Fix memory leaks pointed out by Ilja Van Sprundel: all
sendoob() functions are expted to free both passed
mbuf chains.

branches: 1.37.10;
make connect syscall use sockaddr_big and modify pr_{send,connect}
nam parameter type from buf * to sockaddr *.

final commit for parameter type changes to protocol user requests

* bump kernel version to 7.99.15 for parameter type changes to pr_{send,connect}

remove pr_generic from struct pr_usrreqs and all implementations of
pr_generic in protocols.

bump to 7.99.13

approved by rmind@

make accept, getsockname and getpeername syscalls use sockaddr_big and modify
pr_{accept,sockname,peername} nam parameter type from mbuf * to sockaddr *.

* retained use of mbuftypes[MT_SONAME] for now.
* bump to netbsd version 7.99.12 for parameter type change.

patch posted to tech-net@ 2015/04/19

* change pr_bind to accept struct sockaddr * instead of struct mbuf *
* update protocol bind implementations to use/expect sockaddr *
instead of mbuf *
* introduce sockaddr_big struct for storage of addr data passed via
sys_bind; sockaddr_big is of sufficient size and alignment to
accommodate all addr data sizes received.
* modify sys_bind to allocate sockaddr_big instead of using an mbuf.
* bump kernel version to 7.99.9 for change to pr_bind() parameter type.

Patch posted to tech-net@
http://mail-index.netbsd.org/tech-net/2015/03/15/msg005004.html

The choice to use a new structure sockaddr_big has been retained since
changing sockaddr_storage size would lead to unnecessary ABI change. The
use of the new structure does not preclude future work that increases
the size of sockaddr_storage and at that time sockaddr_big may be
trivially replaced.

Tested by mrg@ and myself, discussed with rmind@, posted to tech-net@

branches: 1.33.2; 1.33.4; 1.33.6; 1.33.10;
split PRU_CONNECT2 & PRU_PURGEIF function out of pr_generic() usrreq
switches and put into separate functions

- always KASSERT(solocked(so)) even if not implemented
(for PRU_CONNECT2 only)

- replace calls to pr_generic() with req = PRU_CONNECT2 with calls to
pr_connect2()

- replace calls to pr_generic() with req = PRU_PURGEIF with calls to
pr_purgeif()

put common code from unp_connect2() (used by unp_connect() into
unp_connect1() and call out to it when needed

patch only briefly reviewed by rmind@

split PRU_RCVD function out of pr_generic() usrreq switches and put into
separate functions

- always KASSERT(solocked(so)) even if not implemented

- replace calls to pr_generic() with req = PRU_RCVD with calls to
pr_rcvd()

split PRU_SEND function out of pr_generic() usrreq switches and put into
separate functions

xxx_send(struct socket *, struct mbuf *, struct mbuf *,
struct mbuf *, struct lwp *)

- always KASSERT(solocked(so)) even if not implemented

- replace calls to pr_generic() with req = PRU_SEND with calls to
pr_send()

rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_send() PRUs

- l2cap_send() -> l2cap_send_pcb()
- sco_send() -> sco_send_pcb()
- rfcomm_send() -> rfcomm_send_pcb()

patch reviewed by rmind

revert the removal of struct lwp * parameter from bind, listen and connect
user requests.

this should resolve the issue relating to nfs client hangs presented
recently by wiz on current-users@

release mbuf on failure of PRU_SEND

split PRU_DISCONNECT, PRU_SHUTDOWN and PRU_ABORT function out of
pr_generic() usrreq switches and put into separate functions

xxx_disconnect(struct socket *)
xxx_shutdown(struct socket *)
xxx_abort(struct socket *)

- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req =
PRU_{DISCONNECT,SHUTDOWN,ABORT}
with calls to pr_{disconnect,shutdown,abort}() respectively

rename existing internal functions used to implement above functionality
to permit use of the names for xxx_{disconnect,shutdown,abort}().

