Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

Import acpica-20211217

17 December 2021. Summary of changes for version 20211217:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

Hardware: Do not flush CPU cache when entering S4 and S5. According
to ACPI 6.4, Section 16.2, the CPU cache flushing is required on
entering to S1, S2, and S3, but the ACPICA code flushes the CPU
cache regardless of the sleep state. Blind cache flush on entering
S5 causes problems for TDX.

Avoid subobject buffer overflow when validating RSDP signature.
Since the Signature member is accessed through an ACPI_TABLE_HEADER,
the pointer to it is only to a 4-char array, and so trying to read
past the 4th character, as will be done when it is an RSDP, reads
beyond the bounds of the accessed member. Contributed by jrtc27.

Add support for PCC Opregion special context data. PCC Opregion
added in ACPIC 6.3 requires special context data similar to GPIO
and Generic Serial Bus as it needs to know the internal PCC buffer
and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM. Adds support for the special
context data needed by PCC Opregion. Submitted by Sudeep Holla

2) iASL Compiler/Disassembler and ACPICA tools:

iASL: Completed compiler support for the NHLT ACPI table.

iASL/NHLT table: Fixed a reported problem where a fault would occur
during disassembly of a "Linux-Specific" section if the "Specific
Data" part was not present.

iASL: Added full support (compiler and disassembler) for the AGDI
ACPI table. Contributed by: Ilkka Koskinen .

iASL: Added full support for the TDEL ACPI table.

iASL table compiler: FADT support updates:
1) Allow the 32-bit DSDT address to be zero.
2) Issue error if both the 32-bit and 64-bit DSDT addresses are zero.

iASL: Fix unaligned accesses to local cache allocations. Contributed
by jrtc27.

iASL: Open binary input files in binary mode, not text mode Affects
binary input AML files, as well as binary data table files, for
disassembly.

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.6.4; 1.1.1.6.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.2.2;

branches: 1.1.1.1.2; 1.1.1.1.4;

Import acpica-2022-03-31

Import acpica-20211217

17 December 2021. Summary of changes for version 20211217:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

Hardware: Do not flush CPU cache when entering S4 and S5. According
to ACPI 6.4, Section 16.2, the CPU cache flushing is required on
entering to S1, S2, and S3, but the ACPICA code flushes the CPU
cache regardless of the sleep state. Blind cache flush on entering
S5 causes problems for TDX.

Avoid subobject buffer overflow when validating RSDP signature.
Since the Signature member is accessed through an ACPI_TABLE_HEADER,
the pointer to it is only to a 4-char array, and so trying to read
past the 4th character, as will be done when it is an RSDP, reads
beyond the bounds of the accessed member. Contributed by jrtc27.

Add support for PCC Opregion special context data. PCC Opregion
added in ACPIC 6.3 requires special context data similar to GPIO
and Generic Serial Bus as it needs to know the internal PCC buffer
and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM. Adds support for the special
context data needed by PCC Opregion. Submitted by Sudeep Holla

2) iASL Compiler/Disassembler and ACPICA tools:

iASL: Completed compiler support for the NHLT ACPI table.

iASL/NHLT table: Fixed a reported problem where a fault would occur
during disassembly of a "Linux-Specific" section if the "Specific
Data" part was not present.

iASL: Added full support (compiler and disassembler) for the AGDI
ACPI table. Contributed by: Ilkka Koskinen .

iASL: Added full support for the TDEL ACPI table.

iASL table compiler: FADT support updates:
1) Allow the 32-bit DSDT address to be zero.
2) Issue error if both the 32-bit and 64-bit DSDT addresses are zero.

iASL: Fix unaligned accesses to local cache allocations. Contributed
by jrtc27.

iASL: Open binary input files in binary mode, not text mode Affects
binary input AML files, as well as binary data table files, for
disassembly.

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.6.4; 1.1.1.6.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.2.2;

branches: 1.1.1.1.2; 1.1.1.1.4;

Import acpica-20211217

17 December 2021. Summary of changes for version 20211217:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

Hardware: Do not flush CPU cache when entering S4 and S5. According
to ACPI 6.4, Section 16.2, the CPU cache flushing is required on
entering to S1, S2, and S3, but the ACPICA code flushes the CPU
cache regardless of the sleep state. Blind cache flush on entering
S5 causes problems for TDX.

Avoid subobject buffer overflow when validating RSDP signature.
Since the Signature member is accessed through an ACPI_TABLE_HEADER,
the pointer to it is only to a 4-char array, and so trying to read
past the 4th character, as will be done when it is an RSDP, reads
beyond the bounds of the accessed member. Contributed by jrtc27.

Add support for PCC Opregion special context data. PCC Opregion
added in ACPIC 6.3 requires special context data similar to GPIO
and Generic Serial Bus as it needs to know the internal PCC buffer
and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM. Adds support for the special
context data needed by PCC Opregion. Submitted by Sudeep Holla

2) iASL Compiler/Disassembler and ACPICA tools:

iASL: Completed compiler support for the NHLT ACPI table.

iASL/NHLT table: Fixed a reported problem where a fault would occur
during disassembly of a "Linux-Specific" section if the "Specific
Data" part was not present.

iASL: Added full support (compiler and disassembler) for the AGDI
ACPI table. Contributed by: Ilkka Koskinen .

iASL: Added full support for the TDEL ACPI table.

iASL table compiler: FADT support updates:
1) Allow the 32-bit DSDT address to be zero.
2) Issue error if both the 32-bit and 64-bit DSDT addresses are zero.

iASL: Fix unaligned accesses to local cache allocations. Contributed
by jrtc27.

iASL: Open binary input files in binary mode, not text mode Affects
binary input AML files, as well as binary data table files, for
disassembly.

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.6.4; 1.1.1.6.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.2.2;

branches: 1.1.1.1.2; 1.1.1.1.4;

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.6.4; 1.1.1.6.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.2.2;

branches: 1.1.1.1.2; 1.1.1.1.4;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.2.2;

branches: 1.1.1.1.2; 1.1.1.1.4;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.2.2;

branches: 1.1.1.1.2; 1.1.1.1.4;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.1.2; 1.1.1.1.4;

branches: 1.1.1.1.2;