tests/rump/rumpkern: Use PROGDPLIBS, not explicit -L/-l.

This way we relink the t_* test programs whenever changes under
tests/rump/kernspace change libkernspace.a.

Centralize the base rump libraries into a variable used by all the other
Makefiles so that we can make changes to it centrally as needed and have
less mess. Fixes the sun2 build that needs rumpvfs after librump after
the latest changes.

Add -lrump after -lkernspace, because kernspace.a references symbols
from librump and hooray for static linking semantics.

Fixes sun2 build issue reported by kre@.

(XXX WTF did this only start failing after the addition of t_threadpool?)

Add rump-based test cases for threadpool(9).

branches: 1.16.2; 1.16.4;
Add simple test for workqueue(9)

branches: 1.15.16;
Fix static linking for the tests: -lrump is also used by -lrumpuser,
so we also need -lrump after -lrumpuser. Fixes build for sun2.

branches: 1.14.12; 1.14.22;
test remove signal delivery

elementary tests for rump sigmodels

Add some tests for lock errors. Notably, some of them fare nicely
with just the pthread consistency checks (which are enabled by
default in rumpuser), but others require real LOCKDEBUG.

Retire h_simpleserver and use rump_server instead.

Add a simple and stress test cases for the rump remote syscall code.
Fun fact: since the server daemonizes into its own process group,
it's not in atf's pgrp. Use rump_sys_reboot() in atf cleanup to
kill the server after the test.

Test copystr/copyinstr/copyoutstr focusing on the off-by-one cases.

As a notable caveat, this does not test the remote RPC paths of
those routines, which are arguably a little more complex.

tests for rump_lwproc

add tests for:
* threading
* tsleep variants
* uvm page busying and wanting

msdosfs depends on disk devices now

It seems that LDADD.file gets added to the linker invocation after
the LDADD variable expansion. To support static linking, ensure
that the common libraries gets tacked on at the end as well (order
matters for static linking), by using a convenience variable and
add it to the end of LDADD.t_modlinkset, as well as when doing the
general LDADD+= setting.

WARNS=4

Add regression test to verify that linksets work correctly with rump.

Apparently, there's not a clear dependency ordering for the libraries,
this becomes apparent when linking statically (e.g. as for sun2).
Add an extra instance of -lrump to the library list so that it can be
linked statically as well.

branches: 1.1.2;
add regression test for module init/fini in rump

Centralize the base rump libraries into a variable used by all the other
Makefiles so that we can make changes to it centrally as needed and have
less mess. Fixes the sun2 build that needs rumpvfs after librump after
the latest changes.

Add -lrump after -lkernspace, because kernspace.a references symbols
from librump and hooray for static linking semantics.

Fixes sun2 build issue reported by kre@.

(XXX WTF did this only start failing after the addition of t_threadpool?)

Add rump-based test cases for threadpool(9).

branches: 1.16.2; 1.16.4;
Add simple test for workqueue(9)

branches: 1.15.16;
Fix static linking for the tests: -lrump is also used by -lrumpuser,
so we also need -lrump after -lrumpuser. Fixes build for sun2.

branches: 1.14.12; 1.14.22;
test remove signal delivery

elementary tests for rump sigmodels

Add some tests for lock errors. Notably, some of them fare nicely
with just the pthread consistency checks (which are enabled by
default in rumpuser), but others require real LOCKDEBUG.

Retire h_simpleserver and use rump_server instead.

Add a simple and stress test cases for the rump remote syscall code.
Fun fact: since the server daemonizes into its own process group,
it's not in atf's pgrp. Use rump_sys_reboot() in atf cleanup to
kill the server after the test.

Test copystr/copyinstr/copyoutstr focusing on the off-by-one cases.

As a notable caveat, this does not test the remote RPC paths of
those routines, which are arguably a little more complex.

tests for rump_lwproc

add tests for:
* threading
* tsleep variants
* uvm page busying and wanting

msdosfs depends on disk devices now

It seems that LDADD.file gets added to the linker invocation after
the LDADD variable expansion. To support static linking, ensure
that the common libraries gets tacked on at the end as well (order
matters for static linking), by using a convenience variable and
add it to the end of LDADD.t_modlinkset, as well as when doing the
general LDADD+= setting.

