Revert CC_WNO_USE_AFTER_FREE from Makefile's (thanks uwe@)

Sprinkle CC_WNO_USE_AFTER_FREE for GCC 12

All of them are blamed for idiom equivalent to:
newbuf = realloc(buf, size);
p = newbuf + (p - buf);

bsd.own.mk: rename GCC_NO_* to CC_WNO_*

Rename compiler-warning-disable variables from
GCC_NO_warning
to
CC_WNO_warning
where warning is the full warning name as used by the compiler.

GCC_NO_IMPLICIT_FALLTHRU is CC_WNO_IMPLICIT_FALLTHROUGH

Using the convention CC_compilerflag, where compilerflag
is based on the full compiler flag name.

etc: Fix permissions of various editable configuration files.

This way they match the mtree and make sense and don't cause editors
to ask to override read-only files when editing them.

Exception: Not sure /etc/bluetooth/protocols makes as much sense to
edit, but the mtree says 644, so if you want to change it, make sure
to change it in both places -- Makefile and mtree.

XXX pullup-8
XXX pullup-9

fix sun2

introduce some common variables for use in GCC warning disables:

GCC_NO_FORMAT_TRUNCATION -Wno-format-truncation (GCC 7/8)
GCC_NO_STRINGOP_TRUNCATION -Wno-stringop-truncation (GCC 8)
GCC_NO_STRINGOP_OVERFLOW -Wno-stringop-overflow (GCC 8)
GCC_NO_CAST_FUNCTION_TYPE -Wno-cast-function-type (GCC 8)

use these to turn off warnings for most GCC-8 complaints. many
of these are false positives, most of the real bugs are already
commited, or are yet to come.


we plan to introduce versions of (some?) of these that use the
"-Wno-error=" form, which still displays the warnings but does
not make it an error, and all of the above will be re-considered
as either being "fix me" (warning still displayed) or "warning
is wrong."

branches: 1.38.2; 1.38.4;
use SUBDIR.roff suggested by uwe@

Remove Mail

branches: 1.36.16; 1.36.22;
Rework /usr/share/doc.

Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.

- Build and install text, ps, pdf, and/or html, not roff sources.

- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.

- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.

- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.

- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)

- Enumerate the .png files groff emits along with html so they can be
installed.

- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn

- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.

- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.

Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.

branches: 1.35.8; 1.35.18;
document non-literal format string

Userland now builds and uses terminfo instead of termcap.

OK: core@, jdc@

Enable WARNS=4 by default for usr.bin, except for:
awk bdes checknr compile_et error gss hxtool kgetcred kinit
klist ldd less lex locale login m4 man menuc mk_cmds
mklocale msgc openssl rpcgen rpcinfo sdiff spell ssh
string2key telnet tn3270 verify_krb5_conf xlint

- magic fix for short files
- knf
from Anon Ymous

From Anon Ymous:

- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.

- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.

- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.

- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.

- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.

- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.

- Lint cleanup.

- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.

- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".

- Document the "pager-off" variable: if set, it disables paging
entirely.

branches: 1.30.20;
Add new Makefile knob, USE_FORT, which extends USE_SSP by turning on the
FORTIFY_SOURCE feature of libssp, thus checking the size of arguments to
various string and memory copy and set functions (as well as a few system
calls and other miscellany) where known at function entry. RedHat has
evidently built all "core system packages" with this option for some time.

This option should be used at the top of Makefiles (or Makefile.inc where
this is used for subdirectories) but after any setting of LIB.

This is only useful for userland code, and cannot be used in libc or in
any code which includes the libc internals, because it overrides certain
libc functions with macros. Some effort has been made to make USE_FORT=yes
work correctly for a full-system build by having the bsd.sys.mk logic
disable the feature where it should not be used (libc, libssp iteself,
the kernel) but no attempt has been made to build the entire system with
USE_FORT and doing so will doubtless expose numerous bugs and misfeatures.

