Drop unused opt_altivec.h, opt_interrupt.h, opt_ipi.h, and opt_pic.h.

Style and cosmetic changes. No binary changes intended.

Fix false sharing problems with cpu_info. Identified with tprof(8).
This was a very nice win in my tests on a 48 CPU box.

- Reorganise cpu_data slightly according to usage.
- Put cpu_onproc into struct cpu_info alongside ci_curlwp (now is ci_onproc).
- On x86, put some items in their own cache lines according to usage, like
the IPI bitmask and ci_want_resched.

Add IPI_AST.

branches: 1.12.18;
ddb MP support

branches: 1.11.4;
Implement MI IPI interface with cross-call support.

branches: 1.10.12; 1.10.26;
Cleanup includes. Explicitly include <powerpc/psl.h>

Remove <machine/atomic.h>; use <sys/atomic.h> instead.
Add <powerpc/cpuset.h> (for mpc85xx pmap).
Add some initial MP code for mpc85xx
Rework ipi code to be common across all ppcs
Change PPC to keep curlwp in %r13 while in the kernel.
Move astpending from cpu_info to mdlwp
Improve cpu_need_resched to be more MP friendly.

branches: 1.8.2;
Move powerpc to use pcu to manage FPU/AltiVec/SPE.

Fix some fallout from building the macppc GENERIC.MP.

branches: 1.6.2;
Add missing sys/xcall.h inclusion, remove sys/malloc.h one.

Implement high priority (XC_HIGHPRI) xcall(9) mechanism - a facility
to execute functions from software interrupt context, at SOFTINT_CLOCK.
Functions must be lightweight. Will be used for passive serialization.

OK ad@.

branches: 1.4.20; 1.4.22;
Remove clause 3 and 4 from TNF licenses

branches: 1.3.2; 1.3.4;
SMP support for ofppc. (finally) Much thanks to Matt Thomas for help in
figuring out all the crazy nuances of getting this working, and to
Michael Lorenz for testing/fixing my changes on macppc. Tested with a
quad-proc 7044-270.
Summary of changes:

Bumped CPU_MAXNUM to 16 on ofppc.
Added md_* routines to ofppc/cpu.c, to sync the timebase, and awaken the CPUs.
Fixed a bug in the test for a 64bit bridge cpu early in locore.S
Added code to set the interrupt priority for all CPUs with an openpic.
Change rtas to probe before cpus, to allow use of the rtas freeze/thaw
timebase code routines.
Fix CPU_INFO_FOREACH macro to iterate through detected cpus, not CPU_MAXNUM.
Change most uses of ci_cpuid to ci_index, to deal with CPUs that do not allow
writing to SPR_PIR. Don't write SPR_PIR unless the secondary cpu identifies
itself as 0.
Change the hatchstack/interrupt stack allocations to allocate a 8192byte
interrupt stack, and a 4096 byte hatch stack, align them to 16 bytes, and
allocate them no lower than 0x10000. Allocate them separately to prevent the
hatch stack corrupting the interrupt stack later on.
If the CPU is a 64bit cpu, copy SPR_ASR in cpu_hatch()
Set the idle stack to ci->ci_data.cpu_idlelwp->l_addr->u_pcb.pcb_sp.
Add OF_start_cpu(). Add a routine to ofwoea_initppc to spin up secondary
procs early, and place them into a spinloop waiting for the hatch routines
to be ready.
Modify the ipi routines to deal with openpics that reverse byte order on read
from an ipi register. (such as on the 7044)
Change the rtas setup to allocate the rtas physical base address above
the kernel, to avoid mucking up the hatch/interrupt stacks.

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8; 1.2.12; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2;
file ipi.c was initially added on branch ppcoea-renovation.

Fix false sharing problems with cpu_info. Identified with tprof(8).
This was a very nice win in my tests on a 48 CPU box.

- Reorganise cpu_data slightly according to usage.
- Put cpu_onproc into struct cpu_info alongside ci_curlwp (now is ci_onproc).
- On x86, put some items in their own cache lines according to usage, like
the IPI bitmask and ci_want_resched.

Add IPI_AST.

ddb MP support

branches: 1.11.4;
Implement MI IPI interface with cross-call support.

branches: 1.10.12; 1.10.26;
Cleanup includes. Explicitly include <powerpc/psl.h>

Remove <machine/atomic.h>; use <sys/atomic.h> instead.
Add <powerpc/cpuset.h> (for mpc85xx pmap).
Add some initial MP code for mpc85xx
Rework ipi code to be common across all ppcs
Change PPC to keep curlwp in %r13 while in the kernel.
Move astpending from cpu_info to mdlwp
Improve cpu_need_resched to be more MP friendly.

branches: 1.8.2;
Move powerpc to use pcu to manage FPU/AltiVec/SPE.

Fix some fallout from building the macppc GENERIC.MP.

branches: 1.6.2;
Add missing sys/xcall.h inclusion, remove sys/malloc.h one.

Implement high priority (XC_HIGHPRI) xcall(9) mechanism - a facility
to execute functions from software interrupt context, at SOFTINT_CLOCK.
Functions must be lightweight. Will be used for passive serialization.

