fix various typos in comments, docs and log messages.

Remove Token Ring support.

branches: 1.39.6;
Remove isic(4). It is part of ISDN, which we are now retiring.

branches: 1.38.162; 1.38.164; 1.38.166;
merge ktrace-lwp.

fix typo in previous, pointed out by Patrick Welche in private mail

add dependency on isadma for atppc attachments
add atppc_isadma.c for atppc@isapnp and atppc@ofisa, too

ISA PnP atppc(4) attachment
based loosely on aha ISA PnP attachment

aha and le uses isadma

branches: 1.33.6;
Overhaul of fmv(4) driver:
- Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183.
(XXX FMV-184 is not tested. It would require extra media-select functions..)
- Fix probe functions of fmv_isa so that FMV-181A/182A will also match.
Fixes port-i386/9476.

Rename the audio "bus" attribute audiobus to avoid confusion with audio
device.

Reduce the massive code duplication regarding joy(4). Split it into
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.

Add support for ITK IX1 PnP cards.
Thanks to Nick Hudson for testing.

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

add isapnp frontend for cs driver.

branches: 1.27.2; 1.27.4;
whitespace police

Filename cleanup police (per discussion with Soren S. Jorvang):
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.

Renamed here:
isapnp_isic.c -> isic_isapnp.c
i4b_ctx_s0P.c -> isic_isapnp_ctx_s0P.c
i4b_drn_ngo.c -> isic_isapnp_drn_ngo.c
i4b_dynalink.c -> isic_isapnp_dynalink.c
i4b_elsa_qs1i.c -> isic_isapnp_elsa_qs1i.c
i4b_siemens_isurf.c -> isic_isapnp_siemens_isurf.c
i4b_sws.c -> isic_isapnp_sws.c
i4b_tel_s0P.c -> isic_isapnp_tel_s0P.c

Enable the imported ISDN4BSD based ISDN subsystem.

This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.

It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").

Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.

ISAPnP front-end for the Aironet 802.11 cards. Note this is currently
untested.

branches: 1.23.8;
config(8) glue for Token-Ring and TROPIC drivers.

Add a mpu_isapnp attachment.

XXX Add a disgusting hack to make the CS sound chips work in PnP mode.
XXX Read about it in isapnp.c.

add adaptec aha attachment

Add code to detect a RealTek 8019 chip, and use the media selection
support if present.

Nit: space -> tab conversion. No functional change.

Add an isapnp frontend for the ess driver. It somewhat works
(sounds is made but one buffer is played continuously).

Add a hook that resets the bios configuration from the pnp devices
thus making them invisible to isa probes [from OpenBSD]

branches: 1.15.2;
Create a master list of pnp logical and compatibility device codes instead
of hard-coding it into each driver and use a centralized probe function.

adapt to LANCE driver split

Add WSS attachment for ISAPnP. Not tested yet.

Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.

Attach aic at isapnp.

Remove "class" declarations, and add "devclass" declarations where
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.

Add a PnP IDE frontend.

Adjust for config changes.

Add support NE2000 ISAPnp boards (only DEC DE305 supported now).

Add the GUS PnP driver.

branches: 1.5.2;
config.new => config

Add isapnp attachment for com driver

PCnet-PnP front-end driver for isapnp PCnet cards.

Add a frontend for the 3C509B.

Plug and Play support.

Remove Token Ring support.

Remove isic(4). It is part of ISDN, which we are now retiring.

branches: 1.38.162; 1.38.164; 1.38.166;
merge ktrace-lwp.

fix typo in previous, pointed out by Patrick Welche in private mail

add dependency on isadma for atppc attachments
add atppc_isadma.c for atppc@isapnp and atppc@ofisa, too

ISA PnP atppc(4) attachment
based loosely on aha ISA PnP attachment

aha and le uses isadma

branches: 1.33.6;
Overhaul of fmv(4) driver:
- Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183.
(XXX FMV-184 is not tested. It would require extra media-select functions..)
- Fix probe functions of fmv_isa so that FMV-181A/182A will also match.
Fixes port-i386/9476.

Rename the audio "bus" attribute audiobus to avoid confusion with audio
device.

Reduce the massive code duplication regarding joy(4). Split it into
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.

Add support for ITK IX1 PnP cards.
Thanks to Nick Hudson for testing.

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

add isapnp frontend for cs driver.

branches: 1.27.2; 1.27.4;
whitespace police

Filename cleanup police (per discussion with Soren S. Jorvang):
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.

Renamed here:
isapnp_isic.c -> isic_isapnp.c
i4b_ctx_s0P.c -> isic_isapnp_ctx_s0P.c
i4b_drn_ngo.c -> isic_isapnp_drn_ngo.c
i4b_dynalink.c -> isic_isapnp_dynalink.c
i4b_elsa_qs1i.c -> isic_isapnp_elsa_qs1i.c
i4b_siemens_isurf.c -> isic_isapnp_siemens_isurf.c
i4b_sws.c -> isic_isapnp_sws.c
i4b_tel_s0P.c -> isic_isapnp_tel_s0P.c

Enable the imported ISDN4BSD based ISDN subsystem.