Adjust the system build so that all programs and libraries that are setuid,
directly handle network data (including serial comm data), perform
authentication, or appear likely to have (or have a history of having)
data-driven bugs (e.g. file(1)) are built with USE_FORT=yes by default,
with the exception of libc, which cannot use USE_FORT and thus uses
only USE_SSP by default. Tested on i386 with no ill results; USE_FORT=no
per-directory or in a system build will disable if desired.

From Anon Ymous:
1) Remove a stray "SRCS+=" line from the Makefile.
2) Document the "nospec" option of "regex-search".
3) Fix some typos and formatting in the manpage.

branches: 1.28.2;
From Anon Ymous:

1) Statification of modules.

2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.

3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.

4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).

5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)

6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.

7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).

8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).

9) Extend paging to all commands (where relevant).

10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.

11) The manpage should follow soon!!!!

More fixes from Anon Ymous:


1) Removed the -B flag (it was stupid on my part) and added a short
description indicating how to accomplish the same thing under the
"Sending Mail" section of man mail(1).

2) Added a -H flag to dump the headers and exit. It takes optional
flags to restrict to old, new, read, unread, and deleted messages
(the later being kind of useless - it shares code with something
that already had it).

3) Restored the 'Save' command which somehow got mistakenly removed in
the last commit and add documentation for it! (My apologies to
its author.)

4) Added a 'mkread' command to mark messages as read (the inverse of
'unread'). Should we also have a 'mknew' command?

5) Added a 'smopts' command to keep a database of addresses and
sendmail options to be used when sending messages to those
addresses. See man mail(1) for a fuller description.

6) Added 'indentpreamble' and 'indentpostscript' variables whose
values are inserted before and after a quoted message (~m or ~M
escapes).
=20
7) Added string formatting abilities for the 'prompt', 'insertpreamble',
'insertpostscript', and header display strings. These strings
support all the strftime() format parameters as well as many more
specific to mail (see man mail(1)).

8) Fix the -a flag so that it only takes a single filename, unless
"mime-attach-list" is defined. This is more conventional and avoids
unexpected whitespace issues.

Fix yes/no handling.

From our anonymous user:
- mime and character set handling
- command line editor and completion
- many code improvements

The recently added -ledit needs -ltermcap added as well.

Jumbo mail patch from our anonymous user:

1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).

2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.

3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.

4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.

5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.

6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:

mail -c "foo bar" christos

will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.

7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.

8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.

WARNS=3

Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.

XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.

WARNS=2.

use ${INSTALL_FILE} as appropriate

Rename "aux.c" to "support.c" to avoid clash with invalid "aux" basename
on some Microsoft host OS's.

Use ${COPY} instead of -c for ${INSTALL} commands.

Pass ${INSTPRIV} to ${INSTALL}.

branches: 1.15.10;
convert from NOxxx= to MKxxx=no.
include <bsd.own.mk> if testing a MKxxx variable.

don't install in /usr/share if NOSHARE is defined

Use bsd.subdir.mk as appropriate.

- Makefile cleanups

mail.rc now installed by 'make distribution' -- fixes pr-3015

Sync with 4.4BSD-Lite2

Use ${INSTALL}.

- Fix PR/105: Implement dot locking protocol and check return value of flock.
- Fix PR/2247: Don't call unknown users "ubluit". Issue an error message.
- Fix/add prototypes.
- Fix warnings.
- Use POSIX signal mask calls.
- RCSid police.

USE_OLD_TTY no longer needed

kill -R in CFLAGS

Install doc files.

branches: 1.4.2;
4.4-lite, plus our mods

Install mail as mailx too.
It's not quite POSIX compliant, but it only needs a few tweaks here and there.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

bsd.own.mk: rename GCC_NO_* to CC_WNO_*

Rename compiler-warning-disable variables from
GCC_NO_warning
to
CC_WNO_warning
where warning is the full warning name as used by the compiler.

