Remove Token Ring support.

Remove isic(4). It is part of ISDN, which we are now retiring.

branches: 1.58.38; 1.58.40; 1.58.42;
Add malo@pcmcia.

branches: 1.57.28;
Remove esl(4)

branches: 1.56.22; 1.56.26; 1.56.28; 1.56.32;
Add support for AnyCom BlueCard.

Replace to Matthew Orgass's slhci(4).
http://mail-index.netbsd.org/tech-kern/2007/06/26/0001.html

branches: 1.54.6; 1.54.14; 1.54.16; 1.54.20;
Remove stale config(5) entries for unexistent wl(4).

Ok'd by matt@.

Make the inclusion of the spectrum24t firmware a config option, default
to enabled.

kill the "irq" llocator for pcmcia - this doesn't make sense because
irq mapping is done by the controller, and it is not used anywhere afaict

branches: 1.51.2;
update to bluetooth device attachment:

remove pseudo-device btdev(4) and inherent limitations

add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.

btdevctl(8) and its cache is updated to handle new semantics

etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf

branches: 1.50.2; 1.50.4;
make some bluetooth devices just devices, not interface attributes

Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.

The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.

Drivers for both PCMCIA and USB bluetooth controllers are included.

branches: 1.48.2; 1.48.4;
Comment out wl.

branches: 1.47.4; 1.47.6; 1.47.8; 1.47.10; 1.47.12;
merge ktrace-lwp.

branches: 1.46.12;
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.

My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.

While I'm at it, fix several bugs:

* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.

Probably needs more work, but it's a start.

Add a quick-and-dirty attachment for my MB87030-based PCMCIA SCSI controller.
XXX Don't even think about detaching it yet.

branches: 1.44.10;
Rename the audio "bus" attribute audiobus to avoid confusion with audio
device.

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

remove "stg", that I accidentally commited.
thanks, Tsutsui-san.

add pcmcia frontend for cs driver.

Add the esl driver.

branches: 1.39.2;
MII access routines for ASIX AX88190.

branches: 1.38.2;
divided into PCMCIA attachment and common code of wi.
since if_wi_ieee.h does not depend for pcmcia,
sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .

branches: 1.37.2;
whitespace police

Filename cleanup police (per discussion with Soren S. Jorvang):
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.

Renamed here:
i4b_isic_pcmcia.c -> isic_pcmcia.c
i4b_isic_pcmcia.h -> isic_pcmcia.h
i4b_avm_fritz_pcmcia.c -> isic_pcmcia_avm_fritz.c
i4b_elsa_isdnmc.c -> isic_pcmcia_elsa_isdnmc.c
i4b_elsa_mcall.c -> isic_pcmcia_elsa_mcall.c
i4b_sbspeedstar2.c -> isic_pcmcia_sbspeedstar2.c

Rename pcmcia_isic.[ch] to i4b_isic_pcmcia.[ch] to better fit in the
grand sheme of names.

Oops, `mii' attribute has to go onto the device decl.

ne at pcmcia needs dl10019, mii, mii_bitbang

Add support for another PCMCIA ISDN card: Sedlbauer speed star II.
While there fix two outdated comments.

Enable the imported ISDN4BSD based ISDN subsystem.

This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.

It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").

Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.

Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD.
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.

Though I only have an Aironet card, Cisco card should be expected to work.

Support WEP functions for awi driver.
arc4 implementation by Kalle Kaukonen has been added.
define "wlan" in files.
XXX: only awi depends on wlan for now.
Allow authentication for adhoc (IBSS) mode.
Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio.
FH cannot work without synchronization by beacons.
Align IP header for ethernet encapsulation (IFF_FLAG0) mode.
Print available access points for IFF_DEBUG.

branches: 1.28.2;
cleanup haeders.
add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
revision 1.2
date: 2000/04/17 22:58:15; author: imp; state: Exp; lines: +16 -1
Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
revision 1.4
date: 2000/05/29 19:58:10; author: guido; state: Exp; lines: +5 -2
Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.

One comment too much..

Add comments for a few drivers and the lines for the Tropic attachment.

New driver for Xircom CreditCard PCMCIA Ethernet. Replaces xe driver which
didn't work. Renamed to avoid clash with next68k network driver.

branches: 1.24.2;
Add esp_pcmcia. For the moment it's polled, since interrupts don't seem to be
working.

