rump_allserver: trim down the list of libraries

Now that cyclic dependencies are (mostly) broken, we can drop repeated
-l instances that worked around those cycles. Links on sun2.

Force at most partial RELRO for rump_server and related libraries

rump_server with -l uses lazy resolution by default and thus cannot be
used with full RELRO/BIND_NOW.

Allow to set sanitizer flags for the rump build from the
build.sh command line, like: -V RUMP_SANITIZE=address

fix sun2 build

Fix sun2

branches: 1.11.10;
With the removal of HAVE_REGISTER_T from rumpuser_port.h, _KERNTYPES does not
need to be defined. This allows register_t to be typedef'd to RUMP_REGISTER_T
without conflict, as highlighted in PR kern/52206.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

branches: 1.8.6;
Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

Force at most partial RELRO for rump_server and related libraries

rump_server with -l uses lazy resolution by default and thus cannot be
used with full RELRO/BIND_NOW.

Allow to set sanitizer flags for the rump build from the
build.sh command line, like: -V RUMP_SANITIZE=address

fix sun2 build

Fix sun2

branches: 1.11.10;
With the removal of HAVE_REGISTER_T from rumpuser_port.h, _KERNTYPES does not
need to be defined. This allows register_t to be typedef'd to RUMP_REGISTER_T
without conflict, as highlighted in PR kern/52206.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

branches: 1.8.6;
Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

Allow to set sanitizer flags for the rump build from the
build.sh command line, like: -V RUMP_SANITIZE=address

fix sun2 build

Fix sun2

branches: 1.11.10;
With the removal of HAVE_REGISTER_T from rumpuser_port.h, _KERNTYPES does not
need to be defined. This allows register_t to be typedef'd to RUMP_REGISTER_T
without conflict, as highlighted in PR kern/52206.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

branches: 1.8.6;
Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

fix sun2 build

Fix sun2

branches: 1.11.10;
With the removal of HAVE_REGISTER_T from rumpuser_port.h, _KERNTYPES does not
need to be defined. This allows register_t to be typedef'd to RUMP_REGISTER_T
without conflict, as highlighted in PR kern/52206.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

branches: 1.8.6;
Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

Fix sun2

With the removal of HAVE_REGISTER_T from rumpuser_port.h, _KERNTYPES does not
need to be defined. This allows register_t to be typedef'd to RUMP_REGISTER_T
without conflict, as highlighted in PR kern/52206.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

branches: 1.8.6;
Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

With the removal of HAVE_REGISTER_T from rumpuser_port.h, _KERNTYPES does not
need to be defined. This allows register_t to be typedef'd to RUMP_REGISTER_T
without conflict, as highlighted in PR kern/52206.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

branches: 1.8.6;
Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

Revert previous change so builds can resume.
_KERNTYPES needs to be defined for NetBSD builds to succeed.
_KERNTYPES must not be defined for buildrum.sh builds to succeed.

Do not define _KERNTYPES as this breaks build with buildrump.sh due to
conflicting types for register_t.
Closes PR kern/52206
Steered in the right direction by christos.

Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.

Define _KERNTYPES for things that need it.

Support disklabel partitions on all platforms.

also addresses buildrump.sh issue #41 (github)

Need bsd.own.mk for mk.conf, include it at an opportune place.

Make it possible to omit libutil from the link. It's used only for
disklabel stuff, and is only harmful on platforms that don't currently
provide user namespace disklabel interfaces.

branches: 1.4.4; 1.4.10;
Allow to specify -d hostpath offset,size with disklabel.

branches: 1.3.2;
manpage

rumpcrypto now comes as part of RUMPKERNLDADD

Add a rump server which comes with all the drivers currently
available. In terms of modules it maps to:

golem> rump.modstat
NAME CLASS SOURCE REFS SIZE REQUIRES
bpf driver builtin 0 - -
cd9660 vfs builtin 0 - -
cgd driver builtin 0 - -
dm driver builtin 0 - -
efs vfs builtin 0 - -
ext2fs vfs builtin 0 - ffs
fdesc vfs builtin 0 - -
ffs vfs builtin 3 - -
fss driver builtin 0 - -
hfs vfs builtin 0 - -
kernfs vfs builtin 0 - -
ksem misc builtin 0 - -
layerfs misc builtin 2 - -
lfs vfs builtin 0 - ffs
mfs vfs builtin 0 - ffs
msdos vfs builtin 0 - -
nfs vfs builtin 1 - -
nfsserver misc builtin 0 - nfs
nilfs vfs builtin 0 - -
ntfs vfs builtin 0 - -
null vfs builtin 0 - layerfs
pad driver builtin 0 - -
ptyfs vfs builtin 0 - -
puffs vfs builtin 0 - putter
putter driver builtin 1 - -
scsiverbose misc builtin 0 - -
smbfs vfs builtin 0 - -
suser secmodel builtin 0 - -
swsensor driver builtin 0 - -
sysvbfs vfs builtin 0 - -
tmpfs vfs builtin 0 - -
udf vfs builtin 0 - -
umap vfs builtin 0 - layerfs
union vfs builtin 0 - -
usbverbose misc builtin 0 - -
wapbl vfs builtin 0 - -


In terms of interfaces:
golem> rump.ifconfig -C
shmif virt lo carp


and dmesg:
NetBSD 5.99.41 (RUMP-ROAST) #0: Tue Nov 30 15:35:05 CET 2010
pooka@pain-rustique.localhost:/usr/allsrc/src/sys/rump/librump/rumpkern
total memory = unlimited (host limit)
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "rumpclk" frequency 100 Hz quality 0
cpu0 at thinair0: rump virtual cpu
cpu1 at thinair0: rump virtual cpu
root file system type: rumpfs
mainbus0 (root)
ugenhc0 at mainbus0
usb0 at ugenhc0: USB revision 2.0
uhub0 at usb0: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub0: 1 port with 1 removable, self powered
ugenhc1 at mainbus0
usb1 at ugenhc1: USB revision 2.0
uhub1 at usb1: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub1: 1 port with 1 removable, self powered
ugenhc2 at mainbus0
usb2 at ugenhc2: USB revision 2.0
uhub2 at usb2: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub2: 1 port with 1 removable, self powered
ugenhc3 at mainbus0
usb3 at ugenhc3: USB revision 2.0
uhub3 at usb3: vendor 0x7275 product 0x6d70, class 9/0, rev 0.00/0.00, addr 1
uhub3: 1 port with 1 removable, self powered
scsitest0 at mainbus0
scsibus0 at scsitest0: 2 targets, 1 lun per target
cd0 at scsibus0 target 1 lun 0: <RUMPHOBO, It's a LIE, 0.00> cdrom removable
Chicony Electronics Chicony Electronics, class 0/0, rev 2.00/1.00, addr 2, uhub0 port 1 not configured
AuthenTec AuthenTec, class 255/255, rev 1.10/6.21, addr 2, uhub1 port 1 not configured
swwdog0: software watchdog initialized
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture


There a bunch of other stuff which doesn't show up as any of the
above, plus of course the usb drivers which are probed only if I
have the appropriate hardware plugged into my workstation.