi-20190609 pgoyette-compat-merge-20190127 pgoyette-compat-20190127 pgoyette-compat-20190118 pgoyette-compat-1226 pgoyette-compat-1126 pgoyette-compat-1020 pgoyette-compat-0930 pgoyette-compat-0906 pgoyette-compat-0728 phil-wifi-base pgoyette-compat-0625 pgoyette-compat-0521 pgoyette-compat-0502 pgoyette-compat-0422 pgoyette-compat-0415 pgoyette-compat-0407 pgoyette-compat-0330 pgoyette-compat-0322 pgoyette-compat-0315 pgoyette-compat-base
|
|
| #
1.4 |
|
10-Aug-2017 |
nat |
Add support for bcm 43xx devices using the btuart h5 protocol.
Currently It will only load 1 firmware image for rpi3.
To use change to the directory containing the firmware BCM4340A1.hcd.
Then issue: btattach -FPi 115200 bcm43xx /dev/ttydevice 921600.
Then you can use the bluetooth device btfive0.
This enables the embedded bluetooth controller on rpi3.
|
|
Revision tags: netbsd-8-2-RELEASE netbsd-8-1-RELEASE netbsd-8-1-RC1 netbsd-7-2-RELEASE netbsd-8-0-RELEASE netbsd-8-0-RC2 netbsd-8-0-RC1 netbsd-7-1-2-RELEASE netbsd-7-1-1-RELEASE matt-nb8-mediatek-base perseant-stdc-iso10646-base netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320 netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 bouyer-socketcan-base pgoyette-localcount-20170107 netbsd-7-1-RC1 pgoyette-localcount-20161104 netbsd-7-0-2-RELEASE localcount-20160914 netbsd-7-nhusb-base pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE netbsd-7-base yamt-pagecache-base9 yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 tls-maxphys-base matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231 matt-premerge-20091211
|
|
| #
1.3 |
|
06-Dec-2009 |
kiyohara |
Support Infineon UniStone (PBA31308).
from Gumstix's bluez-utils-hciattach-pba31308.patch.
tested on Gumstix verdex-pro.
|
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
|
| #
1.2 |
|
15-Apr-2009 |
lukem |
Fix -Wsign-compare issues.
(Use %u not %d for unsigned ints.)
|
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base
|
|
| #
1.1 |
|
15-Apr-2008 |
plunky |
branches: 1.1.10;
some changes to serial bluetooth host controller interfaces
btuartd(8) should be named btattach(8) for consistency
with other parts of NetBSD
make btattach(8) a single-use tool for less complexity
device specicific initialisation (from btuart(4)) is carried
out prior to activating the line discipline (in btattach(8)),
which simplifies the API somewhat and means that the user
tool and the kernel do not need to be kept in sync.
btuart(4) driver is much reduced; naming is made consistent
and all tsleep() and delay() are removed to userland
|
| #
1.4 |
|
10-Aug-2017 |
nat |
Add support for bcm 43xx devices using the btuart h5 protocol.
Currently It will only load 1 firmware image for rpi3.
To use change to the directory containing the firmware BCM4340A1.hcd.
Then issue: btattach -FPi 115200 bcm43xx /dev/ttydevice 921600.
Then you can use the bluetooth device btfive0.
This enables the embedded bluetooth controller on rpi3.
|
|
Revision tags: perseant-stdc-iso10646-base netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 pgoyette-localcount-20170320 netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 bouyer-socketcan-base pgoyette-localcount-20170107 netbsd-7-1-RC1 pgoyette-localcount-20161104 netbsd-7-0-2-RELEASE localcount-20160914 netbsd-7-nhusb-base pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base netbsd-7-0-1-RELEASE netbsd-7-0-RELEASE netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 netbsd-6-0-6-RELEASE netbsd-6-1-5-RELEASE netbsd-7-base yamt-pagecache-base9 yamt-pagecache-tag8 netbsd-6-1-4-RELEASE netbsd-6-0-5-RELEASE tls-earlyentropy-base riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3 netbsd-6-1-3-RELEASE netbsd-6-0-4-RELEASE netbsd-6-1-2-RELEASE netbsd-6-0-3-RELEASE netbsd-6-1-1-RELEASE riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base netbsd-6-0-2-RELEASE netbsd-6-1-RELEASE netbsd-6-1-RC4 netbsd-6-1-RC3 agc-symver-base netbsd-6-1-RC2 netbsd-6-1-RC1 yamt-pagecache-base8 netbsd-6-0-1-RELEASE yamt-pagecache-base7 matt-nb6-plus-nbase yamt-pagecache-base6 netbsd-6-0-RELEASE netbsd-6-0-RC2 tls-maxphys-base matt-nb6-plus-base netbsd-6-0-RC1 yamt-pagecache-base5 yamt-pagecache-base4 netbsd-6-base yamt-pagecache-base3 yamt-pagecache-base2 yamt-pagecache-base cherry-xenmp-base bouyer-quota2-nbase bouyer-quota2-base matt-mips64-premerge-20101231 matt-premerge-20091211
|
|
| #
1.3 |
|
06-Dec-2009 |
kiyohara |
Support Infineon UniStone (PBA31308).
from Gumstix's bluez-utils-hciattach-pba31308.patch.
tested on Gumstix verdex-pro.
|
|
Revision tags: jym-xensuspend-nbase jym-xensuspend-base
|
|
| #
1.2 |
|
15-Apr-2009 |
lukem |
Fix -Wsign-compare issues.
(Use %u not %d for unsigned ints.)
|
|
Revision tags: netbsd-5-2-3-RELEASE netbsd-5-1-5-RELEASE netbsd-5-2-2-RELEASE netbsd-5-1-4-RELEASE netbsd-5-2-1-RELEASE netbsd-5-1-3-RELEASE netbsd-5-2-RELEASE netbsd-5-2-RC1 netbsd-5-1-2-RELEASE netbsd-5-1-1-RELEASE matt-nb5-mips64-premerge-20101231 matt-nb5-pq3-base netbsd-5-1-RELEASE netbsd-5-1-RC4 matt-nb5-mips64-k15 netbsd-5-1-RC3 netbsd-5-1-RC2 netbsd-5-1-RC1 netbsd-5-0-2-RELEASE matt-nb5-mips64-premerge-20091211 matt-nb5-mips64-u2-k2-k4-k7-k8-k9 matt-nb4-mips64-k7-u2a-k9b matt-nb5-mips64-u1-k1-k5 netbsd-5-0-1-RELEASE netbsd-5-0-RELEASE netbsd-5-0-RC4 netbsd-5-0-RC3 netbsd-5-0-RC2 netbsd-5-0-RC1 netbsd-5-base matt-mips64-base2 wrstuden-revivesa-base-3 wrstuden-revivesa-base-2 wrstuden-revivesa-base-1 yamt-pf42-base4 yamt-pf42-base3 hpcarm-cleanup-nbase yamt-pf42-baseX yamt-pf42-base2 wrstuden-revivesa-base yamt-pf42-base
|
|
| #
1.1 |
|
15-Apr-2008 |
plunky |
branches: 1.1.10;
some changes to serial bluetooth host controller interfaces
btuartd(8) should be named btattach(8) for consistency
with other parts of NetBSD
make btattach(8) a single-use tool for less complexity
device specicific initialisation (from btuart(4)) is carried
out prior to activating the line discipline (in btattach(8)),
which simplifies the API somewhat and means that the user
tool and the kernel do not need to be kept in sync.
btuart(4) driver is much reduced; naming is made consistent
and all tsleep() and delay() are removed to userland
|