Preliminary support for 53c40x-based cards. Needs some more work.

add driver for raylink/aviator wireless 802.11 FH 2Mbps cards, currently only
tested with aviator 2.4

add mii attribute to xe. (Needed to make PHY attachment work.)

xe@pcmcia

Driver front-end for BayStack 650 PCMCIA 802.11 card.
Committed using the driver.

Add a placeholder for the ISA WaveLAN card

branches: 1.17.2; 1.17.4; 1.17.6;
Add a driver for the Megahertz Ethernet/Modem combo cards, e.g. XJEM3336.
This supplies an attachment of the `sm' and `com' drivers.

Thanks to Chuck Cranor for sifting through the Linux smc91c92_cs.c driver
to find the magic sequence that brings the Ethernet portion of the card
on-line!

fold long line and kill empty line at the end of file.

Blitz port of the FreeBSD wi* driver for the Lucent WaveLan IEEE
PCMCIA wireless LAN.
Original driver written by Bill Paul <wpaul@ctr.columbia.edu>

branches: 1.14.2; 1.14.4; 1.14.6;
Add Xircom Netwave driver from Michael Eriksson

add quirk support for cards which lie extensively about their CIS

Use `pcmciabus' as the PCMCIA attachment

Add code to detect a RealTek 8019 chip, and use the media selection
support if present.

Device driver for PCMCIA multi-port serial cards. Currently supports
the Socket Communications, Inc. dual-rs232 device.

Add pcmcia floppy front end.
XXX: We need to make an isa machine independent floppy driver...

Attach device `mbe' at bus `pcmcia'.

Remove "class" declarations, and add "devclass" declarations where
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.

Uncomment wdc.

Update for changes to config.

RCSid police

conditionalize so core pcmcia bus support is omitted if no pcmcia devices configured

Pull marc-pcmcia branch down from trunk.

branches: 1.1.2;
file files.pcmcia was initially added on branch marc-pcmcia.

Remove isic(4). It is part of ISDN, which we are now retiring.

branches: 1.58.38; 1.58.42;
Add malo@pcmcia.

branches: 1.57.28;
Remove esl(4)

branches: 1.56.22; 1.56.26; 1.56.28; 1.56.32;
Add support for AnyCom BlueCard.

Replace to Matthew Orgass's slhci(4).
http://mail-index.netbsd.org/tech-kern/2007/06/26/0001.html

branches: 1.54.6; 1.54.14; 1.54.16; 1.54.20;
Remove stale config(5) entries for unexistent wl(4).

Ok'd by matt@.

Make the inclusion of the spectrum24t firmware a config option, default
to enabled.

kill the "irq" llocator for pcmcia - this doesn't make sense because
irq mapping is done by the controller, and it is not used anywhere afaict

branches: 1.51.2;
update to bluetooth device attachment:

remove pseudo-device btdev(4) and inherent limitations

add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.

btdevctl(8) and its cache is updated to handle new semantics

etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf

branches: 1.50.2; 1.50.4;
make some bluetooth devices just devices, not interface attributes

Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.

The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.

Drivers for both PCMCIA and USB bluetooth controllers are included.

branches: 1.48.2; 1.48.4;
Comment out wl.

branches: 1.47.4; 1.47.6; 1.47.8; 1.47.10; 1.47.12;
merge ktrace-lwp.

branches: 1.46.12;
Split "xi" into a "xirc" frontend (similar to mhzc; it attaches two child
devices) and a "xi" backend.

My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.

While I'm at it, fix several bugs:

* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.

Probably needs more work, but it's a start.

Add a quick-and-dirty attachment for my MB87030-based PCMCIA SCSI controller.
XXX Don't even think about detaching it yet.

branches: 1.44.10;
Rename the audio "bus" attribute audiobus to avoid confusion with audio
device.

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

remove "stg", that I accidentally commited.
thanks, Tsutsui-san.

add pcmcia frontend for cs driver.

Add the esl driver.

branches: 1.39.2;
MII access routines for ASIX AX88190.

branches: 1.38.2;
divided into PCMCIA attachment and common code of wi.
since if_wi_ieee.h does not depend for pcmcia,
sys/dev/pcmcia/if_wi_ieee.h was moved to sys/dev/ic/wi_ieee.h .

branches: 1.37.2;
whitespace police

Filename cleanup police (per discussion with Soren S. Jorvang):
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.