- {l2cap,sco,rfcomm}_disconnect() ->
{l2cap,sco,rfcomm}_disconnect_pcb()
- {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1()
- unp_shutdown() -> unp_shutdown1()

patch reviewed by rmind

split PRU_CONNECT function out of pr_generic() usrreq switches and put
into seaparate functions

xxx_listen(struct socket *, struct mbuf *)

- always KASSERT(solocked(so)) and KASSERT(nam != NULL)
- replace calls to pr_generic() with req = PRU_CONNECT with
pr_connect()
- rename existin {l2cap,sco,rfcomm}_connect() to
{l2cap,sco,rfcomm}_connect_pcb() respectively to permit
naming consistency with other protocols functions.
- drop struct lwp * parameter from unp_connect() and at_pcbconnect()
and use curlwp instead where appropriate.

patch reviewed by rmind

split PRU_BIND and PRU_LISTEN function out of pr_generic() usrreq
switches and put into separate functions
xxx_bind(struct socket *, struct mbuf *)
xxx_listen(struct socket *)

- always KASSERT(solocked(so)) even if not implemented

- replace calls to pr_generic() with req = PRU_BIND with call to
pr_bind()

- replace calls to pr_generic() with req = PRU_LISTEN with call to
pr_listen()

- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and
unp_bind() and always use curlwp.

rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_{bind,listen}() PRUs

- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb()
- sco_{bind,listen}() -> sco_{bind,listen}_pcb()
- rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()

patch reviewed by rmind

welcome to netbsd 6.99.48

split PRU_SENDOOB and PRU_RCVOOB function out of pr_generic() usrreq
switches and put into separate functions
xxx_sendoob(struct socket *, struct mbuf *, struct mbuf *)
xxx_recvoob(struct socket *, struct mbuf *, int)

- always KASSERT(solocked(so)) even if request is not implemented

- replace calls to pr_generic() with req = PRU_{SEND,RCV}OOB with
calls to pr_{send,recv}oob() respectively.

there is still some tweaking of m_freem(m) and m_freem(control) to come
for consistency. not performed with this commit for clarity.

reviewed by rmind

* split PRU_ACCEPT function out of pr_generic() usrreq switches and put
into a separate function xxx_accept(struct socket *, struct mbuf *)

note: future cleanup will take place to remove struct mbuf parameter
type and replace it with a more appropriate type.

patch reviewed by rmind

* split PRU_PEERADDR and PRU_SOCKADDR function out of pr_generic()
usrreq switches and put into separate functions
xxx_{peer,sock}addr(struct socket *, struct mbuf *).

- KASSERT(solocked(so)) always in new functions even if request
is not implemented

- KASSERT(pcb != NULL) and KASSERT(nam) if the request is
implemented and not for tcp.

* for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into
easier to cut & paste functions tcp_debug_capture() and
tcp_debug_trace()

- functions provided by rmind
- remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a
future commit.

* rename netbt functions to permit consistency of pru function names
(as has been done with other requests already split out).

- l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb()
- rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb()
- sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb()

* split/refactor do_sys_getsockname(lwp, fd, which, nam) into
two functions do_sys_get{peer,sock}name(fd, nam).

- move PRU_PEERADDR handling into do_sys_getpeername() from
do_sys_getsockname()
- have svr4_stream directly call do_sys_get{sock,peer}name()
respectively instead of providing `which' & fix a DPRINTF string
that incorrectly wrote "getpeername" when it meant "getsockname"
- fix sys_getpeername() and sys_getsockname() to call
do_sys_get{sock,peer}name() without `which' and `lwp' & adjust
comments
- bump kernel version for removal of lwp & which parameters from
do_sys_getsockname()

note: future cleanup to remove struct mbuf * abuse in
xxx_{peer,sock}name()
still to come, not done in this commit since it is easier to do post
split.

patch reviewed by rmind

welcome to 6.99.47

* sprinkle KASSERT(solocked(so)); in all pr_stat() functions.
* fix remaining inconsistent struct socket parameter names.

backout change that made pr_stat return EOPNOTSUPP for protocols that
were not filling in struct stat.

decision made after further discussion with rmind and investigation of
how other operating systems behave. soo_stat() is doing just enough to
be able to call what gets returned valid and thus justifys a return of
success.

additional review will be done to determine of the pr_stat functions
that were already returning EOPNOTSUPP can be considered successful with
what soo_stat() is doing.

* have pr_stat return EOPNOTSUPP consistently for all protocols that do
not fill in struct stat instead of returning success.