This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.

It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").

Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.

ISAPnP front-end for the Aironet 802.11 cards. Note this is currently
untested.

branches: 1.23.8;
config(8) glue for Token-Ring and TROPIC drivers.

Add a mpu_isapnp attachment.

XXX Add a disgusting hack to make the CS sound chips work in PnP mode.
XXX Read about it in isapnp.c.

add adaptec aha attachment

Add code to detect a RealTek 8019 chip, and use the media selection
support if present.

Nit: space -> tab conversion. No functional change.

Add an isapnp frontend for the ess driver. It somewhat works
(sounds is made but one buffer is played continuously).

Add a hook that resets the bios configuration from the pnp devices
thus making them invisible to isa probes [from OpenBSD]

branches: 1.15.2;
Create a master list of pnp logical and compatibility device codes instead
of hard-coding it into each driver and use a centralized probe function.

adapt to LANCE driver split

Add WSS attachment for ISAPnP. Not tested yet.

Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.

Attach aic at isapnp.

Remove "class" declarations, and add "devclass" declarations where
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.

Add a PnP IDE frontend.

Adjust for config changes.

Add support NE2000 ISAPnp boards (only DEC DE305 supported now).

Add the GUS PnP driver.

branches: 1.5.2;
config.new => config

Add isapnp attachment for com driver

PCnet-PnP front-end driver for isapnp PCnet cards.

Add a frontend for the 3C509B.

Plug and Play support.

Remove isic(4). It is part of ISDN, which we are now retiring.

branches: 1.38.162; 1.38.166;
merge ktrace-lwp.

fix typo in previous, pointed out by Patrick Welche in private mail

add dependency on isadma for atppc attachments
add atppc_isadma.c for atppc@isapnp and atppc@ofisa, too

ISA PnP atppc(4) attachment
based loosely on aha ISA PnP attachment

aha and le uses isadma

branches: 1.33.6;
Overhaul of fmv(4) driver:
- Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183.
(XXX FMV-184 is not tested. It would require extra media-select functions..)
- Fix probe functions of fmv_isa so that FMV-181A/182A will also match.
Fixes port-i386/9476.

Rename the audio "bus" attribute audiobus to avoid confusion with audio
device.

Reduce the massive code duplication regarding joy(4). Split it into
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.

Add support for ITK IX1 PnP cards.
Thanks to Nick Hudson for testing.

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

add isapnp frontend for cs driver.

branches: 1.27.2; 1.27.4;
whitespace police

Filename cleanup police (per discussion with Soren S. Jorvang):
remove all (legacy) "i4b_" prefixes outside of sys/netisdn.
Prefix all card specific driver support files with the basename
of the driver bus attachement file.

Renamed here:
isapnp_isic.c -> isic_isapnp.c
i4b_ctx_s0P.c -> isic_isapnp_ctx_s0P.c
i4b_drn_ngo.c -> isic_isapnp_drn_ngo.c
i4b_dynalink.c -> isic_isapnp_dynalink.c
i4b_elsa_qs1i.c -> isic_isapnp_elsa_qs1i.c
i4b_siemens_isurf.c -> isic_isapnp_siemens_isurf.c
i4b_sws.c -> isic_isapnp_sws.c
i4b_tel_s0P.c -> isic_isapnp_tel_s0P.c

Enable the imported ISDN4BSD based ISDN subsystem.

This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/.

It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").

Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.

ISAPnP front-end for the Aironet 802.11 cards. Note this is currently
untested.

branches: 1.23.8;
config(8) glue for Token-Ring and TROPIC drivers.

Add a mpu_isapnp attachment.

XXX Add a disgusting hack to make the CS sound chips work in PnP mode.
XXX Read about it in isapnp.c.

add adaptec aha attachment

Add code to detect a RealTek 8019 chip, and use the media selection
support if present.

Nit: space -> tab conversion. No functional change.

Add an isapnp frontend for the ess driver. It somewhat works
(sounds is made but one buffer is played continuously).

Add a hook that resets the bios configuration from the pnp devices
thus making them invisible to isa probes [from OpenBSD]

branches: 1.15.2;
Create a master list of pnp logical and compatibility device codes instead
of hard-coding it into each driver and use a centralized probe function.

adapt to LANCE driver split

Add WSS attachment for ISAPnP. Not tested yet.

Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.

Attach aic at isapnp.

Remove "class" declarations, and add "devclass" declarations where
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.

Add a PnP IDE frontend.

Adjust for config changes.

Add support NE2000 ISAPnp boards (only DEC DE305 supported now).

Add the GUS PnP driver.

branches: 1.5.2;
config.new => config

Add isapnp attachment for com driver

PCnet-PnP front-end driver for isapnp PCnet cards.

Add a frontend for the 3C509B.

Plug and Play support.