Rework the xxxVERBOSE option to share the common module-hook-based
verbose mechanism with MIIVERBOSE. This reduces some duplicated code
and allows us to once again permit auto-unload of MIIVERBOSE.

Change details:
* Update dev/devlist2h.awk to accomodate miidevs, including generation
of MII_STR_oui_model definitions and use of oui and model rather than
vendor and product. This also changes the compressed data in the
xxxdevs_data.h files to uint32_t (since mii oui's are up to 6 hex
digits long)
* Update a couple of phy drivers to use new calls to get verbose data
* Regen all of the xxxdevs{,_data}.h files (separate commit, coming
very soon)
* Update mii/mii_verbose.[ch] and mii/mii_physubr.c to use the various
DEV_VERBOSE_xxx macros
* Update the pci, usb, and hdaudio code as needed, to #include the
xxxdevs.h files (in order to get the proper printf format strings)
* Since dev/dev_verbose.c now uses non-literal printf format strings,
(to deal with the vendor/product vs oui/model issue), we need to
make sure it gets compiled with -Wno-error=format-nonliteral, even
in userland's libpci and librumpdev!
* Bump kernel version for the change in module interfaces

Welcome to 9.99.86!

XXX It might be useful in the future to extend the MII_STR_oui_model
XXX definitions to PCI as well (and perhaps USB and HDAUDIO). This
XXX would allow for a single centralized location for the products'
XXX descriptions, rather than being dispersed among individual
XXX drivers' xxx_match tables.

On the one thousand and ninth day rump's mainbus was moved from
rumpdev to rumpkern, liberating all rumpnet users from the need to
-lrumpdev -lrumpvfs just because a loopback interface is mandatory.

Rename rumpdev/autoconf.c to rumpkern/rump_autoconf.c to avoid
accidentally picking up e.g. sys/arch/amd64/amd64/autoconf.c through
make's .PATH.
Move rumpdev/MAINBUS.ioconf to rumpkern.

branches: 1.12.18;
Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

some final -Ifoo/opt removal

build dev_verbose.c

Remove shlib_version files and just use Makefile SHLIB_MAJOR/MINOR,
with the default provided by Makefile.rump (they're all 0.0 anyway)

branches: 1.8.6;
use ioconf for mainbus

Move the bus_dma implementation that works only with ugenhc into the
ugenhc component itself.

branches: 1.6.6;
Allow Makefile.rump to append to SRCS.

branches: 1.5.10; 1.5.20;
Globally define -Wno-pointer-sign, as it has become a pointless
exercise of "add it to every Makefile individually".

XXX: should autosynchronize with the rest of the kernel buildflags
in sys/conf/Makefile.kern.inc.

Now that there is a working bus.h for all architectures, move rump
bus dma out of a wip place and into rumpdev where it belongs.

branches: 1.3.2;
Include kern_pmf.c in rumpdev.

Rename rump_dev_makenodes() to rump_vfs_makedevnodes() -- while it
will most likely be used devices, the implementation requires
services provided by vfs (mkdir, mknod).

branches: 1.1.2; 1.1.4;
device subroutines and autoconfig support for rump. work in progress.

On the one thousand and ninth day rump's mainbus was moved from
rumpdev to rumpkern, liberating all rumpnet users from the need to
-lrumpdev -lrumpvfs just because a loopback interface is mandatory.

Rename rumpdev/autoconf.c to rumpkern/rump_autoconf.c to avoid
accidentally picking up e.g. sys/arch/amd64/amd64/autoconf.c through
make's .PATH.
Move rumpdev/MAINBUS.ioconf to rumpkern.

Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

some final -Ifoo/opt removal

build dev_verbose.c

Remove shlib_version files and just use Makefile SHLIB_MAJOR/MINOR,
with the default provided by Makefile.rump (they're all 0.0 anyway)

branches: 1.8.6;
use ioconf for mainbus

Move the bus_dma implementation that works only with ugenhc into the
ugenhc component itself.

branches: 1.6.6;
Allow Makefile.rump to append to SRCS.

branches: 1.5.10; 1.5.20;
Globally define -Wno-pointer-sign, as it has become a pointless
exercise of "add it to every Makefile individually".

XXX: should autosynchronize with the rest of the kernel buildflags
in sys/conf/Makefile.kern.inc.

Now that there is a working bus.h for all architectures, move rump
bus dma out of a wip place and into rumpdev where it belongs.

branches: 1.3.2;
Include kern_pmf.c in rumpdev.

Rename rump_dev_makenodes() to rump_vfs_makedevnodes() -- while it
will most likely be used devices, the implementation requires
services provided by vfs (mkdir, mknod).

branches: 1.1.2; 1.1.4;
device subroutines and autoconfig support for rump. work in progress.

Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

some final -Ifoo/opt removal

build dev_verbose.c

Remove shlib_version files and just use Makefile SHLIB_MAJOR/MINOR,
with the default provided by Makefile.rump (they're all 0.0 anyway)

branches: 1.8.6;
use ioconf for mainbus

Move the bus_dma implementation that works only with ugenhc into the
ugenhc component itself.

branches: 1.6.6;
Allow Makefile.rump to append to SRCS.

branches: 1.5.10; 1.5.20;
Globally define -Wno-pointer-sign, as it has become a pointless
exercise of "add it to every Makefile individually".

XXX: should autosynchronize with the rest of the kernel buildflags
in sys/conf/Makefile.kern.inc.

Now that there is a working bus.h for all architectures, move rump
bus dma out of a wip place and into rumpdev where it belongs.

branches: 1.3.2;
Include kern_pmf.c in rumpdev.

Rename rump_dev_makenodes() to rump_vfs_makedevnodes() -- while it
will most likely be used devices, the implementation requires
services provided by vfs (mkdir, mknod).

branches: 1.1.2; 1.1.4;
device subroutines and autoconfig support for rump. work in progress.