Include "opt_param.h" (ifdef _KERNEL_OPT) everywhere that MSGBUFSIZE is
referenced since some sources include <machine/param.h>.

Style and cosmetic changes. No binary changes intended.

Reduce UPAGES from 2 to 1 for ibm4xx, which was originally 1 and bumped
to 2 in rev 1.29:

http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/powerpc/include/param.h#rev1.29

Since page size is 16KB on ibm4xx, USPACE is still 16KB, which is the
same size as on other powerpc processors.

This avoids kernel crash described in PR kern/54994. Also, even if the
PR is resolved, fork(2) easily fails with ENOMEM if UPAGES is 2, which
requires physically contiguous pages for u-area. No bad side effect is
observed as far as I can see.

XXX
Even with this commit, kern/54994 still critically affects other archs
with __HAVE_CPU_UAREA_ROUTINES, i.e., alpha, mips, powerpc/{oea,booke},
and riscv.

branches: 1.31.6;
move DEV_BSIZE, DEV_BSHIFT out of MD param.h, they are same on all ports

also move BLKDEV_IOSIZE, MAXPHYS, but allow override since some ports
have different value (powerpc uses NBPG for BLKDEV_IOSIZE, sun2/sun3
have lower MAXPHYS)

branches: 1.30.14; 1.30.16;
belatedly fix constants for ppc64 (this does not define __arch64__ like sparc
does?)

branches: 1.29.14; 1.29.18;
More stack for ibm4xx slow machines.

increase powerpc NKMEMPAGES_MAX_DEFAULT to 256MB. remove the macppc
overrides that are now the same as the powerpc default.

branches: 1.27.2; 1.27.4; 1.27.6;
PowerPC wants 16-byte aligned stacks (for AltiVec).

Use and define ALIGN() ALIGN_POINTER() and STACK_ALIGN() consistently,
and avoid definining them in 10 different places if not needed.

Change CMSG_SPACE and CMSG_LEN to provide Integer Constant Expressions
again. This was changed in sys/socket.h r1.51 to work around fallout
from the IPv6 aux data migration. It broke the historic ABI on some
platforms. This commit restores compatibility for netbsd32 code on such
platforms and provides a template for future changes to the CMSG_*
alignment. Revert PCC/Clang workarounds in postfix and tmux.

branches: 1.24.2; 1.24.6;
Cleanup powerpc param.h. If compiling a MODULE, ignore port-specific stuff.
Only include <machine/cpu.h> in <powerpc/param.h> at the end.

branches: 1.23.2;
If _KERNEL is not defined, force MACHINE to be "powerpc". Userland should be
using uname/sysctl to get this value.

branches: 1.22.2;
default powerpc64 mbufs to 512 bytes, like other 64 bit platforms.
from dennis.c.ferguson@gmail.com in PR#43028.

branches: 1.21.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.20.60; 1.20.80;
- remove unused bdbtofsb.
- move the following macros from MD headers to sys/param.h.
ctod
dtoc
ctob
btoc
dbtob
btodb

branches: 1.19.4; 1.19.8;
merge ktrace-lwp.

branches: 1.18.10;
Make MSIZE and MCLSHIFT overrideable in <machine/param.h>

branches: 1.17.2;
Re-arrange things in evbppc & powerpc to support OEA-based eval boards
in evbppc. OEA-based board(s) to be added later.

More cleanup for OLDPMAP.

ALIGN should use u_long, not u_int

Allow MAXPHYS to be overriden. Increase the default MSGBUFSIZE to 2 pages.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

branches: 1.12.2; 1.12.8;
Make the new pmap optional. Use the old (stable!) pmap by default.

Up the default # of NMBCLUSTERS to 2048 (GATEWAY) & 1024 (non-GATEWAY)
from 512/256.

Introduce a new & faster pmap for the MPC6xx (60x, 7xx, 7xxx) PPC CPUs.
Move MPC6xx dependent header files to powerpc/include/mpc6xx/

use _KERNEL_OPT

branches: 1.8.2;
raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.

branches: 1.7.4;
Update for the NKMEMPAGES changes.