GCC_NO_IMPLICIT_FALLTHRU is CC_WNO_IMPLICIT_FALLTHROUGH

Using the convention CC_compilerflag, where compilerflag
is based on the full compiler flag name.

etc: Fix permissions of various editable configuration files.

This way they match the mtree and make sense and don't cause editors
to ask to override read-only files when editing them.

Exception: Not sure /etc/bluetooth/protocols makes as much sense to
edit, but the mtree says 644, so if you want to change it, make sure
to change it in both places -- Makefile and mtree.

XXX pullup-8
XXX pullup-9

fix sun2

introduce some common variables for use in GCC warning disables:

GCC_NO_FORMAT_TRUNCATION -Wno-format-truncation (GCC 7/8)
GCC_NO_STRINGOP_TRUNCATION -Wno-stringop-truncation (GCC 8)
GCC_NO_STRINGOP_OVERFLOW -Wno-stringop-overflow (GCC 8)
GCC_NO_CAST_FUNCTION_TYPE -Wno-cast-function-type (GCC 8)

use these to turn off warnings for most GCC-8 complaints. many
of these are false positives, most of the real bugs are already
commited, or are yet to come.


we plan to introduce versions of (some?) of these that use the
"-Wno-error=" form, which still displays the warnings but does
not make it an error, and all of the above will be re-considered
as either being "fix me" (warning still displayed) or "warning
is wrong."

branches: 1.38.2; 1.38.4;
use SUBDIR.roff suggested by uwe@

Remove Mail

branches: 1.36.16; 1.36.22;
Rework /usr/share/doc.

Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.

- Build and install text, ps, pdf, and/or html, not roff sources.

- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.

- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.

- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.

- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)

- Enumerate the .png files groff emits along with html so they can be
installed.

- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn

- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.

- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.

Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.

branches: 1.35.8; 1.35.18;
document non-literal format string

Userland now builds and uses terminfo instead of termcap.

OK: core@, jdc@

Enable WARNS=4 by default for usr.bin, except for:
awk bdes checknr compile_et error gss hxtool kgetcred kinit
klist ldd less lex locale login m4 man menuc mk_cmds
mklocale msgc openssl rpcgen rpcinfo sdiff spell ssh
string2key telnet tn3270 verify_krb5_conf xlint

- magic fix for short files
- knf
from Anon Ymous

From Anon Ymous:

- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.

- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.

- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.

- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.

- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.

- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.

- Lint cleanup.

- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.

- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".

- Document the "pager-off" variable: if set, it disables paging
entirely.

branches: 1.30.20;
Add new Makefile knob, USE_FORT, which extends USE_SSP by turning on the
FORTIFY_SOURCE feature of libssp, thus checking the size of arguments to
various string and memory copy and set functions (as well as a few system
calls and other miscellany) where known at function entry. RedHat has
evidently built all "core system packages" with this option for some time.

This option should be used at the top of Makefiles (or Makefile.inc where
this is used for subdirectories) but after any setting of LIB.

This is only useful for userland code, and cannot be used in libc or in
any code which includes the libc internals, because it overrides certain
libc functions with macros. Some effort has been made to make USE_FORT=yes
work correctly for a full-system build by having the bsd.sys.mk logic
disable the feature where it should not be used (libc, libssp iteself,
the kernel) but no attempt has been made to build the entire system with
USE_FORT and doing so will doubtless expose numerous bugs and misfeatures.

Adjust the system build so that all programs and libraries that are setuid,
directly handle network data (including serial comm data), perform
authentication, or appear likely to have (or have a history of having)
data-driven bugs (e.g. file(1)) are built with USE_FORT=yes by default,
with the exception of libc, which cannot use USE_FORT and thus uses
only USE_SSP by default. Tested on i386 with no ill results; USE_FORT=no
per-directory or in a system build will disable if desired.

From Anon Ymous:
1) Remove a stray "SRCS+=" line from the Makefile.
2) Document the "nospec" option of "regex-search".
3) Fix some typos and formatting in the manpage.

branches: 1.28.2;
From Anon Ymous:

1) Statification of modules.

