lm(4): Add Nuvoton NCT6797D support.

Add Nuvoton NCT6799D support.

branches: 1.9.2;
Identify Nuvoton NCT6798D correctly. It seems that the bit width of NCT6796D
and newer devices' device ID is 13bit. The previous series was 12bits.

branches: 1.8.2;
Add NCT6796D. Some functions of NCT6796D is extended from NCT6795D,
but this commit doesn't support them yet.

branches: 1.7.2;
Add Watchdog timer implementation to wbsio(4). Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

Add wbsio(4) GPIO driver. Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

branches: 1.5.2; 1.5.4;
s/Id/NetBSD/. Pointed out by wiz!

Restore NetBSD RCS Id which was accidentally removed in rev. 1.2.

branches: 1.3.2;
- WBSIO_ID_W83627DHG and newer devices have 12bit device ID. So, change sioid
from 8bit to 16bit and check with it strictly.
- s/lm_match/nslm_match/
- split {wb,lm,def}_match() to XXX_match and XXX_attach().
- Rename lm_probe with lm_match and call {wb,nslm,def}_match() at the end of
the function to check strictly.
- NCT610[246]D is different from otehrs, so add new nct6102d_sensors[] table.
- Register offsets of vendor ID and chip id of NCT610[246]D are different
from others. When it failed reading vendor ID or chip ID, fallback to
NCT610[246]D's register offsets.
- Add debug messages.

lm(4): Add suport for NCT5174D, NCT6775F, NCT6779D and NCT679[1235]D.
wbsio(4): Add support for NCT6795D.

Add Winbond W83627DHG-P, W83627SF, W83627UHG, W83667HGB, W83687THF, W83697UG,
Nuvoton NCT5104D, NCT6775, NCT6779, NCT6791, NCT6792 and NCT6793.

Add Nuvoton NCT6799D support.

Identify Nuvoton NCT6798D correctly. It seems that the bit width of NCT6796D
and newer devices' device ID is 13bit. The previous series was 12bits.

branches: 1.8.2;
Add NCT6796D. Some functions of NCT6796D is extended from NCT6795D,
but this commit doesn't support them yet.

branches: 1.7.2;
Add Watchdog timer implementation to wbsio(4). Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

Add wbsio(4) GPIO driver. Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

branches: 1.5.2; 1.5.4;
s/Id/NetBSD/. Pointed out by wiz!

Restore NetBSD RCS Id which was accidentally removed in rev. 1.2.

branches: 1.3.2;
- WBSIO_ID_W83627DHG and newer devices have 12bit device ID. So, change sioid
from 8bit to 16bit and check with it strictly.
- s/lm_match/nslm_match/
- split {wb,lm,def}_match() to XXX_match and XXX_attach().
- Rename lm_probe with lm_match and call {wb,nslm,def}_match() at the end of
the function to check strictly.
- NCT610[246]D is different from otehrs, so add new nct6102d_sensors[] table.
- Register offsets of vendor ID and chip id of NCT610[246]D are different
from others. When it failed reading vendor ID or chip ID, fallback to
NCT610[246]D's register offsets.
- Add debug messages.

lm(4): Add suport for NCT5174D, NCT6775F, NCT6779D and NCT679[1235]D.
wbsio(4): Add support for NCT6795D.

Add Winbond W83627DHG-P, W83627SF, W83627UHG, W83667HGB, W83687THF, W83697UG,
Nuvoton NCT5104D, NCT6775, NCT6779, NCT6791, NCT6792 and NCT6793.

Identify Nuvoton NCT6798D correctly. It seems that the bit width of NCT6796D
and newer devices' device ID is 13bit. The previous series was 12bits.

Add NCT6796D. Some functions of NCT6796D is extended from NCT6795D,
but this commit doesn't support them yet.

branches: 1.7.2;
Add Watchdog timer implementation to wbsio(4). Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

Add wbsio(4) GPIO driver. Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

branches: 1.5.2; 1.5.4;
s/Id/NetBSD/. Pointed out by wiz!