CL* discarding.

branches: 1.5.12; 1.5.18;
As ovbcopy & bcopy are now done in terms of mem* routines, it makes
no sense to "#define ovbcopy bcopy".

Rename NetBSD/powerpc to NetBSD/ofppc.
New sys/arch/powerpc with PowerPC-generic stuff.

Pull in opt_gateway.h as appropriate.

Define ALIGNED_POINTER

branches: 1.1.6;
PowerPC port

Style and cosmetic changes. No binary changes intended.

Reduce UPAGES from 2 to 1 for ibm4xx, which was originally 1 and bumped
to 2 in rev 1.29:

http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/powerpc/include/param.h#rev1.29

Since page size is 16KB on ibm4xx, USPACE is still 16KB, which is the
same size as on other powerpc processors.

This avoids kernel crash described in PR kern/54994. Also, even if the
PR is resolved, fork(2) easily fails with ENOMEM if UPAGES is 2, which
requires physically contiguous pages for u-area. No bad side effect is
observed as far as I can see.

XXX
Even with this commit, kern/54994 still critically affects other archs
with __HAVE_CPU_UAREA_ROUTINES, i.e., alpha, mips, powerpc/{oea,booke},
and riscv.

branches: 1.31.6;
move DEV_BSIZE, DEV_BSHIFT out of MD param.h, they are same on all ports

also move BLKDEV_IOSIZE, MAXPHYS, but allow override since some ports
have different value (powerpc uses NBPG for BLKDEV_IOSIZE, sun2/sun3
have lower MAXPHYS)

branches: 1.30.14; 1.30.16;
belatedly fix constants for ppc64 (this does not define __arch64__ like sparc
does?)

branches: 1.29.14; 1.29.18;
More stack for ibm4xx slow machines.

increase powerpc NKMEMPAGES_MAX_DEFAULT to 256MB. remove the macppc
overrides that are now the same as the powerpc default.

branches: 1.27.2; 1.27.4; 1.27.6;
PowerPC wants 16-byte aligned stacks (for AltiVec).

Use and define ALIGN() ALIGN_POINTER() and STACK_ALIGN() consistently,
and avoid definining them in 10 different places if not needed.

Change CMSG_SPACE and CMSG_LEN to provide Integer Constant Expressions
again. This was changed in sys/socket.h r1.51 to work around fallout
from the IPv6 aux data migration. It broke the historic ABI on some
platforms. This commit restores compatibility for netbsd32 code on such
platforms and provides a template for future changes to the CMSG_*
alignment. Revert PCC/Clang workarounds in postfix and tmux.

branches: 1.24.2; 1.24.6;
Cleanup powerpc param.h. If compiling a MODULE, ignore port-specific stuff.
Only include <machine/cpu.h> in <powerpc/param.h> at the end.

branches: 1.23.2;
If _KERNEL is not defined, force MACHINE to be "powerpc". Userland should be
using uname/sysctl to get this value.

branches: 1.22.2;
default powerpc64 mbufs to 512 bytes, like other 64 bit platforms.
from dennis.c.ferguson@gmail.com in PR#43028.

branches: 1.21.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.20.60; 1.20.80;
- remove unused bdbtofsb.
- move the following macros from MD headers to sys/param.h.
ctod
dtoc
ctob
btoc
dbtob
btodb

branches: 1.19.4; 1.19.8;
merge ktrace-lwp.

branches: 1.18.10;
Make MSIZE and MCLSHIFT overrideable in <machine/param.h>

branches: 1.17.2;
Re-arrange things in evbppc & powerpc to support OEA-based eval boards
in evbppc. OEA-based board(s) to be added later.

More cleanup for OLDPMAP.

ALIGN should use u_long, not u_int

Allow MAXPHYS to be overriden. Increase the default MSGBUFSIZE to 2 pages.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

branches: 1.12.2; 1.12.8;
Make the new pmap optional. Use the old (stable!) pmap by default.

