We no longer need the deprecated copyback functionality now that
incorporating a used spare is automatic.

Copyback has always been an issue, as to do a copyback all IO to
the array had to be suspended, and so was very, very unlikely to
have been used in anything resembling a production system.

Bump default value of WARNS for modules from 3 to 5, and
explicitly set WARNS for modules that fail with WARNS=5.

Also, turn on -Wno-missing-noreturn for clang for some files.

At the moment, among ~ 360 modules,
- 2 (lua and zfs) need WARNS=0
- 1 (solaris) needs WARNS=1
- 136 need WARNS=3 (mostly due to sign-compare)
- 4 need WARNS=4
- others can be compiled with WARNS=5

Discussed on tech-kern.

don't assume _LP64 == supports COMPAT_NETBSD32.

this is not true for alpha, ia64 and arm32 ports, and the first two
were not building because of it, and the latter would be missing
the oabi support (likely not a big deal, but still wrong.)

add a makefile fragment that tells you if it is supported and include
it where needed to define COMPAT_NETBSD32 when building the normal
kernel (ie, modules & rump.)


fixes alpha build, probably fixes ia64 build.


XXX: still leaves some netbsd32 code in rf_netbsdkintf.c, that should
be moved into some hooks, but first the configuration setup
needs to be moved into a common function the netbsd32 code can
call into, vs living in the switch case itself.

Remove some commented-out stuff accidentally left in the previous commit.

It's just comments, NFCI

Don't include the raidframe compat code in the main raid module, the
compat code lives in their own compat_raid_xx modules, which will now
be autoloaded if needed.

While here, extract the compat_netbsd32_raid code into its own module,
too.

Welcome to 8.99.34

branches: 1.2.4;
implement 32-bit compat support for raidframe.

convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.

raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument

rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.

rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.

move several of the per-ioctl code blocks into separate functions.

add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.

add missing case for RAIDFRAME_GET_INFO50.

adjust raid tests to use the new .conf format, and add a case to
test the old method as well.

raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)

note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.

branches: 1.1.2; 1.1.18;
New files, in preparation for modularized version of raidframe driver.

(Driver changes to be committed on the weekend.)

Bump default value of WARNS for modules from 3 to 5, and
explicitly set WARNS for modules that fail with WARNS=5.

Also, turn on -Wno-missing-noreturn for clang for some files.

At the moment, among ~ 360 modules,
- 2 (lua and zfs) need WARNS=0
- 1 (solaris) needs WARNS=1
- 136 need WARNS=3 (mostly due to sign-compare)
- 4 need WARNS=4
- others can be compiled with WARNS=5

Discussed on tech-kern.

don't assume _LP64 == supports COMPAT_NETBSD32.

this is not true for alpha, ia64 and arm32 ports, and the first two
were not building because of it, and the latter would be missing
the oabi support (likely not a big deal, but still wrong.)

add a makefile fragment that tells you if it is supported and include
it where needed to define COMPAT_NETBSD32 when building the normal
kernel (ie, modules & rump.)


fixes alpha build, probably fixes ia64 build.


XXX: still leaves some netbsd32 code in rf_netbsdkintf.c, that should
be moved into some hooks, but first the configuration setup
needs to be moved into a common function the netbsd32 code can
call into, vs living in the switch case itself.

Remove some commented-out stuff accidentally left in the previous commit.

It's just comments, NFCI

Don't include the raidframe compat code in the main raid module, the
compat code lives in their own compat_raid_xx modules, which will now
be autoloaded if needed.

While here, extract the compat_netbsd32_raid code into its own module,
too.

Welcome to 8.99.34

implement 32-bit compat support for raidframe.

convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.

raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument

rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.

rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.

move several of the per-ioctl code blocks into separate functions.

add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.

add missing case for RAIDFRAME_GET_INFO50.

adjust raid tests to use the new .conf format, and add a case to
test the old method as well.

raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)

note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.

branches: 1.1.2; 1.1.18;
New files, in preparation for modularized version of raidframe driver.

(Driver changes to be committed on the weekend.)

implement 32-bit compat support for raidframe.

convert several raidframe ioctls to be bitsize idempotent so that
they work the same in 32 and 64 bit worlds, allowing netbsd32 to
configure and query raid properly. remove useless 'row' in a few
places. add COMPAT_80 and put the old ioctls there.

raidframeio.h:
RAIDFRAME_TEST_ACC
- remove, unused
RAIDFRAME_GET_COMPONENT_LABEL
- convert to label not pointer to label
RAIDFRAME_CHECK_RECON_STATUS_EXT
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT
- convert to progress info not pointer to info
RAIDFRAME_GET_INFO
- version entirely.
raidframevar.h:
- rf_recon_req{} has row, flags and raidPtr removed (they're
not a useful part of this interface.)
- RF_Config_s{} and RF_DeviceConfig_s{} have numRow/rows removed.
- RF_RaidDisk_s{} is re-ordered slightly to fix alignment
padding - the actual data was already OK.
- InstallSpareTable() loses row argument

rf_compat32.c has code for RF_Config_s{} in 32 bit mode, used
by RAIDFRAME_CONFIGURE and RAIDFRAME_GET_INFO32.

rf_compat80.c has code for rf_recon_req{}, RF_RaidDisk_s{} and
RF_DeviceConfig_s{} to handle RAIDFRAME_FAIL_DISK,
RAIDFRAME_GET_COMPONENT_LABEL, RAIDFRAME_CHECK_RECON_STATUS_EXT,
RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT,
RAIDFRAME_CHECK_COPYBACK_STATUS_EXT, RAIDFRAME_GET_INFO.

move several of the per-ioctl code blocks into separate functions.

add rf_recon_req_internal{} to replace old usage of global
rf_recon_req{} that had unused void * in the structure, ruining
it's 32/64 bit ABI.

add missing case for RAIDFRAME_GET_INFO50.

adjust raid tests to use the new .conf format, and add a case to
test the old method as well.

raidctl:
deal with lack of 'row' members in a couple of places.
fail request no longer takes row.
handle "START array" sections with just "numCol numSpare", ie
no "numRow" specified. for now, generate old-style configuration
but update raidctl.8 to specify the new style (keeping reference
to the old style.)

note that: RF_ComponentLabel_s::{row,num_rows} and
RF_SingleComponent_s::row are obsolete but not removed yet.

branches: 1.1.2; 1.1.18;
New files, in preparation for modularized version of raidframe driver.

(Driver changes to be committed on the weekend.)

branches: 1.1.2;
New files, in preparation for modularized version of raidframe driver.

(Driver changes to be committed on the weekend.)