Remove fpsp include and #ifdef FPSP blocks for news68k.
FPSP is necessary for 040/060 only, and news68k doesn't have such hardware.

Noted by Izumi Tsutsui.

include fpsp Makefile.inc in Makefile.news68k, same as other m68k ports.

needed for FPSP option to build, otherwise FPSP specific vectors are undefined.

- Determine KERN_AS automatically depending on whether OPT_MODULAR is
set or not, in the same way as libcompat.

- Specify OPT_MODULAR in the port Makefile instead of KERN_AS.

Now, KERN_AS=library is used for kernels without module(7) for all ports.

OK christos

branches: 1.21.16; 1.21.18;
Declare dependency on fpsp.o via newly introduced ${MD_LIBS} instead of
${MD_OBJS}.

${MD_OBJS} should be used only for objects that must be linked first (i.e.,
start code). Objects have to be compiled following common compile rules,
and have to be generated into common places (i.e., top of kernel build
directory).

${MD_LIBS} defines libraries that are built by separate makefiles, under
separate directories. `Makefile.kern.inc' doesn't know intermediate library
objects.

branches: 1.20.14; 1.20.32;
Switch remaining platforms to modern CPP for assembler.

branches: 1.19.26; 1.19.32; 1.19.34;
Missing assym.h dependencies.

branches: 1.18.50; 1.18.70; 1.18.74;
merge ktrace-lwp.

branches: 1.17.2;
s/GENASSYM/GENASSYM_CONF/ so we can use "GENASSYM" as the program name.

Add the %MAKEOPTIONSAPPEND token at the end of the file, after the
common Makefile.kern.inc has been included.

branches: 1.15.6; 1.15.10;
The traditional C preprocessor is fixed in GCC 3.3 now, so no need
to skip -traditional-cpp for HAVE_GCC3.

Don't use -traditional-cpp if HAVE_GCC3.

branches: 1.13.8;
Roll the rest of the ports over to the new MI kernel build machinery.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.11.2;
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.

Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.

branches: 1.10.2;
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.

branches: 1.9.2;
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.

branches: 1.8.2;
delete obsolete comment

branches: 1.7.6;
Add "install" target, so "make install" after building the kernel
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.

HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.

Revert STRIPPROG -> STRIP

Add "dependall" target for comfort.

STRIP -> STRIPPROG

Change STRIPFLAGS=-g for cross-toolchains.

branches: 1.1.2;
Initial import of news68k port.

include fpsp Makefile.inc in Makefile.news68k, same as other m68k ports.

needed for FPSP option to build, otherwise FPSP specific vectors are undefined.

- Determine KERN_AS automatically depending on whether OPT_MODULAR is
set or not, in the same way as libcompat.

- Specify OPT_MODULAR in the port Makefile instead of KERN_AS.

Now, KERN_AS=library is used for kernels without module(7) for all ports.

OK christos

branches: 1.21.16; 1.21.18;
Declare dependency on fpsp.o via newly introduced ${MD_LIBS} instead of
${MD_OBJS}.

${MD_OBJS} should be used only for objects that must be linked first (i.e.,
start code). Objects have to be compiled following common compile rules,
and have to be generated into common places (i.e., top of kernel build
directory).

${MD_LIBS} defines libraries that are built by separate makefiles, under
separate directories. `Makefile.kern.inc' doesn't know intermediate library
objects.

branches: 1.20.14; 1.20.32;
Switch remaining platforms to modern CPP for assembler.

branches: 1.19.26; 1.19.32; 1.19.34;
Missing assym.h dependencies.

branches: 1.18.50; 1.18.70; 1.18.74;
merge ktrace-lwp.

branches: 1.17.2;
s/GENASSYM/GENASSYM_CONF/ so we can use "GENASSYM" as the program name.

Add the %MAKEOPTIONSAPPEND token at the end of the file, after the
common Makefile.kern.inc has been included.

branches: 1.15.6; 1.15.10;
The traditional C preprocessor is fixed in GCC 3.3 now, so no need
to skip -traditional-cpp for HAVE_GCC3.

Don't use -traditional-cpp if HAVE_GCC3.

branches: 1.13.8;
Roll the rest of the ports over to the new MI kernel build machinery.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.11.2;
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.

Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.

branches: 1.10.2;
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.

branches: 1.9.2;
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.

branches: 1.8.2;
delete obsolete comment

branches: 1.7.6;
Add "install" target, so "make install" after building the kernel
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.

HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.

Revert STRIPPROG -> STRIP

Add "dependall" target for comfort.

STRIP -> STRIPPROG

Change STRIPFLAGS=-g for cross-toolchains.

branches: 1.1.2;
Initial import of news68k port.

- Determine KERN_AS automatically depending on whether OPT_MODULAR is
set or not, in the same way as libcompat.

- Specify OPT_MODULAR in the port Makefile instead of KERN_AS.

Now, KERN_AS=library is used for kernels without module(7) for all ports.

OK christos

branches: 1.21.16;
Declare dependency on fpsp.o via newly introduced ${MD_LIBS} instead of
${MD_OBJS}.

${MD_OBJS} should be used only for objects that must be linked first (i.e.,
start code). Objects have to be compiled following common compile rules,
and have to be generated into common places (i.e., top of kernel build
directory).

${MD_LIBS} defines libraries that are built by separate makefiles, under
separate directories. `Makefile.kern.inc' doesn't know intermediate library
objects.

branches: 1.20.14; 1.20.32;
Switch remaining platforms to modern CPP for assembler.

branches: 1.19.26; 1.19.32; 1.19.34;
Missing assym.h dependencies.

branches: 1.18.50; 1.18.70; 1.18.74;
merge ktrace-lwp.

branches: 1.17.2;
s/GENASSYM/GENASSYM_CONF/ so we can use "GENASSYM" as the program name.

Add the %MAKEOPTIONSAPPEND token at the end of the file, after the
common Makefile.kern.inc has been included.

branches: 1.15.6; 1.15.10;
The traditional C preprocessor is fixed in GCC 3.3 now, so no need
to skip -traditional-cpp for HAVE_GCC3.

Don't use -traditional-cpp if HAVE_GCC3.

branches: 1.13.8;
Roll the rest of the ports over to the new MI kernel build machinery.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.11.2;
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.

Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.

branches: 1.10.2;
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.

branches: 1.9.2;
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.

branches: 1.8.2;
delete obsolete comment

branches: 1.7.6;
Add "install" target, so "make install" after building the kernel
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.

HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.

Revert STRIPPROG -> STRIP

Add "dependall" target for comfort.

STRIP -> STRIPPROG

Change STRIPFLAGS=-g for cross-toolchains.

branches: 1.1.2;
Initial import of news68k port.