Up the default # of NMBCLUSTERS to 2048 (GATEWAY) & 1024 (non-GATEWAY)
from 512/256.

Introduce a new & faster pmap for the MPC6xx (60x, 7xx, 7xxx) PPC CPUs.
Move MPC6xx dependent header files to powerpc/include/mpc6xx/

use _KERNEL_OPT

branches: 1.8.2;
raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.

branches: 1.7.4;
Update for the NKMEMPAGES changes.

CL* discarding.

branches: 1.5.12; 1.5.18;
As ovbcopy & bcopy are now done in terms of mem* routines, it makes
no sense to "#define ovbcopy bcopy".

Rename NetBSD/powerpc to NetBSD/ofppc.
New sys/arch/powerpc with PowerPC-generic stuff.

Pull in opt_gateway.h as appropriate.

Define ALIGNED_POINTER

branches: 1.1.6;
PowerPC port

Reduce UPAGES from 2 to 1 for ibm4xx, which was originally 1 and bumped
to 2 in rev 1.29:

http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/powerpc/include/param.h#rev1.29

Since page size is 16KB on ibm4xx, USPACE is still 16KB, which is the
same size as on other powerpc processors.

This avoids kernel crash described in PR kern/54994. Also, even if the
PR is resolved, fork(2) easily fails with ENOMEM if UPAGES is 2, which
requires physically contiguous pages for u-area. No bad side effect is
observed as far as I can see.

XXX
Even with this commit, kern/54994 still critically affects other archs
with __HAVE_CPU_UAREA_ROUTINES, i.e., alpha, mips, powerpc/{oea,booke},
and riscv.

move DEV_BSIZE, DEV_BSHIFT out of MD param.h, they are same on all ports

also move BLKDEV_IOSIZE, MAXPHYS, but allow override since some ports
have different value (powerpc uses NBPG for BLKDEV_IOSIZE, sun2/sun3
have lower MAXPHYS)

branches: 1.30.14; 1.30.16;
belatedly fix constants for ppc64 (this does not define __arch64__ like sparc
does?)

branches: 1.29.14; 1.29.18;
More stack for ibm4xx slow machines.

increase powerpc NKMEMPAGES_MAX_DEFAULT to 256MB. remove the macppc
overrides that are now the same as the powerpc default.

branches: 1.27.2; 1.27.4; 1.27.6;
PowerPC wants 16-byte aligned stacks (for AltiVec).

Use and define ALIGN() ALIGN_POINTER() and STACK_ALIGN() consistently,
and avoid definining them in 10 different places if not needed.

Change CMSG_SPACE and CMSG_LEN to provide Integer Constant Expressions
again. This was changed in sys/socket.h r1.51 to work around fallout
from the IPv6 aux data migration. It broke the historic ABI on some
platforms. This commit restores compatibility for netbsd32 code on such
platforms and provides a template for future changes to the CMSG_*
alignment. Revert PCC/Clang workarounds in postfix and tmux.

branches: 1.24.2; 1.24.6;
Cleanup powerpc param.h. If compiling a MODULE, ignore port-specific stuff.
Only include <machine/cpu.h> in <powerpc/param.h> at the end.

branches: 1.23.2;
If _KERNEL is not defined, force MACHINE to be "powerpc". Userland should be
using uname/sysctl to get this value.

branches: 1.22.2;
default powerpc64 mbufs to 512 bytes, like other 64 bit platforms.
from dennis.c.ferguson@gmail.com in PR#43028.

branches: 1.21.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.20.60; 1.20.80;
- remove unused bdbtofsb.
- move the following macros from MD headers to sys/param.h.
ctod
dtoc
ctob
btoc
dbtob
btodb

branches: 1.19.4; 1.19.8;
merge ktrace-lwp.

branches: 1.18.10;
Make MSIZE and MCLSHIFT overrideable in <machine/param.h>

branches: 1.17.2;
Re-arrange things in evbppc & powerpc to support OEA-based eval boards
in evbppc. OEA-based board(s) to be added later.

