move ata_queue_alloc(1) and ata_queue_free() calls to ata_channel_init()
and ata_channel_destroy() respectively, to make attachment code simpler,
and to make it easier to spot special queue manipulation like cmdide(4)

on topic of PR kern/52606

Merge support for SATA NCQ (Native Command Queueing) from jdolecek-ncq branch

ATA subsystem was changed to support several outstanding commands, and use
NCQ xfers if supported by both the controller and the disk, including NCQ
error recovery. Set NCQ high priority for BPRIO_TIMECRITICAL xfers
if supported. Added FUA support.

Done some work towards MP-safe, all ATA code tsleep()/wakeup() replaced
by condvars, and switched most code from spl* to mutexes (separate
wd(4) and ata channel lock).

Introduced new option WD_CHAOS_MONKEY to facilitate testing of error
handling, fixed several uncovered issues. Also fixed several problems
with kernel dump to wd(4) disk.

Tested with ahcisata(4), mvsata(4), siisata(4), piixide(4) on amd64,
with and without port multiplier, both disk and ATAPI devices; other
drivers and archs mechanically adjusted and compile-tested. NCQ is
supported for ahcisata(4) and siisata(4) for any controller, for
mvsata(4) only Gen IIe ones for now. Also enabled ATAPI support in
mvsata(4).

Thanks to Matt Thomas for initial ATA infrastructure patch, and
Jonathan A.Kollasch for siisata(4) NCQ changes and general testing.

Also fixes PR kern/43169 (wd(4)); and PR kern/11811, PR kern/47041,
PR kern/51979 (kernel dump)

branches: 1.18.28;
Apply back changes that were reverted on Jul 24 and Jul 26 (general ata/wdc
cleanup and SATA PMP support), now that I'm back to fix the fallouts.

Revert, with intention of restoring in a less invasive way, the SATA Port
Multiplier code.

ok christos@

Revert dsl@'s changes of Sun, 15 Jul 2012 10:55:35 +0000 and
Sun, 15 Jul 2012 10:56:50 +0000, excepting the kernel version bump.
First step in reverting regressions to ata(4) subsystem during the addition of
port multiplier support.

Some namespace protection (and add greppablity).
Prefix the DRIVE_ and DRIVET_ constants from atavar.h with ATA_.
Don't use an enum for drive_type - you don't know how big it will be.
Move driver_type to avoid implicit structure padding (esp on arm).
This change is purely lexical and mechanical.

Update to 6.99.9 - this wasn't done when the SATA PMP changes
were made - I'm sure they warranted a bump.

Add sata Port MultiPlier (PMP) support to the ata bus layer,
as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()

propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).

Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed

branches: 1.13.4;
Cleanup my copyright notice.

branches: 1.12.2; 1.12.4;
Don't pull in the whole uvm(9) API to access only PAGE_SIZE and
some other constants. These are provided by sys/param.h now.

branches: 1.11.4;
Change about 4500 of the K&R function definitions to ANSI ones.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)

branches: 1.10.4; 1.10.12; 1.10.18;
Split device_t and softc for ATA devices, as well as wd(4). Other
cosmetic changes where appropriate.

branches: 1.9.12; 1.9.16;
machine/{bus,cpu,intr}.h -> sys/{bus,cpu,intr}.h

branches: 1.8.6; 1.8.8; 1.8.12;
Merge some of the less invasive changes from the vmlocking branch:

- kthread, callout, devsw API changes
- select()/poll() improvements
- miscellaneous MT safety improvements

branches: 1.7.2; 1.7.4;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.6.2; 1.6.4;
Fix bus_dmamap_sync() usage.
This should not be a problem since BUS_DMASYNC_POSTWRITE is probably a no-op.

branches: 1.5.2;
__unused removal on arguments; approved by core.

more __unused; also, ew, K&R decls.

Change Id to NetBSD

Use ATA timing, instead of busmaster wait, for adding waits.
Use default wait value 0x01.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Workbit NinjaATA-32 busmastering PIO IDE controller driver (njata)

This driver supports NinjaATA-32Bi and NPATA-32 chips,
which are used for CardBus ATA interface cards and
CardBus CompactFlash adapters.