Restore NetBSD RCS Id which was accidentally removed in rev. 1.2.

branches: 1.3.2;
- WBSIO_ID_W83627DHG and newer devices have 12bit device ID. So, change sioid
from 8bit to 16bit and check with it strictly.
- s/lm_match/nslm_match/
- split {wb,lm,def}_match() to XXX_match and XXX_attach().
- Rename lm_probe with lm_match and call {wb,nslm,def}_match() at the end of
the function to check strictly.
- NCT610[246]D is different from otehrs, so add new nct6102d_sensors[] table.
- Register offsets of vendor ID and chip id of NCT610[246]D are different
from others. When it failed reading vendor ID or chip ID, fallback to
NCT610[246]D's register offsets.
- Add debug messages.

lm(4): Add suport for NCT5174D, NCT6775F, NCT6779D and NCT679[1235]D.
wbsio(4): Add support for NCT6795D.

Add Winbond W83627DHG-P, W83627SF, W83627UHG, W83667HGB, W83687THF, W83697UG,
Nuvoton NCT5104D, NCT6775, NCT6779, NCT6791, NCT6792 and NCT6793.

Add NCT6796D. Some functions of NCT6796D is extended from NCT6795D,
but this commit doesn't support them yet.

branches: 1.7.2;
Add Watchdog timer implementation to wbsio(4). Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

Add wbsio(4) GPIO driver. Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

branches: 1.5.2; 1.5.4;
s/Id/NetBSD/. Pointed out by wiz!

Restore NetBSD RCS Id which was accidentally removed in rev. 1.2.

branches: 1.3.2;
- WBSIO_ID_W83627DHG and newer devices have 12bit device ID. So, change sioid
from 8bit to 16bit and check with it strictly.
- s/lm_match/nslm_match/
- split {wb,lm,def}_match() to XXX_match and XXX_attach().
- Rename lm_probe with lm_match and call {wb,nslm,def}_match() at the end of
the function to check strictly.
- NCT610[246]D is different from otehrs, so add new nct6102d_sensors[] table.
- Register offsets of vendor ID and chip id of NCT610[246]D are different
from others. When it failed reading vendor ID or chip ID, fallback to
NCT610[246]D's register offsets.
- Add debug messages.

lm(4): Add suport for NCT5174D, NCT6775F, NCT6779D and NCT679[1235]D.
wbsio(4): Add support for NCT6795D.

Add Winbond W83627DHG-P, W83627SF, W83627UHG, W83667HGB, W83687THF, W83697UG,
Nuvoton NCT5104D, NCT6775, NCT6779, NCT6791, NCT6792 and NCT6793.

Add Watchdog timer implementation to wbsio(4). Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

Add wbsio(4) GPIO driver. Implemeted by s-yamaguchi@IIJ, reviewed by msaitoh@n.o.

I just commit by proxy.

branches: 1.5.2; 1.5.4;
s/Id/NetBSD/. Pointed out by wiz!

Restore NetBSD RCS Id which was accidentally removed in rev. 1.2.

branches: 1.3.2;
- WBSIO_ID_W83627DHG and newer devices have 12bit device ID. So, change sioid
from 8bit to 16bit and check with it strictly.
- s/lm_match/nslm_match/
- split {wb,lm,def}_match() to XXX_match and XXX_attach().
- Rename lm_probe with lm_match and call {wb,nslm,def}_match() at the end of
the function to check strictly.
- NCT610[246]D is different from otehrs, so add new nct6102d_sensors[] table.
- Register offsets of vendor ID and chip id of NCT610[246]D are different
from others. When it failed reading vendor ID or chip ID, fallback to
NCT610[246]D's register offsets.
- Add debug messages.

lm(4): Add suport for NCT5174D, NCT6775F, NCT6779D and NCT679[1235]D.
wbsio(4): Add support for NCT6795D.

Add Winbond W83627DHG-P, W83627SF, W83627UHG, W83667HGB, W83687THF, W83697UG,
Nuvoton NCT5104D, NCT6775, NCT6779, NCT6791, NCT6792 and NCT6793.