2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.

3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.

4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).

5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)

6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.

7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).

8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).

9) Extend paging to all commands (where relevant).

10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.

11) The manpage should follow soon!!!!

More fixes from Anon Ymous:


1) Removed the -B flag (it was stupid on my part) and added a short
description indicating how to accomplish the same thing under the
"Sending Mail" section of man mail(1).

2) Added a -H flag to dump the headers and exit. It takes optional
flags to restrict to old, new, read, unread, and deleted messages
(the later being kind of useless - it shares code with something
that already had it).

3) Restored the 'Save' command which somehow got mistakenly removed in
the last commit and add documentation for it! (My apologies to
its author.)

4) Added a 'mkread' command to mark messages as read (the inverse of
'unread'). Should we also have a 'mknew' command?

5) Added a 'smopts' command to keep a database of addresses and
sendmail options to be used when sending messages to those
addresses. See man mail(1) for a fuller description.

6) Added 'indentpreamble' and 'indentpostscript' variables whose
values are inserted before and after a quoted message (~m or ~M
escapes).
=20
7) Added string formatting abilities for the 'prompt', 'insertpreamble',
'insertpostscript', and header display strings. These strings
support all the strftime() format parameters as well as many more
specific to mail (see man mail(1)).

8) Fix the -a flag so that it only takes a single filename, unless
"mime-attach-list" is defined. This is more conventional and avoids
unexpected whitespace issues.

Fix yes/no handling.

From our anonymous user:
- mime and character set handling
- command line editor and completion
- many code improvements

The recently added -ledit needs -ltermcap added as well.

Jumbo mail patch from our anonymous user:

1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).

2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.

3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.

4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.

5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.

6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:

mail -c "foo bar" christos

will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.

7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.

8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.

WARNS=3

Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.

XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.

WARNS=2.

use ${INSTALL_FILE} as appropriate

Rename "aux.c" to "support.c" to avoid clash with invalid "aux" basename
on some Microsoft host OS's.

Use ${COPY} instead of -c for ${INSTALL} commands.

Pass ${INSTPRIV} to ${INSTALL}.

branches: 1.15.10;
convert from NOxxx= to MKxxx=no.
include <bsd.own.mk> if testing a MKxxx variable.

don't install in /usr/share if NOSHARE is defined

Use bsd.subdir.mk as appropriate.

- Makefile cleanups

mail.rc now installed by 'make distribution' -- fixes pr-3015

Sync with 4.4BSD-Lite2

Use ${INSTALL}.

- Fix PR/105: Implement dot locking protocol and check return value of flock.
- Fix PR/2247: Don't call unknown users "ubluit". Issue an error message.
- Fix/add prototypes.
- Fix warnings.
- Use POSIX signal mask calls.
- RCSid police.

USE_OLD_TTY no longer needed

kill -R in CFLAGS

Install doc files.

branches: 1.4.2;
4.4-lite, plus our mods

Install mail as mailx too.
It's not quite POSIX compliant, but it only needs a few tweaks here and there.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

etc: Fix permissions of various editable configuration files.

This way they match the mtree and make sense and don't cause editors
to ask to override read-only files when editing them.

Exception: Not sure /etc/bluetooth/protocols makes as much sense to
edit, but the mtree says 644, so if you want to change it, make sure
to change it in both places -- Makefile and mtree.

XXX pullup-8
XXX pullup-9

fix sun2

introduce some common variables for use in GCC warning disables:

GCC_NO_FORMAT_TRUNCATION -Wno-format-truncation (GCC 7/8)
GCC_NO_STRINGOP_TRUNCATION -Wno-stringop-truncation (GCC 8)
GCC_NO_STRINGOP_OVERFLOW -Wno-stringop-overflow (GCC 8)
GCC_NO_CAST_FUNCTION_TYPE -Wno-cast-function-type (GCC 8)

use these to turn off warnings for most GCC-8 complaints. many
of these are false positives, most of the real bugs are already
commited, or are yet to come.


we plan to introduce versions of (some?) of these that use the
"-Wno-error=" form, which still displays the warnings but does
not make it an error, and all of the above will be re-considered
as either being "fix me" (warning still displayed) or "warning
is wrong."

branches: 1.38.2;
use SUBDIR.roff suggested by uwe@

Remove Mail

branches: 1.36.22;
Rework /usr/share/doc.

Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.

- Build and install text, ps, pdf, and/or html, not roff sources.

- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.

- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.

- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.

- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)

- Enumerate the .png files groff emits along with html so they can be
installed.

- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn

- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.

- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.

Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.

branches: 1.35.8; 1.35.18;
document non-literal format string

Userland now builds and uses terminfo instead of termcap.

OK: core@, jdc@

Enable WARNS=4 by default for usr.bin, except for:
awk bdes checknr compile_et error gss hxtool kgetcred kinit
klist ldd less lex locale login m4 man menuc mk_cmds
mklocale msgc openssl rpcgen rpcinfo sdiff spell ssh
string2key telnet tn3270 verify_krb5_conf xlint

- magic fix for short files
- knf
from Anon Ymous

From Anon Ymous:

- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.

- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.

- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.

- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.

- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.

- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.

- Lint cleanup.

- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.

- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".

- Document the "pager-off" variable: if set, it disables paging
entirely.

branches: 1.30.20;
Add new Makefile knob, USE_FORT, which extends USE_SSP by turning on the
FORTIFY_SOURCE feature of libssp, thus checking the size of arguments to
various string and memory copy and set functions (as well as a few system
calls and other miscellany) where known at function entry. RedHat has
evidently built all "core system packages" with this option for some time.

This option should be used at the top of Makefiles (or Makefile.inc where
this is used for subdirectories) but after any setting of LIB.

This is only useful for userland code, and cannot be used in libc or in
any code which includes the libc internals, because it overrides certain
libc functions with macros. Some effort has been made to make USE_FORT=yes
work correctly for a full-system build by having the bsd.sys.mk logic
disable the feature where it should not be used (libc, libssp iteself,
the kernel) but no attempt has been made to build the entire system with
USE_FORT and doing so will doubtless expose numerous bugs and misfeatures.

Adjust the system build so that all programs and libraries that are setuid,
directly handle network data (including serial comm data), perform
authentication, or appear likely to have (or have a history of having)
data-driven bugs (e.g. file(1)) are built with USE_FORT=yes by default,
with the exception of libc, which cannot use USE_FORT and thus uses
only USE_SSP by default. Tested on i386 with no ill results; USE_FORT=no
per-directory or in a system build will disable if desired.

From Anon Ymous:
1) Remove a stray "SRCS+=" line from the Makefile.
2) Document the "nospec" option of "regex-search".
3) Fix some typos and formatting in the manpage.

branches: 1.28.2;
From Anon Ymous:

1) Statification of modules.

2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.

3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.

4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).

5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)

6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.

7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).

8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).

9) Extend paging to all commands (where relevant).

10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.

11) The manpage should follow soon!!!!

More fixes from Anon Ymous:


1) Removed the -B flag (it was stupid on my part) and added a short
description indicating how to accomplish the same thing under the
"Sending Mail" section of man mail(1).

2) Added a -H flag to dump the headers and exit. It takes optional
flags to restrict to old, new, read, unread, and deleted messages
(the later being kind of useless - it shares code with something
that already had it).

3) Restored the 'Save' command which somehow got mistakenly removed in
the last commit and add documentation for it! (My apologies to
its author.)

4) Added a 'mkread' command to mark messages as read (the inverse of
'unread'). Should we also have a 'mknew' command?

5) Added a 'smopts' command to keep a database of addresses and
sendmail options to be used when sending messages to those
addresses. See man mail(1) for a fuller description.

