Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.28.2;
Introduce sh3/sysarch.h and add SH3_SYNC_ICACHE

fenv.h for sh

branches: 1.26.12; 1.26.30;
Do not install bus.h.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

Merge newlock2 to head.

branches: 1.23.4;
don't install <machine/db_machdep.h>, this is kernel only

Nuke va-sh.h. stdarg.h and varargs.h now use __builtin_va_*.

branches: 1.21.2; 1.21.4; 1.21.8; 1.21.10;
Need to install byte_swap.h and bswap.h needs to include sh3/byte_swap.h.

branches: 1.20.2; 1.20.4;
merge ktrace-lwp.

branches: 1.19.12;
Factor out W{CHAR,INT}_{MAX,MIN} into their own header file.

branches: 1.18.2;
Merge the nathanw_sa branch.

Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more.

Implement pmc(9) -- An interface to hardware performance monitoring
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.

pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.

branches: 1.15.2; 1.15.6;
clean up disassembler code.

rework general exception, and TLB exception handling for new pmap.
all exception staffs are moved to exception.[ch]

Rework interrupt code.
+ Fully utilize SH SR.I[0:3] interrupt level.
+ software interrupt is emulated by TMU1, 2 one shot interrupt.
+ implement generic soft interrupts.
+ implement clockframe correctly.

Remove some files that no longer exist.

branches: 1.11.2;
Add definitions of C99 integer format conversion macros.
XXX Fastest minimum-width integer types haven't been decided upon yet.

Add definitions of C99 specified-width integer type limits.
XXX Fastest minimum-width integer types haven't been decided upon yet.

Add definitions of C99 integer constant macros.
Tidy Makefiles up a little.

branches: 1.8.2;
Add <machine/int_types.h>, which provides namespace-pure definitions
of exact-width integer types.

Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.

These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.

Install "machineendian_machdep.h".

watchdog timer

Add NAN constant glue for sh3.

add cpgreg.h and pfcreg.h for "make includes"

remove exec_coff.h

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

fenv.h for sh

branches: 1.26.30;
Do not install bus.h.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

Merge newlock2 to head.

branches: 1.23.4;
don't install <machine/db_machdep.h>, this is kernel only

Nuke va-sh.h. stdarg.h and varargs.h now use __builtin_va_*.

branches: 1.21.2; 1.21.4; 1.21.8; 1.21.10;
Need to install byte_swap.h and bswap.h needs to include sh3/byte_swap.h.

branches: 1.20.2; 1.20.4;
merge ktrace-lwp.

branches: 1.19.12;
Factor out W{CHAR,INT}_{MAX,MIN} into their own header file.

branches: 1.18.2;
Merge the nathanw_sa branch.

Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more.

Implement pmc(9) -- An interface to hardware performance monitoring
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.

pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.

branches: 1.15.2; 1.15.6;
clean up disassembler code.

rework general exception, and TLB exception handling for new pmap.
all exception staffs are moved to exception.[ch]

Rework interrupt code.
+ Fully utilize SH SR.I[0:3] interrupt level.
+ software interrupt is emulated by TMU1, 2 one shot interrupt.
+ implement generic soft interrupts.
+ implement clockframe correctly.

Remove some files that no longer exist.

branches: 1.11.2;
Add definitions of C99 integer format conversion macros.
XXX Fastest minimum-width integer types haven't been decided upon yet.

Add definitions of C99 specified-width integer type limits.
XXX Fastest minimum-width integer types haven't been decided upon yet.

Add definitions of C99 integer constant macros.
Tidy Makefiles up a little.

branches: 1.8.2;
Add <machine/int_types.h>, which provides namespace-pure definitions
of exact-width integer types.

Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.

These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.

Install "machineendian_machdep.h".

watchdog timer

Add NAN constant glue for sh3.

add cpgreg.h and pfcreg.h for "make includes"

remove exec_coff.h

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).