More cleanup for OLDPMAP.

ALIGN should use u_long, not u_int

Allow MAXPHYS to be overriden. Increase the default MSGBUFSIZE to 2 pages.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

branches: 1.12.2; 1.12.8;
Make the new pmap optional. Use the old (stable!) pmap by default.

Up the default # of NMBCLUSTERS to 2048 (GATEWAY) & 1024 (non-GATEWAY)
from 512/256.

Introduce a new & faster pmap for the MPC6xx (60x, 7xx, 7xxx) PPC CPUs.
Move MPC6xx dependent header files to powerpc/include/mpc6xx/

use _KERNEL_OPT

branches: 1.8.2;
raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.

branches: 1.7.4;
Update for the NKMEMPAGES changes.

CL* discarding.

branches: 1.5.12; 1.5.18;
As ovbcopy & bcopy are now done in terms of mem* routines, it makes
no sense to "#define ovbcopy bcopy".

Rename NetBSD/powerpc to NetBSD/ofppc.
New sys/arch/powerpc with PowerPC-generic stuff.

Pull in opt_gateway.h as appropriate.

Define ALIGNED_POINTER

branches: 1.1.6;
PowerPC port

move DEV_BSIZE, DEV_BSHIFT out of MD param.h, they are same on all ports

also move BLKDEV_IOSIZE, MAXPHYS, but allow override since some ports
have different value (powerpc uses NBPG for BLKDEV_IOSIZE, sun2/sun3
have lower MAXPHYS)

branches: 1.30.14;
belatedly fix constants for ppc64 (this does not define __arch64__ like sparc
does?)

branches: 1.29.14; 1.29.18;
More stack for ibm4xx slow machines.

increase powerpc NKMEMPAGES_MAX_DEFAULT to 256MB. remove the macppc
overrides that are now the same as the powerpc default.

branches: 1.27.2; 1.27.4; 1.27.6;
PowerPC wants 16-byte aligned stacks (for AltiVec).

Use and define ALIGN() ALIGN_POINTER() and STACK_ALIGN() consistently,
and avoid definining them in 10 different places if not needed.

Change CMSG_SPACE and CMSG_LEN to provide Integer Constant Expressions
again. This was changed in sys/socket.h r1.51 to work around fallout
from the IPv6 aux data migration. It broke the historic ABI on some
platforms. This commit restores compatibility for netbsd32 code on such
platforms and provides a template for future changes to the CMSG_*
alignment. Revert PCC/Clang workarounds in postfix and tmux.

branches: 1.24.2; 1.24.6;
Cleanup powerpc param.h. If compiling a MODULE, ignore port-specific stuff.
Only include <machine/cpu.h> in <powerpc/param.h> at the end.

branches: 1.23.2;
If _KERNEL is not defined, force MACHINE to be "powerpc". Userland should be
using uname/sysctl to get this value.

branches: 1.22.2;
default powerpc64 mbufs to 512 bytes, like other 64 bit platforms.
from dennis.c.ferguson@gmail.com in PR#43028.

branches: 1.21.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.20.60; 1.20.80;
- remove unused bdbtofsb.
- move the following macros from MD headers to sys/param.h.
ctod
dtoc
ctob
btoc
dbtob
btodb

branches: 1.19.4; 1.19.8;
merge ktrace-lwp.

branches: 1.18.10;
Make MSIZE and MCLSHIFT overrideable in <machine/param.h>

branches: 1.17.2;
Re-arrange things in evbppc & powerpc to support OEA-based eval boards
in evbppc. OEA-based board(s) to be added later.

More cleanup for OLDPMAP.

ALIGN should use u_long, not u_int

Allow MAXPHYS to be overriden. Increase the default MSGBUFSIZE to 2 pages.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

branches: 1.12.2; 1.12.8;
Make the new pmap optional. Use the old (stable!) pmap by default.

Up the default # of NMBCLUSTERS to 2048 (GATEWAY) & 1024 (non-GATEWAY)
from 512/256.