6) Added 'indentpreamble' and 'indentpostscript' variables whose
values are inserted before and after a quoted message (~m or ~M
escapes).
=20
7) Added string formatting abilities for the 'prompt', 'insertpreamble',
'insertpostscript', and header display strings. These strings
support all the strftime() format parameters as well as many more
specific to mail (see man mail(1)).

8) Fix the -a flag so that it only takes a single filename, unless
"mime-attach-list" is defined. This is more conventional and avoids
unexpected whitespace issues.

Fix yes/no handling.

From our anonymous user:
- mime and character set handling
- command line editor and completion
- many code improvements

The recently added -ledit needs -ltermcap added as well.

Jumbo mail patch from our anonymous user:

1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).

2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.

3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.

4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.

5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.

6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:

mail -c "foo bar" christos

will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.

7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.

8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.

WARNS=3

Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.

XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.

WARNS=2.

use ${INSTALL_FILE} as appropriate

Rename "aux.c" to "support.c" to avoid clash with invalid "aux" basename
on some Microsoft host OS's.

Use ${COPY} instead of -c for ${INSTALL} commands.

Pass ${INSTPRIV} to ${INSTALL}.

branches: 1.15.10;
convert from NOxxx= to MKxxx=no.
include <bsd.own.mk> if testing a MKxxx variable.

don't install in /usr/share if NOSHARE is defined

Use bsd.subdir.mk as appropriate.

- Makefile cleanups

mail.rc now installed by 'make distribution' -- fixes pr-3015

Sync with 4.4BSD-Lite2

Use ${INSTALL}.

- Fix PR/105: Implement dot locking protocol and check return value of flock.
- Fix PR/2247: Don't call unknown users "ubluit". Issue an error message.
- Fix/add prototypes.
- Fix warnings.
- Use POSIX signal mask calls.
- RCSid police.

USE_OLD_TTY no longer needed

kill -R in CFLAGS

Install doc files.

branches: 1.4.2;
4.4-lite, plus our mods

Install mail as mailx too.
It's not quite POSIX compliant, but it only needs a few tweaks here and there.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

fix sun2

introduce some common variables for use in GCC warning disables:

GCC_NO_FORMAT_TRUNCATION -Wno-format-truncation (GCC 7/8)
GCC_NO_STRINGOP_TRUNCATION -Wno-stringop-truncation (GCC 8)
GCC_NO_STRINGOP_OVERFLOW -Wno-stringop-overflow (GCC 8)
GCC_NO_CAST_FUNCTION_TYPE -Wno-cast-function-type (GCC 8)

use these to turn off warnings for most GCC-8 complaints. many
of these are false positives, most of the real bugs are already
commited, or are yet to come.


we plan to introduce versions of (some?) of these that use the
"-Wno-error=" form, which still displays the warnings but does
not make it an error, and all of the above will be re-considered
as either being "fix me" (warning still displayed) or "warning
is wrong."

use SUBDIR.roff suggested by uwe@

Remove Mail

branches: 1.36.22;
Rework /usr/share/doc.

Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.

- Build and install text, ps, pdf, and/or html, not roff sources.

- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.

- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.

- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.

- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)

- Enumerate the .png files groff emits along with html so they can be
installed.

- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn

- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.

- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.

Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.

branches: 1.35.8; 1.35.18;
document non-literal format string

Userland now builds and uses terminfo instead of termcap.

OK: core@, jdc@

Enable WARNS=4 by default for usr.bin, except for:
awk bdes checknr compile_et error gss hxtool kgetcred kinit
klist ldd less lex locale login m4 man menuc mk_cmds
mklocale msgc openssl rpcgen rpcinfo sdiff spell ssh
string2key telnet tn3270 verify_krb5_conf xlint

- magic fix for short files
- knf
from Anon Ymous

From Anon Ymous:

- Remove all longjmp(3) calls from signal handlers. Instead, we post
to an internal signal queue and check that periodically. All signal
related code is now in sig.c, except for the SIGCHLD handler which
remains in popen.c as it is intimately tied to routines there.