OK ad@.

branches: 1.4.20; 1.4.22;
Remove clause 3 and 4 from TNF licenses

branches: 1.3.2; 1.3.4;
SMP support for ofppc. (finally) Much thanks to Matt Thomas for help in
figuring out all the crazy nuances of getting this working, and to
Michael Lorenz for testing/fixing my changes on macppc. Tested with a
quad-proc 7044-270.
Summary of changes:

Bumped CPU_MAXNUM to 16 on ofppc.
Added md_* routines to ofppc/cpu.c, to sync the timebase, and awaken the CPUs.
Fixed a bug in the test for a 64bit bridge cpu early in locore.S
Added code to set the interrupt priority for all CPUs with an openpic.
Change rtas to probe before cpus, to allow use of the rtas freeze/thaw
timebase code routines.
Fix CPU_INFO_FOREACH macro to iterate through detected cpus, not CPU_MAXNUM.
Change most uses of ci_cpuid to ci_index, to deal with CPUs that do not allow
writing to SPR_PIR. Don't write SPR_PIR unless the secondary cpu identifies
itself as 0.
Change the hatchstack/interrupt stack allocations to allocate a 8192byte
interrupt stack, and a 4096 byte hatch stack, align them to 16 bytes, and
allocate them no lower than 0x10000. Allocate them separately to prevent the
hatch stack corrupting the interrupt stack later on.
If the CPU is a 64bit cpu, copy SPR_ASR in cpu_hatch()
Set the idle stack to ci->ci_data.cpu_idlelwp->l_addr->u_pcb.pcb_sp.
Add OF_start_cpu(). Add a routine to ofwoea_initppc to spin up secondary
procs early, and place them into a spinloop waiting for the hatch routines
to be ready.
Modify the ipi routines to deal with openpics that reverse byte order on read
from an ipi register. (such as on the 7044)
Change the rtas setup to allocate the rtas physical base address above
the kernel, to avoid mucking up the hatch/interrupt stacks.

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8; 1.2.12; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2;
file ipi.c was initially added on branch ppcoea-renovation.

Add IPI_AST.

ddb MP support

branches: 1.11.4;
Implement MI IPI interface with cross-call support.

branches: 1.10.12; 1.10.26;
Cleanup includes. Explicitly include <powerpc/psl.h>

Remove <machine/atomic.h>; use <sys/atomic.h> instead.
Add <powerpc/cpuset.h> (for mpc85xx pmap).
Add some initial MP code for mpc85xx
Rework ipi code to be common across all ppcs
Change PPC to keep curlwp in %r13 while in the kernel.
Move astpending from cpu_info to mdlwp
Improve cpu_need_resched to be more MP friendly.

branches: 1.8.2;
Move powerpc to use pcu to manage FPU/AltiVec/SPE.

Fix some fallout from building the macppc GENERIC.MP.

branches: 1.6.2;
Add missing sys/xcall.h inclusion, remove sys/malloc.h one.

Implement high priority (XC_HIGHPRI) xcall(9) mechanism - a facility
to execute functions from software interrupt context, at SOFTINT_CLOCK.
Functions must be lightweight. Will be used for passive serialization.

OK ad@.

branches: 1.4.20; 1.4.22;
Remove clause 3 and 4 from TNF licenses

branches: 1.3.2; 1.3.4;
SMP support for ofppc. (finally) Much thanks to Matt Thomas for help in
figuring out all the crazy nuances of getting this working, and to
Michael Lorenz for testing/fixing my changes on macppc. Tested with a
quad-proc 7044-270.
Summary of changes:

Bumped CPU_MAXNUM to 16 on ofppc.
Added md_* routines to ofppc/cpu.c, to sync the timebase, and awaken the CPUs.
Fixed a bug in the test for a 64bit bridge cpu early in locore.S
Added code to set the interrupt priority for all CPUs with an openpic.
Change rtas to probe before cpus, to allow use of the rtas freeze/thaw
timebase code routines.
Fix CPU_INFO_FOREACH macro to iterate through detected cpus, not CPU_MAXNUM.
Change most uses of ci_cpuid to ci_index, to deal with CPUs that do not allow
writing to SPR_PIR. Don't write SPR_PIR unless the secondary cpu identifies
itself as 0.
Change the hatchstack/interrupt stack allocations to allocate a 8192byte
interrupt stack, and a 4096 byte hatch stack, align them to 16 bytes, and
allocate them no lower than 0x10000. Allocate them separately to prevent the
hatch stack corrupting the interrupt stack later on.
If the CPU is a 64bit cpu, copy SPR_ASR in cpu_hatch()
Set the idle stack to ci->ci_data.cpu_idlelwp->l_addr->u_pcb.pcb_sp.
Add OF_start_cpu(). Add a routine to ofwoea_initppc to spin up secondary
procs early, and place them into a spinloop waiting for the hatch routines
to be ready.
Modify the ipi routines to deal with openpics that reverse byte order on read
from an ipi register. (such as on the 7044)
Change the rtas setup to allocate the rtas physical base address above
the kernel, to avoid mucking up the hatch/interrupt stacks.

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8; 1.2.12; 1.2.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2;
file ipi.c was initially added on branch ppcoea-renovation.