Introduce a new & faster pmap for the MPC6xx (60x, 7xx, 7xxx) PPC CPUs.
Move MPC6xx dependent header files to powerpc/include/mpc6xx/

use _KERNEL_OPT

branches: 1.8.2;
raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.

branches: 1.7.4;
Update for the NKMEMPAGES changes.

CL* discarding.

branches: 1.5.12; 1.5.18;
As ovbcopy & bcopy are now done in terms of mem* routines, it makes
no sense to "#define ovbcopy bcopy".

Rename NetBSD/powerpc to NetBSD/ofppc.
New sys/arch/powerpc with PowerPC-generic stuff.

Pull in opt_gateway.h as appropriate.

Define ALIGNED_POINTER

branches: 1.1.6;
PowerPC port

belatedly fix constants for ppc64 (this does not define __arch64__ like sparc
does?)

More stack for ibm4xx slow machines.

increase powerpc NKMEMPAGES_MAX_DEFAULT to 256MB. remove the macppc
overrides that are now the same as the powerpc default.

branches: 1.27.2; 1.27.4; 1.27.6;
PowerPC wants 16-byte aligned stacks (for AltiVec).

Use and define ALIGN() ALIGN_POINTER() and STACK_ALIGN() consistently,
and avoid definining them in 10 different places if not needed.

Change CMSG_SPACE and CMSG_LEN to provide Integer Constant Expressions
again. This was changed in sys/socket.h r1.51 to work around fallout
from the IPv6 aux data migration. It broke the historic ABI on some
platforms. This commit restores compatibility for netbsd32 code on such
platforms and provides a template for future changes to the CMSG_*
alignment. Revert PCC/Clang workarounds in postfix and tmux.

branches: 1.24.2; 1.24.6;
Cleanup powerpc param.h. If compiling a MODULE, ignore port-specific stuff.
Only include <machine/cpu.h> in <powerpc/param.h> at the end.

branches: 1.23.2;
If _KERNEL is not defined, force MACHINE to be "powerpc". Userland should be
using uname/sysctl to get this value.

branches: 1.22.2;
default powerpc64 mbufs to 512 bytes, like other 64 bit platforms.
from dennis.c.ferguson@gmail.com in PR#43028.

branches: 1.21.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.20.60; 1.20.80;
- remove unused bdbtofsb.
- move the following macros from MD headers to sys/param.h.
ctod
dtoc
ctob
btoc
dbtob
btodb

branches: 1.19.4; 1.19.8;
merge ktrace-lwp.

branches: 1.18.10;
Make MSIZE and MCLSHIFT overrideable in <machine/param.h>

branches: 1.17.2;
Re-arrange things in evbppc & powerpc to support OEA-based eval boards
in evbppc. OEA-based board(s) to be added later.

More cleanup for OLDPMAP.

ALIGN should use u_long, not u_int

Allow MAXPHYS to be overriden. Increase the default MSGBUFSIZE to 2 pages.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

branches: 1.12.2; 1.12.8;
Make the new pmap optional. Use the old (stable!) pmap by default.

Up the default # of NMBCLUSTERS to 2048 (GATEWAY) & 1024 (non-GATEWAY)
from 512/256.

Introduce a new & faster pmap for the MPC6xx (60x, 7xx, 7xxx) PPC CPUs.
Move MPC6xx dependent header files to powerpc/include/mpc6xx/

use _KERNEL_OPT

branches: 1.8.2;
raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.

branches: 1.7.4;
Update for the NKMEMPAGES changes.

CL* discarding.

branches: 1.5.12; 1.5.18;
As ovbcopy & bcopy are now done in terms of mem* routines, it makes
no sense to "#define ovbcopy bcopy".

Rename NetBSD/powerpc to NetBSD/ofppc.
New sys/arch/powerpc with PowerPC-generic stuff.

Pull in opt_gateway.h as appropriate.

Define ALIGNED_POINTER

branches: 1.1.6;
PowerPC port