- Handle SIGPIPE in type1() regardless of mime support, or else the
handler in execute() will prevent our error code from being returned
resulting in 'sawcom' not being set on the first command as it should.
This only affected the initial behavior of the "next" command without
mime support.

- Add the 'T' flag to many commands in cmdtab.c that should not look
like the first command. E.g., start mail on a mailbox with multiple
messages, run "set foo", then "next", and watch the second message get
displayed rather than the first as is the case without the first "set"
command.

- Add file descriptor and file handle leak detection. Enabled by
DEBUG_FILE_LEAK. This will likely disappear in the future.

- Fix a long standing (since import in 1993) longjmp() bug in
edstop(): the jmpbuf was invalid when quit() is called at the end of
main.

- Fix a long standing bug (since import in 1993) in snarf() where it
didn't strip whitespace correctly if the line consisted only of
whitespace.

- Lint cleanup.

- New Feature: "Header" command. This allows miscellaneous header
fields to be added to the header, e.g., "X-Organization:" or
"Reply-To:" fields.

- New Feature: "page-also" variable. This allows the specification of
additional commands to page. It is more flexible than "crt".

- Document the "pager-off" variable: if set, it disables paging
entirely.

branches: 1.30.20;
Add new Makefile knob, USE_FORT, which extends USE_SSP by turning on the
FORTIFY_SOURCE feature of libssp, thus checking the size of arguments to
various string and memory copy and set functions (as well as a few system
calls and other miscellany) where known at function entry. RedHat has
evidently built all "core system packages" with this option for some time.

This option should be used at the top of Makefiles (or Makefile.inc where
this is used for subdirectories) but after any setting of LIB.

This is only useful for userland code, and cannot be used in libc or in
any code which includes the libc internals, because it overrides certain
libc functions with macros. Some effort has been made to make USE_FORT=yes
work correctly for a full-system build by having the bsd.sys.mk logic
disable the feature where it should not be used (libc, libssp iteself,
the kernel) but no attempt has been made to build the entire system with
USE_FORT and doing so will doubtless expose numerous bugs and misfeatures.

Adjust the system build so that all programs and libraries that are setuid,
directly handle network data (including serial comm data), perform
authentication, or appear likely to have (or have a history of having)
data-driven bugs (e.g. file(1)) are built with USE_FORT=yes by default,
with the exception of libc, which cannot use USE_FORT and thus uses
only USE_SSP by default. Tested on i386 with no ill results; USE_FORT=no
per-directory or in a system build will disable if desired.

From Anon Ymous:
1) Remove a stray "SRCS+=" line from the Makefile.
2) Document the "nospec" option of "regex-search".
3) Fix some typos and formatting in the manpage.

branches: 1.28.2;
From Anon Ymous:

1) Statification of modules.

2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.

3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.

4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).

5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)

6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.

7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).

8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).

9) Extend paging to all commands (where relevant).

10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.

11) The manpage should follow soon!!!!

More fixes from Anon Ymous:


1) Removed the -B flag (it was stupid on my part) and added a short
description indicating how to accomplish the same thing under the
"Sending Mail" section of man mail(1).

2) Added a -H flag to dump the headers and exit. It takes optional
flags to restrict to old, new, read, unread, and deleted messages
(the later being kind of useless - it shares code with something
that already had it).

3) Restored the 'Save' command which somehow got mistakenly removed in
the last commit and add documentation for it! (My apologies to
its author.)

4) Added a 'mkread' command to mark messages as read (the inverse of
'unread'). Should we also have a 'mknew' command?

5) Added a 'smopts' command to keep a database of addresses and
sendmail options to be used when sending messages to those
addresses. See man mail(1) for a fuller description.

6) Added 'indentpreamble' and 'indentpostscript' variables whose
values are inserted before and after a quoted message (~m or ~M
escapes).
=20
7) Added string formatting abilities for the 'prompt', 'insertpreamble',
'insertpostscript', and header display strings. These strings
support all the strftime() format parameters as well as many more
specific to mail (see man mail(1)).