WARNS=4

Add regression test to verify that linksets work correctly with rump.

Apparently, there's not a clear dependency ordering for the libraries,
this becomes apparent when linking statically (e.g. as for sun2).
Add an extra instance of -lrump to the library list so that it can be
linked statically as well.

branches: 1.1.2;
add regression test for module init/fini in rump

Add -lrump after -lkernspace, because kernspace.a references symbols
from librump and hooray for static linking semantics.

Fixes sun2 build issue reported by kre@.

(XXX WTF did this only start failing after the addition of t_threadpool?)

Add rump-based test cases for threadpool(9).

branches: 1.16.2;
Add simple test for workqueue(9)

branches: 1.15.16;
Fix static linking for the tests: -lrump is also used by -lrumpuser,
so we also need -lrump after -lrumpuser. Fixes build for sun2.

branches: 1.14.12; 1.14.22;
test remove signal delivery

elementary tests for rump sigmodels

Add some tests for lock errors. Notably, some of them fare nicely
with just the pthread consistency checks (which are enabled by
default in rumpuser), but others require real LOCKDEBUG.

Retire h_simpleserver and use rump_server instead.

Add a simple and stress test cases for the rump remote syscall code.
Fun fact: since the server daemonizes into its own process group,
it's not in atf's pgrp. Use rump_sys_reboot() in atf cleanup to
kill the server after the test.

Test copystr/copyinstr/copyoutstr focusing on the off-by-one cases.

As a notable caveat, this does not test the remote RPC paths of
those routines, which are arguably a little more complex.

tests for rump_lwproc

add tests for:
* threading
* tsleep variants
* uvm page busying and wanting

msdosfs depends on disk devices now

It seems that LDADD.file gets added to the linker invocation after
the LDADD variable expansion. To support static linking, ensure
that the common libraries gets tacked on at the end as well (order
matters for static linking), by using a convenience variable and
add it to the end of LDADD.t_modlinkset, as well as when doing the
general LDADD+= setting.

WARNS=4

Add regression test to verify that linksets work correctly with rump.

Apparently, there's not a clear dependency ordering for the libraries,
this becomes apparent when linking statically (e.g. as for sun2).
Add an extra instance of -lrump to the library list so that it can be
linked statically as well.

branches: 1.1.2;
add regression test for module init/fini in rump

Add simple test for workqueue(9)

Fix static linking for the tests: -lrump is also used by -lrumpuser,
so we also need -lrump after -lrumpuser. Fixes build for sun2.

branches: 1.14.12; 1.14.22;
test remove signal delivery

elementary tests for rump sigmodels

Add some tests for lock errors. Notably, some of them fare nicely
with just the pthread consistency checks (which are enabled by
default in rumpuser), but others require real LOCKDEBUG.

Retire h_simpleserver and use rump_server instead.

Add a simple and stress test cases for the rump remote syscall code.
Fun fact: since the server daemonizes into its own process group,
it's not in atf's pgrp. Use rump_sys_reboot() in atf cleanup to
kill the server after the test.

Test copystr/copyinstr/copyoutstr focusing on the off-by-one cases.

As a notable caveat, this does not test the remote RPC paths of
those routines, which are arguably a little more complex.

tests for rump_lwproc

add tests for:
* threading
* tsleep variants
* uvm page busying and wanting

msdosfs depends on disk devices now

It seems that LDADD.file gets added to the linker invocation after
the LDADD variable expansion. To support static linking, ensure
that the common libraries gets tacked on at the end as well (order
matters for static linking), by using a convenience variable and
add it to the end of LDADD.t_modlinkset, as well as when doing the
general LDADD+= setting.

WARNS=4

Add regression test to verify that linksets work correctly with rump.

Apparently, there's not a clear dependency ordering for the libraries,
this becomes apparent when linking statically (e.g. as for sun2).
Add an extra instance of -lrump to the library list so that it can be
linked statically as well.

branches: 1.1.2;
add regression test for module init/fini in rump