We no longer need the deprecated copyback functionality now that
incorporating a used spare is automatic.

Copyback has always been an issue, as to do a copyback all IO to
the array had to be suspended, and so was very, very unlikely to
have been used in anything resembling a production system.

kill compat code dependencies.

don't assume _LP64 == supports COMPAT_NETBSD32.

this is not true for alpha, ia64 and arm32 ports, and the first two
were not building because of it, and the latter would be missing
the oabi support (likely not a big deal, but still wrong.)

add a makefile fragment that tells you if it is supported and include
it where needed to define COMPAT_NETBSD32 when building the normal
kernel (ie, modules & rump.)


fixes alpha build, probably fixes ia64 build.


XXX: still leaves some netbsd32 code in rf_netbsdkintf.c, that should
be moved into some hooks, but first the configuration setup
needs to be moved into a common function the netbsd32 code can
call into, vs living in the switch case itself.

branches: 1.11.4;
implement 32-bit compat support for raidframe.

convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.

raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument

rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.

rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.

move several of the per-ioctl code blocks into separate functions.

add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.

add missing case for RAIDFRAME_GET_INFO50.

adjust raid tests to use the new .conf format, and add a case to
test the old method as well.

raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)

note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.

Put the kernelside rump kernel headers into <rump-sys> instead of
sprinkling them around the faction directories. Avoids having
to add a CPPFLAGS (or several) to pretty much every component
Makefile.

Leave compat headers around in the old locations.

The commit changes some autogenerated files, but I'll fix the
generators shortly and regen.

Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

put back bsd.init.mk

use ioconf files for pseudo-device attach prototypes

Rename RUMP_COMPAT to RUMP_NBCOMBAT to better signify what the
variable does.

Build compat code only when specified by RUMP_COMPAT

branches: 1.4.6;
rename component.c -> raidframe_component.c

branches: 1.3.12; 1.3.22; 1.3.26;
Add rf_paritymap.c, which is now required for raidframe.

one more ketchup with rump_dev_makenodes -> rump_vfs_makedevnodes

branches: 1.1.2;
Checkpoint a bunch of work-in-progress: support for disk devices
and raidframe. Raidframe works well enough to configure a raid in
the rump kernel, but the usage is "interesting" (pending some other
changes/cleanup from other parts in my tree).

These are not built by default yet.

kill compat code dependencies.

don't assume _LP64 == supports COMPAT_NETBSD32.

this is not true for alpha, ia64 and arm32 ports, and the first two
were not building because of it, and the latter would be missing
the oabi support (likely not a big deal, but still wrong.)

add a makefile fragment that tells you if it is supported and include
it where needed to define COMPAT_NETBSD32 when building the normal
kernel (ie, modules & rump.)


fixes alpha build, probably fixes ia64 build.


XXX: still leaves some netbsd32 code in rf_netbsdkintf.c, that should
be moved into some hooks, but first the configuration setup
needs to be moved into a common function the netbsd32 code can
call into, vs living in the switch case itself.

implement 32-bit compat support for raidframe.

convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.

raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument

rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.

rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.

move several of the per-ioctl code blocks into separate functions.

add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.

add missing case for RAIDFRAME_GET_INFO50.

adjust raid tests to use the new .conf format, and add a case to
test the old method as well.

raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)

note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.

Put the kernelside rump kernel headers into <rump-sys> instead of
sprinkling them around the faction directories. Avoids having
to add a CPPFLAGS (or several) to pretty much every component
Makefile.

Leave compat headers around in the old locations.

The commit changes some autogenerated files, but I'll fix the
generators shortly and regen.

Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

put back bsd.init.mk

use ioconf files for pseudo-device attach prototypes

Rename RUMP_COMPAT to RUMP_NBCOMBAT to better signify what the
variable does.

Build compat code only when specified by RUMP_COMPAT

branches: 1.4.6;
rename component.c -> raidframe_component.c

branches: 1.3.12; 1.3.22; 1.3.26;
Add rf_paritymap.c, which is now required for raidframe.

one more ketchup with rump_dev_makenodes -> rump_vfs_makedevnodes

branches: 1.1.2;
Checkpoint a bunch of work-in-progress: support for disk devices
and raidframe. Raidframe works well enough to configure a raid in
the rump kernel, but the usage is "interesting" (pending some other
changes/cleanup from other parts in my tree).

These are not built by default yet.

implement 32-bit compat support for raidframe.

convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.

raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument

rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.

rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.

move several of the per-ioctl code blocks into separate functions.

add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.

add missing case for RAIDFRAME_GET_INFO50.

adjust raid tests to use the new .conf format, and add a case to
test the old method as well.

raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)

note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.

Put the kernelside rump kernel headers into <rump-sys> instead of
sprinkling them around the faction directories. Avoids having
to add a CPPFLAGS (or several) to pretty much every component
Makefile.

Leave compat headers around in the old locations.

The commit changes some autogenerated files, but I'll fix the
generators shortly and regen.

Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

put back bsd.init.mk

use ioconf files for pseudo-device attach prototypes

Rename RUMP_COMPAT to RUMP_NBCOMBAT to better signify what the
variable does.

Build compat code only when specified by RUMP_COMPAT

branches: 1.4.6;
rename component.c -> raidframe_component.c

branches: 1.3.12; 1.3.22; 1.3.26;
Add rf_paritymap.c, which is now required for raidframe.

one more ketchup with rump_dev_makenodes -> rump_vfs_makedevnodes

branches: 1.1.2;
Checkpoint a bunch of work-in-progress: support for disk devices
and raidframe. Raidframe works well enough to configure a raid in
the rump kernel, but the usage is "interesting" (pending some other
changes/cleanup from other parts in my tree).

These are not built by default yet.

Put the kernelside rump kernel headers into <rump-sys> instead of
sprinkling them around the faction directories. Avoids having
to add a CPPFLAGS (or several) to pretty much every component
Makefile.

Leave compat headers around in the old locations.

The commit changes some autogenerated files, but I'll fix the
generators shortly and regen.

Add a COMMENT describing what each component roughly does.

"make describe" prints the comment.

Requested/inspired by Vincent Schwarzer on rumpkernel-users

put back bsd.init.mk

use ioconf files for pseudo-device attach prototypes

Rename RUMP_COMPAT to RUMP_NBCOMBAT to better signify what the
variable does.

Build compat code only when specified by RUMP_COMPAT

branches: 1.4.6;
rename component.c -> raidframe_component.c

branches: 1.3.12; 1.3.22; 1.3.26;
Add rf_paritymap.c, which is now required for raidframe.

one more ketchup with rump_dev_makenodes -> rump_vfs_makedevnodes

branches: 1.1.2;
Checkpoint a bunch of work-in-progress: support for disk devices
and raidframe. Raidframe works well enough to configure a raid in
the rump kernel, but the usage is "interesting" (pending some other
changes/cleanup from other parts in my tree).

These are not built by default yet.