* in pr_stat remove all checks for non-NULL so->so_pcb except where the
pcb is actually used (i.e. cases where we don't return EOPNOTSUPP).

proposed on tech-net@

* split PRU_SENSE functionality out of xxx_usrreq() switches and place into
separate xxx_stat(struct socket *, struct stat *) functions.
* replace calls using pr_generic with req == PRU_SENSE with pr_stat().

further change will follow that cleans up the pattern used to extract the
pcb and test for its presence.

reviewed by rmind

fix parameter types in pr_ioctl, called xx_control() functions and remove
abuse of pointer to struct mbuf type.

param2 changed to u_long type and uses parameter name 'cmd' (ioctl command)
param3 changed to void * type and uses parameter name 'data'
param4 changed to struct ifnet * and uses parameter name 'ifp'
param5 has been removed (formerly struct lwp *) and uses of 'l' have been
replaced with curlwp from curproc(9).

callers have had (now unnecessary) casts to struct mbuf * removed, called
code has had (now unnecessary) casts to u_long, void * and struct ifnet *
respectively removed.

reviewed by rmind@

* split PRU_CONTROL functionality out of xxx_userreq() switches and place
into separate xxx_ioctl() functions.
* place KASSERT(req != PRU_CONTROL) inside xxx_userreq() as it is now
inappropriate for req = PRU_CONTROL in xxx_userreq().
* replace calls to pr_generic() with req = PRU_CONTROL with pr_ioctl().
* remove & fixup references to PRU_CONTROL xxx_userreq() function comments.
* fix various comments references for xxx_userreq() that mentioned
PRU_CONTROL as xxx_userreq() no longer handles the request.

a further change will follow to fix parameter and naming inconsistencies
retained from original code.

Reviewed by rmind@

Adjust PR_WRAP_USRREQS() to include the attach/detach functions.
We still need the kernel-lock for some corner cases.

netbt: rename some attach/detach functions to have _pcb suffix, so
we could use standard attach/detach naming for pr_usrreq functions.
No functional change.

Make it compile without options DIAGNOSTIC by removing a variable only set
once and only tested once in an assert.

- Split off PRU_ATTACH and PRU_DETACH logic into separate functions.
- Replace malloc with kmem and eliminate M_PCB while here.
- Sprinkle more asserts.

Add struct pr_usrreqs with a pr_generic function and prepare for the
dismantling of pr_usrreq in the protocols; no functional change intended.
PRU_ATTACH/PRU_DETACH changes will follow soon.

Bump for struct protosw. Welcome to 6.99.62!

branches: 1.11.2;
Remove SS_ISCONFIRMING, it is unused and TP4 will not come back.

branches: 1.10.28; 1.10.38; 1.10.44;
Convert socket options code to use a sockopt structure
instead of laying everything into an mbuf.

approved by core

branches: 1.9.2; 1.9.4; 1.9.8;
Merge the socket locking patch:

- Socket layer becomes MP safe.
- Unix protocols become MP safe.
- Allows protocol processing interrupts to safely block on locks.
- Fixes a number of race conditions.

With much feedback from matt@ and plunky@.

branches: 1.8.18; 1.8.20;
for PRU_ATTACH, we should make sure that so_pcb is not allocated when
there is any error

branches: 1.7.6; 1.7.8; 1.7.10;
Add 'service level' security for L2CAP and RFCOMM connections, following
the Linux (BlueZ) API.

- L2CAP or RFCOMM connections can require the baseband radio link
mode be any of:
authenticated (devices are paired)
encrypted (implies authentication)
secured (encryption, plus generate new link key)

- for sockets, the mode is set using setsockopt(2) and the socket
connection will be aborted if the mode change fails.

- mode settings will be applied during connection establishment, and
for safety, we enter a wait state and will only proceed when the mode
settings are successfuly set.

- It is possible to change the mode on already open connections, but
not possible to guarantee that data already queued (from either end)
will not be delivered. (this is a feature, not a bug)

- bthidev(4) and rfcomm_sppd(1) support "auth", "encrypt" and
"secure" options

- btdevctl(8) by default enables "auth" for HIDs, and "encrypt" for
keyboards (which are required to support it)

change declaration for protosw.h const symbolic strings to static, so that
they can be used by more than one source file without causing duplicate
definitions.

be more explicit and consistent in use of KASSERT with pointers,
test against NULL

branches: 1.4.2; 1.4.4;
return ENOPROTOOPT when protocol options are not known

branches: 1.3.2; 1.3.4; 1.3.8;
__unused removal on arguments; approved by core.

- sprinkle __unused on function decls.
- fix a couple of unused bugs
- no more -Wno-unused for i386

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8; 1.1.12; 1.1.14; 1.1.16;
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.

The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.

Drivers for both PCMCIA and USB bluetooth controllers are included.