8) Fix the -a flag so that it only takes a single filename, unless
"mime-attach-list" is defined. This is more conventional and avoids
unexpected whitespace issues.

Fix yes/no handling.

From our anonymous user:
- mime and character set handling
- command line editor and completion
- many code improvements

The recently added -ledit needs -ltermcap added as well.

Jumbo mail patch from our anonymous user:

1) Use editline [optional]:
Most of this code was borrowed from src/usr.bin/ftp. It does the
appropriate editing, history, and completion for all mail commands
(from cmdtab[]) and also does editing on header strings ('~h' inside
the mail editor).

2) '-B' flag:
This will suppress the "To:" line passed to sendmail. In most
configurations it will lead to sendmail adding "To: undisclosed
recipients;". Currently, AFAIK mail requires at least one exposed
recipient address.

3) Comments in rcfile:
Currently, comments in .mailrc are only supported if the first
(non-white) character on a line is '#' followed by white space,
i.e., '#' is a 'nop' command. This (trivial) patch allows the more
normal/expected use of '#' as a comment character. It does not
respect quoting, so that might be an objection which I should fix.

4) Sendmail option editing:
This adds the sendmail option string to the strings editable by the
'~h' command within the mail editor. Currently, you can only set
this string from the command-line, which is particularly annoying
when replying to mail.

5) Reply from:
When replying to a message, grab the "To:" address from the message
and, if there is only one such address and it does not match a list of
allowed addresses (set in the "ReplyFrom" variable), pass it to
sendmail as the "From:" address for the reply (with the '-f' option).
I often make aliases for myself so that my primary address is not
given out; if the alias gets out, I know who to blame. Unfortunately,
a reply to such a message would normally use the primary address
without this patch. A warning is displayed when this is going to
happen so that it can be modified with '~h'.

6) CC and BCC lists:
Allow '-c' and '-b' to accept white-space or ',' delimited lists.
Currently, a white-space delimited list of addresses work, but a
list of aliases will not get expanded. For example, currently:

mail -c "foo bar" christos

will fail to send mail to 'foo' and 'bar' if these are mail aliases
(in ~/.mailrc); sendmail aliases (in /etc/aliases) do work.

7) pipe command:
This pipes the current message into a shell command. I use this for
quick decoding of uuencoded mail, but I can imagine it might be
useful for decrypting encrypted mail, too.

8) show command:
This command takes a list of variables and shows their values. It
is probably stupid as the 'set' command without any argument
displays all variable values. Of course, if there are a lot of
variables you have to sift through the list for the one(s) you want.

WARNS=3

Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.

XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.

WARNS=2.

use ${INSTALL_FILE} as appropriate

Rename "aux.c" to "support.c" to avoid clash with invalid "aux" basename
on some Microsoft host OS's.

Use ${COPY} instead of -c for ${INSTALL} commands.

Pass ${INSTPRIV} to ${INSTALL}.

branches: 1.15.10;
convert from NOxxx= to MKxxx=no.
include <bsd.own.mk> if testing a MKxxx variable.

don't install in /usr/share if NOSHARE is defined

Use bsd.subdir.mk as appropriate.

- Makefile cleanups

mail.rc now installed by 'make distribution' -- fixes pr-3015

Sync with 4.4BSD-Lite2

Use ${INSTALL}.

- Fix PR/105: Implement dot locking protocol and check return value of flock.
- Fix PR/2247: Don't call unknown users "ubluit". Issue an error message.
- Fix/add prototypes.
- Fix warnings.
- Use POSIX signal mask calls.
- RCSid police.

USE_OLD_TTY no longer needed

kill -R in CFLAGS

Install doc files.

branches: 1.4.2;
4.4-lite, plus our mods

Install mail as mailx too.
It's not quite POSIX compliant, but it only needs a few tweaks here and there.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision