Regen

Merge the [pgoyette-compat] branch

Regen

branches: 1.71.2;
Revert vadvise(2) removal

This system call was used in legacy Lisp code, that was inherited to modern
age and still compiled against supported compat layers (e.g. in clisp,
oaklisp, Franz Lisp).

It used to instruct the kernel about paging policy (G/C aware, flush etc).

Newly compiled code (assuming that it will detect vadvise()) will use the
libc stub for vadvise(). The headers for this interface are gone.

vadvise(2) could be marked as COMPAT_80, but as long as we support ultrix,
sunos or aout68k ABI, don't bother with this.

Requested by <mrg>

compat/ultrix: Drop SYS_vadvise

The (o)vadvise syscall is dummy since the beginning of NetBSD.

Sponsored by <The NetBSD Foundation>

compat/ultrix: Drop SYS_sbrk

sbrk - change data segment size

This syscall is dummy since the inception of the project.

Sponsored by <The NetBSD Foundation>

compat ultrix: Drop the sstk(2) syscall

sstk(2) has never been implemented by the NetBSD kernel.

Sponsored by <The NetBSD Foundation>

regen

branches: 1.66.4;
regen

branches: 1.65.2;
regen

branches: 1.64.2;
regen

regen

branches: 1.62.6;
Regen for dup/dup2/dup3 argument types fix.

branches: 1.61.10; 1.61.20; 1.61.24;
regen:
- remove nfssvc / fs_nfs.h / #ifdef NFS
- make getfh unconditional

branches: 1.60.2;
Regen (new makesyscalls.sh)

Regenerate files after updating syscalls.master for compat_ultrix:

Adapt to the state after the recent time_t change.
Type changes:
timeval -> timeval50
itimerval -> itimerval50
rusage -> rusage50
and use of the compat_50 calls where appropriate.
Untested, but at least it builds.

Discussed with christos@

Regen to prove I didn't screw up the conversion: purely RCSID changes.

regen

Regen.

branches: 1.55.2; 1.55.4;
regen from syscalls.master r1.46

branches: 1.54.2; 1.54.4; 1.54.6;
Regen.

branches: 1.53.6; 1.53.8;
regen

branches: 1.52.16; 1.52.24; 1.52.28;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.51.2;
Merge newlock2 to head.

branches: 1.50.4;
regen (sys_getfh -> compat_30_sys_getfh)

regenerate.

branches: 1.48.4; 1.48.8; 1.48.16;
merge ktrace-lwp.

branches: 1.47.4;
regen

regen

branches: 1.45.2; 1.45.10; 1.45.12;
Regen for correct RCS ID.

Regen: Merge the nathanw_sa branch.

add RCSIDs (including regeneration of files as appropriate)

branches: 1.42.2;
use _KERNEL_OPT.

branches: 1.41.2;
egen; getpid(2) is MP-safe.

Regen; add sy_flags.

Regen.

change the type of *syscallnames[] array to 'const char * const foo[]'

update for changed makesyscalls.master

branches: 1.36.2;
regen

Regen.

branches: 1.34.2; 1.34.4;
Regen

regen

Regen

regen

regen

Regen: defopt NFSSERVER

Regen: makesyscalls.sh changed.

Regen; syscalls.master and makesyscalls.sh changed.

Regen: use POSIX semantics for chown()/fchown().

Regen.

Regen.

Regen: back out RCD ID related changes.

regened with RCSIDs in place

Regen.

Regen: Use compat_12_sys_swapon().

Emulate RISC Ultrix cacheflush() and cachectl() syscalls on mips.

Add changes to make vic-2.8 Ultrix binaries work on NetBSD with COMPAT_ULTRIX:
* Add IPmulticast setsockopt emulation.
* Add Ultrix shmsys emulation (untested).
* tidy up use of stackgap.

Syscalls.master changed, regen. (NFSCLIENT -> NFS)

branches: 1.16.2;
Regen.

Regen.

branches: 1.14.4;
Add '/emul/ultrix' pathname processing to Ultrix emulation, and move
Ultrix syscalls that require that processing out of ultrix_misc.c
to ultrix_pathname.c.

Add emulation of ultrix mount(2). Sufficient to NFS-mount filesystems
using a NetBSD kernel in an ultrix root filesystem.

Move wait emulation to the old (v7) wait syscall number, as that's
what the Ultrix ufs_mount binary uses.

Add emulation of Ultrix select: before calling native sys_select(),
limit the number of FDs to select on to the maximum supported by NetBSD --
which is as many FDs as the emul_ultrix process can have open, anyway.

Add emulation of Ultrix getmnt(2) in ultrix_fs.c

Add partial emulation of Ultrix tty ioctl()s in ultrix_ioctl.c, derived
from compat/sunos/sunos_ioctl.c. Ultrix libc's ``isatty()'' now works
in compat_emul processes.

Reran makesyscalls.sh.

makesyscalls.sh changed

Clear up name conflict between Ultrix syscall 103 and 139.

- added struct emul to all emulations.
- removed all setup functions.
- added copyargs() functions where needed.

added sigreturn

changes for new sysent structure (from J. Stone)

add ultrix_{get,set}sysinfo() from Arne H Juul <arnej@dsl.unit.no>

branches: 1.4.2;
fix a botch, and gen syscall files

update to reflect compat_ultrix syscalls.master

much works but untested w/new fs. expect more tomorrow

first swipe at ultrix compat. expect many bug fixes. very related to compat/sunos

Revert vadvise(2) removal

This system call was used in legacy Lisp code, that was inherited to modern
age and still compiled against supported compat layers (e.g. in clisp,
oaklisp, Franz Lisp).

It used to instruct the kernel about paging policy (G/C aware, flush etc).

Newly compiled code (assuming that it will detect vadvise()) will use the
libc stub for vadvise(). The headers for this interface are gone.

vadvise(2) could be marked as COMPAT_80, but as long as we support ultrix,
sunos or aout68k ABI, don't bother with this.

Requested by <mrg>

compat/ultrix: Drop SYS_vadvise

The (o)vadvise syscall is dummy since the beginning of NetBSD.

Sponsored by <The NetBSD Foundation>

compat/ultrix: Drop SYS_sbrk

sbrk - change data segment size

This syscall is dummy since the inception of the project.

Sponsored by <The NetBSD Foundation>

compat ultrix: Drop the sstk(2) syscall

sstk(2) has never been implemented by the NetBSD kernel.

Sponsored by <The NetBSD Foundation>

regen

branches: 1.66.4;
regen

branches: 1.65.2;
regen

branches: 1.64.2;
regen

regen

branches: 1.62.6;
Regen for dup/dup2/dup3 argument types fix.

branches: 1.61.10; 1.61.20; 1.61.24;
regen:
- remove nfssvc / fs_nfs.h / #ifdef NFS
- make getfh unconditional

branches: 1.60.2;
Regen (new makesyscalls.sh)

Regenerate files after updating syscalls.master for compat_ultrix:

Adapt to the state after the recent time_t change.
Type changes:
timeval -> timeval50
itimerval -> itimerval50
rusage -> rusage50
and use of the compat_50 calls where appropriate.
Untested, but at least it builds.

Discussed with christos@

Regen to prove I didn't screw up the conversion: purely RCSID changes.

regen

Regen.

branches: 1.55.2; 1.55.4;
regen from syscalls.master r1.46

branches: 1.54.2; 1.54.4; 1.54.6;
Regen.

branches: 1.53.6; 1.53.8;
regen

branches: 1.52.16; 1.52.24; 1.52.28;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.51.2;
Merge newlock2 to head.

branches: 1.50.4;
regen (sys_getfh -> compat_30_sys_getfh)

regenerate.

branches: 1.48.4; 1.48.8; 1.48.16;
merge ktrace-lwp.

branches: 1.47.4;
regen

regen

branches: 1.45.2; 1.45.10; 1.45.12;
Regen for correct RCS ID.

Regen: Merge the nathanw_sa branch.

add RCSIDs (including regeneration of files as appropriate)

branches: 1.42.2;
use _KERNEL_OPT.

branches: 1.41.2;
egen; getpid(2) is MP-safe.

Regen; add sy_flags.

Regen.

change the type of *syscallnames[] array to 'const char * const foo[]'

update for changed makesyscalls.master

branches: 1.36.2;
regen

Regen.

branches: 1.34.2; 1.34.4;
Regen

regen

Regen

regen

regen

Regen: defopt NFSSERVER

Regen: makesyscalls.sh changed.

Regen; syscalls.master and makesyscalls.sh changed.

Regen: use POSIX semantics for chown()/fchown().

Regen.

Regen.

Regen: back out RCD ID related changes.

regened with RCSIDs in place

Regen.

Regen: Use compat_12_sys_swapon().

Emulate RISC Ultrix cacheflush() and cachectl() syscalls on mips.

Add changes to make vic-2.8 Ultrix binaries work on NetBSD with COMPAT_ULTRIX:
* Add IPmulticast setsockopt emulation.
* Add Ultrix shmsys emulation (untested).
* tidy up use of stackgap.

Syscalls.master changed, regen. (NFSCLIENT -> NFS)

branches: 1.16.2;
Regen.

Regen.

branches: 1.14.4;
Add '/emul/ultrix' pathname processing to Ultrix emulation, and move
Ultrix syscalls that require that processing out of ultrix_misc.c
to ultrix_pathname.c.

Add emulation of ultrix mount(2). Sufficient to NFS-mount filesystems
using a NetBSD kernel in an ultrix root filesystem.

Move wait emulation to the old (v7) wait syscall number, as that's
what the Ultrix ufs_mount binary uses.

Add emulation of Ultrix select: before calling native sys_select(),
limit the number of FDs to select on to the maximum supported by NetBSD --
which is as many FDs as the emul_ultrix process can have open, anyway.

Add emulation of Ultrix getmnt(2) in ultrix_fs.c

Add partial emulation of Ultrix tty ioctl()s in ultrix_ioctl.c, derived
from compat/sunos/sunos_ioctl.c. Ultrix libc's ``isatty()'' now works
in compat_emul processes.

Reran makesyscalls.sh.

makesyscalls.sh changed

Clear up name conflict between Ultrix syscall 103 and 139.

- added struct emul to all emulations.
- removed all setup functions.
- added copyargs() functions where needed.

added sigreturn

changes for new sysent structure (from J. Stone)

add ultrix_{get,set}sysinfo() from Arne H Juul <arnej@dsl.unit.no>

branches: 1.4.2;
fix a botch, and gen syscall files

update to reflect compat_ultrix syscalls.master

much works but untested w/new fs. expect more tomorrow

first swipe at ultrix compat. expect many bug fixes. very related to compat/sunos

regen

regen

branches: 1.65.2;
regen

branches: 1.64.2;
regen

regen

branches: 1.62.6;
Regen for dup/dup2/dup3 argument types fix.

branches: 1.61.10; 1.61.20; 1.61.24;
regen:
- remove nfssvc / fs_nfs.h / #ifdef NFS
- make getfh unconditional

branches: 1.60.2;
Regen (new makesyscalls.sh)

Regenerate files after updating syscalls.master for compat_ultrix:

Adapt to the state after the recent time_t change.
Type changes:
timeval -> timeval50
itimerval -> itimerval50
rusage -> rusage50
and use of the compat_50 calls where appropriate.
Untested, but at least it builds.

Discussed with christos@

Regen to prove I didn't screw up the conversion: purely RCSID changes.

regen

Regen.

branches: 1.55.2; 1.55.4;
regen from syscalls.master r1.46

branches: 1.54.2; 1.54.4; 1.54.6;
Regen.

branches: 1.53.6; 1.53.8;
regen

branches: 1.52.16; 1.52.24; 1.52.28;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.51.2;
Merge newlock2 to head.

branches: 1.50.4;
regen (sys_getfh -> compat_30_sys_getfh)

regenerate.

branches: 1.48.4; 1.48.8; 1.48.16;
merge ktrace-lwp.

branches: 1.47.4;
regen

regen

branches: 1.45.2; 1.45.10; 1.45.12;
Regen for correct RCS ID.

Regen: Merge the nathanw_sa branch.

add RCSIDs (including regeneration of files as appropriate)

branches: 1.42.2;
use _KERNEL_OPT.

branches: 1.41.2;
egen; getpid(2) is MP-safe.

Regen; add sy_flags.

Regen.

change the type of *syscallnames[] array to 'const char * const foo[]'

update for changed makesyscalls.master

branches: 1.36.2;
regen

Regen.

branches: 1.34.2; 1.34.4;
Regen

regen

Regen

regen

regen

Regen: defopt NFSSERVER

Regen: makesyscalls.sh changed.

Regen; syscalls.master and makesyscalls.sh changed.

Regen: use POSIX semantics for chown()/fchown().

Regen.

Regen.

Regen: back out RCD ID related changes.

regened with RCSIDs in place

Regen.

Regen: Use compat_12_sys_swapon().

Emulate RISC Ultrix cacheflush() and cachectl() syscalls on mips.

Add changes to make vic-2.8 Ultrix binaries work on NetBSD with COMPAT_ULTRIX:
* Add IPmulticast setsockopt emulation.
* Add Ultrix shmsys emulation (untested).
* tidy up use of stackgap.

Syscalls.master changed, regen. (NFSCLIENT -> NFS)

branches: 1.16.2;
Regen.

Regen.

branches: 1.14.4;
Add '/emul/ultrix' pathname processing to Ultrix emulation, and move
Ultrix syscalls that require that processing out of ultrix_misc.c
to ultrix_pathname.c.

Add emulation of ultrix mount(2). Sufficient to NFS-mount filesystems
using a NetBSD kernel in an ultrix root filesystem.

Move wait emulation to the old (v7) wait syscall number, as that's
what the Ultrix ufs_mount binary uses.

Add emulation of Ultrix select: before calling native sys_select(),
limit the number of FDs to select on to the maximum supported by NetBSD --
which is as many FDs as the emul_ultrix process can have open, anyway.

Add emulation of Ultrix getmnt(2) in ultrix_fs.c

Add partial emulation of Ultrix tty ioctl()s in ultrix_ioctl.c, derived
from compat/sunos/sunos_ioctl.c. Ultrix libc's ``isatty()'' now works
in compat_emul processes.

Reran makesyscalls.sh.

makesyscalls.sh changed

Clear up name conflict between Ultrix syscall 103 and 139.

- added struct emul to all emulations.
- removed all setup functions.
- added copyargs() functions where needed.

added sigreturn

changes for new sysent structure (from J. Stone)

add ultrix_{get,set}sysinfo() from Arne H Juul <arnej@dsl.unit.no>

branches: 1.4.2;
fix a botch, and gen syscall files

update to reflect compat_ultrix syscalls.master

much works but untested w/new fs. expect more tomorrow

first swipe at ultrix compat. expect many bug fixes. very related to compat/sunos

regen

regen

regen

regen

branches: 1.62.6;
Regen for dup/dup2/dup3 argument types fix.

branches: 1.61.10; 1.61.20; 1.61.24;
regen:
- remove nfssvc / fs_nfs.h / #ifdef NFS
- make getfh unconditional

branches: 1.60.2;
Regen (new makesyscalls.sh)

Regenerate files after updating syscalls.master for compat_ultrix:

Adapt to the state after the recent time_t change.
Type changes:
timeval -> timeval50
itimerval -> itimerval50
rusage -> rusage50
and use of the compat_50 calls where appropriate.
Untested, but at least it builds.

Discussed with christos@

Regen to prove I didn't screw up the conversion: purely RCSID changes.

regen

Regen.

branches: 1.55.2; 1.55.4;
regen from syscalls.master r1.46

branches: 1.54.2; 1.54.4; 1.54.6;
Regen.

branches: 1.53.6; 1.53.8;
regen

branches: 1.52.16; 1.52.24; 1.52.28;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.51.2;
Merge newlock2 to head.

branches: 1.50.4;
regen (sys_getfh -> compat_30_sys_getfh)

regenerate.

branches: 1.48.4; 1.48.8; 1.48.16;
merge ktrace-lwp.

branches: 1.47.4;
regen

regen

branches: 1.45.2; 1.45.10; 1.45.12;
Regen for correct RCS ID.

Regen: Merge the nathanw_sa branch.

add RCSIDs (including regeneration of files as appropriate)

branches: 1.42.2;
use _KERNEL_OPT.

branches: 1.41.2;
egen; getpid(2) is MP-safe.

Regen; add sy_flags.

Regen.

change the type of *syscallnames[] array to 'const char * const foo[]'

update for changed makesyscalls.master

branches: 1.36.2;
regen

Regen.

branches: 1.34.2; 1.34.4;
Regen

regen

Regen

regen

regen

Regen: defopt NFSSERVER

Regen: makesyscalls.sh changed.

Regen; syscalls.master and makesyscalls.sh changed.

Regen: use POSIX semantics for chown()/fchown().

Regen.

Regen.

Regen: back out RCD ID related changes.

regened with RCSIDs in place

Regen.

Regen: Use compat_12_sys_swapon().

Emulate RISC Ultrix cacheflush() and cachectl() syscalls on mips.

Add changes to make vic-2.8 Ultrix binaries work on NetBSD with COMPAT_ULTRIX:
* Add IPmulticast setsockopt emulation.
* Add Ultrix shmsys emulation (untested).
* tidy up use of stackgap.

Syscalls.master changed, regen. (NFSCLIENT -> NFS)

branches: 1.16.2;
Regen.

Regen.

branches: 1.14.4;
Add '/emul/ultrix' pathname processing to Ultrix emulation, and move
Ultrix syscalls that require that processing out of ultrix_misc.c
to ultrix_pathname.c.

Add emulation of ultrix mount(2). Sufficient to NFS-mount filesystems
using a NetBSD kernel in an ultrix root filesystem.

Move wait emulation to the old (v7) wait syscall number, as that's
what the Ultrix ufs_mount binary uses.

Add emulation of Ultrix select: before calling native sys_select(),
limit the number of FDs to select on to the maximum supported by NetBSD --
which is as many FDs as the emul_ultrix process can have open, anyway.

Add emulation of Ultrix getmnt(2) in ultrix_fs.c

Add partial emulation of Ultrix tty ioctl()s in ultrix_ioctl.c, derived
from compat/sunos/sunos_ioctl.c. Ultrix libc's ``isatty()'' now works
in compat_emul processes.

Reran makesyscalls.sh.

makesyscalls.sh changed

Clear up name conflict between Ultrix syscall 103 and 139.

- added struct emul to all emulations.
- removed all setup functions.
- added copyargs() functions where needed.

added sigreturn

changes for new sysent structure (from J. Stone)

add ultrix_{get,set}sysinfo() from Arne H Juul <arnej@dsl.unit.no>

branches: 1.4.2;
fix a botch, and gen syscall files

update to reflect compat_ultrix syscalls.master

much works but untested w/new fs. expect more tomorrow

first swipe at ultrix compat. expect many bug fixes. very related to compat/sunos

regen

regen

regen

branches: 1.62.6;
Regen for dup/dup2/dup3 argument types fix.

branches: 1.61.10; 1.61.20; 1.61.24;
regen:
- remove nfssvc / fs_nfs.h / #ifdef NFS
- make getfh unconditional

branches: 1.60.2;
Regen (new makesyscalls.sh)

Regenerate files after updating syscalls.master for compat_ultrix:

Adapt to the state after the recent time_t change.
Type changes:
timeval -> timeval50
itimerval -> itimerval50
rusage -> rusage50
and use of the compat_50 calls where appropriate.
Untested, but at least it builds.

Discussed with christos@

Regen to prove I didn't screw up the conversion: purely RCSID changes.

regen

Regen.

branches: 1.55.2; 1.55.4;
regen from syscalls.master r1.46

branches: 1.54.2; 1.54.4; 1.54.6;
Regen.

branches: 1.53.6; 1.53.8;
regen

branches: 1.52.16; 1.52.24; 1.52.28;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.51.2;
Merge newlock2 to head.

branches: 1.50.4;
regen (sys_getfh -> compat_30_sys_getfh)

regenerate.

branches: 1.48.4; 1.48.8; 1.48.16;
merge ktrace-lwp.

branches: 1.47.4;
regen

regen

branches: 1.45.2; 1.45.10; 1.45.12;
Regen for correct RCS ID.

Regen: Merge the nathanw_sa branch.

add RCSIDs (including regeneration of files as appropriate)

branches: 1.42.2;
use _KERNEL_OPT.

branches: 1.41.2;
egen; getpid(2) is MP-safe.

Regen; add sy_flags.

Regen.

change the type of *syscallnames[] array to 'const char * const foo[]'

update for changed makesyscalls.master

branches: 1.36.2;
regen

Regen.

branches: 1.34.2; 1.34.4;
Regen

regen

Regen

regen

regen

Regen: defopt NFSSERVER

Regen: makesyscalls.sh changed.

Regen; syscalls.master and makesyscalls.sh changed.

Regen: use POSIX semantics for chown()/fchown().

Regen.

Regen.

Regen: back out RCD ID related changes.

regened with RCSIDs in place

Regen.

Regen: Use compat_12_sys_swapon().

Emulate RISC Ultrix cacheflush() and cachectl() syscalls on mips.

Add changes to make vic-2.8 Ultrix binaries work on NetBSD with COMPAT_ULTRIX:
* Add IPmulticast setsockopt emulation.
* Add Ultrix shmsys emulation (untested).
* tidy up use of stackgap.

Syscalls.master changed, regen. (NFSCLIENT -> NFS)

branches: 1.16.2;
Regen.

Regen.

branches: 1.14.4;
Add '/emul/ultrix' pathname processing to Ultrix emulation, and move
Ultrix syscalls that require that processing out of ultrix_misc.c
to ultrix_pathname.c.

Add emulation of ultrix mount(2). Sufficient to NFS-mount filesystems
using a NetBSD kernel in an ultrix root filesystem.

Move wait emulation to the old (v7) wait syscall number, as that's
what the Ultrix ufs_mount binary uses.

Add emulation of Ultrix select: before calling native sys_select(),
limit the number of FDs to select on to the maximum supported by NetBSD --
which is as many FDs as the emul_ultrix process can have open, anyway.

Add emulation of Ultrix getmnt(2) in ultrix_fs.c

Add partial emulation of Ultrix tty ioctl()s in ultrix_ioctl.c, derived
from compat/sunos/sunos_ioctl.c. Ultrix libc's ``isatty()'' now works
in compat_emul processes.

Reran makesyscalls.sh.

makesyscalls.sh changed

Clear up name conflict between Ultrix syscall 103 and 139.

- added struct emul to all emulations.
- removed all setup functions.
- added copyargs() functions where needed.

added sigreturn

changes for new sysent structure (from J. Stone)

add ultrix_{get,set}sysinfo() from Arne H Juul <arnej@dsl.unit.no>

branches: 1.4.2;
fix a botch, and gen syscall files

update to reflect compat_ultrix syscalls.master

much works but untested w/new fs. expect more tomorrow

first swipe at ultrix compat. expect many bug fixes. very related to compat/sunos