Renamed here:
i4b_isic_pcmcia.c -> isic_pcmcia.c
i4b_isic_pcmcia.h -> isic_pcmcia.h
i4b_avm_fritz_pcmcia.c -> isic_pcmcia_avm_fritz.c
i4b_elsa_isdnmc.c -> isic_pcmcia_elsa_isdnmc.c
i4b_elsa_mcall.c -> isic_pcmcia_elsa_mcall.c
i4b_sbspeedstar2.c -> isic_pcmcia_sbspeedstar2.c

Rename pcmcia_isic.[ch] to i4b_isic_pcmcia.[ch] to better fit in the
grand sheme of names.

Oops, `mii' attribute has to go onto the device decl.

ne at pcmcia needs dl10019, mii, mii_bitbang

Add support for another PCMCIA ISDN card: Sedlbauer speed star II.
While there fix two outdated comments.

Enable the imported ISDN4BSD based ISDN subsystem.

This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.

It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").

Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.

Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD.
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.

Though I only have an Aironet card, Cisco card should be expected to work.

Support WEP functions for awi driver.
arc4 implementation by Kalle Kaukonen has been added.
define "wlan" in files.
XXX: only awi depends on wlan for now.
Allow authentication for adhoc (IBSS) mode.
Disable adhoc mode without bssid (mediaopt adhoc,flag0) for FH radio.
FH cannot work without synchronization by beacons.
Align IP header for ethernet encapsulation (IFF_FLAG0) mode.
Print available access points for IFF_DEBUG.

branches: 1.28.2;
cleanup haeders.
add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
revision 1.2
date: 2000/04/17 22:58:15; author: imp; state: Exp; lines: +16 -1
Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
revision 1.4
date: 2000/05/29 19:58:10; author: guido; state: Exp; lines: +5 -2
Fix a panic resulting from an obvious null pointer deref.
Apparently some other panics still exist in this driver, but with
this fix, it was at least possible to run the Nokia card at SANE 2000.

One comment too much..

Add comments for a few drivers and the lines for the Tropic attachment.

New driver for Xircom CreditCard PCMCIA Ethernet. Replaces xe driver which
didn't work. Renamed to avoid clash with next68k network driver.

branches: 1.24.2;
Add esp_pcmcia. For the moment it's polled, since interrupts don't seem to be
working.

Preliminary support for 53c40x-based cards. Needs some more work.

add driver for raylink/aviator wireless 802.11 FH 2Mbps cards, currently only
tested with aviator 2.4

add mii attribute to xe. (Needed to make PHY attachment work.)

xe@pcmcia

Driver front-end for BayStack 650 PCMCIA 802.11 card.
Committed using the driver.

Add a placeholder for the ISA WaveLAN card

branches: 1.17.2; 1.17.4; 1.17.6;
Add a driver for the Megahertz Ethernet/Modem combo cards, e.g. XJEM3336.
This supplies an attachment of the `sm' and `com' drivers.

Thanks to Chuck Cranor for sifting through the Linux smc91c92_cs.c driver
to find the magic sequence that brings the Ethernet portion of the card
on-line!

fold long line and kill empty line at the end of file.

Blitz port of the FreeBSD wi* driver for the Lucent WaveLan IEEE
PCMCIA wireless LAN.
Original driver written by Bill Paul <wpaul@ctr.columbia.edu>

branches: 1.14.2; 1.14.4; 1.14.6;
Add Xircom Netwave driver from Michael Eriksson

add quirk support for cards which lie extensively about their CIS

Use `pcmciabus' as the PCMCIA attachment

Add code to detect a RealTek 8019 chip, and use the media selection
support if present.

Device driver for PCMCIA multi-port serial cards. Currently supports
the Socket Communications, Inc. dual-rs232 device.

Add pcmcia floppy front end.
XXX: We need to make an isa machine independent floppy driver...

Attach device `mbe' at bus `pcmcia'.

Remove "class" declarations, and add "devclass" declarations where
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.

Uncomment wdc.

Update for changes to config.

RCSid police

conditionalize so core pcmcia bus support is omitted if no pcmcia devices configured

Pull marc-pcmcia branch down from trunk.

branches: 1.1.2;
file files.pcmcia was initially added on branch marc-pcmcia.