PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Adjust _all_ cinclude of *.local files

- Ensure always at end
- Use tab rather than spaces
- Add consistent comment
"Pull in optional local configuration - always at end"

The only functional change is that a local file which tried to
override an existing setting (eg with "no foo") would have failed
in some cases before, but now will work

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.53.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.52.2; 1.52.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.49.8;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.48.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

branches: 1.46.8;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.45.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.43.2; 1.43.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.41.2; 1.41.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.39.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.38.4; 1.38.10; 1.38.12;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.37.2; 1.37.6;
Use std.sh3eb and g/c local duplicates.

branches: 1.36.28; 1.36.34;
Switch the rest of sh3 ports to todr(9)
Split code to handle on-chip rtc into a separate driver
Eliminate all todr code from clock.c
Move __HAVE_GENERIC_TODR to sh3/include/types.h

Somehow I managed to forget to commit mmeye changes.
Pointed out by he@

branches: 1.35.2; 1.35.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.34.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.32.2; 1.32.4; 1.32.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.27.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.25.4; 1.25.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.22.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.20.2;
Bye Bye UCONSOLE

Add options BSDDISKLABEL_EI and options COMPAT_MMEYE_OLDLABEL.

track rev. 1.36 of GENERIC:
adapted to new interrupt code and shb changes.

also disable tlphy - no bus_dma, so it doesn't compile

g/c COMPAT_13 - there wasn't any 1.3 release of mmeye. According
to removal log of sys/arch/sh3/sh3/compat_13_machdep.c, COMPAT_13 was trace
of i386 port.

branches: 1.16.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

To determine CPU architecture and product, add cpu_arch and cpu_prduct variables.
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.7.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

fix shpcic* iomem size from 0x4000000 to 0x1000000

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.4.4;
Add (sometimes commented out) MIIVERBOSE option.

s/ECOFF/COFF/ (comment only)

branches: 1.2.2;
remove mainbus pseudo floppy drive

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Adjust _all_ cinclude of *.local files

- Ensure always at end
- Use tab rather than spaces
- Add consistent comment
"Pull in optional local configuration - always at end"

The only functional change is that a local file which tried to
override an existing setting (eg with "no foo") would have failed
in some cases before, but now will work

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.53.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.52.2; 1.52.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.49.8;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.48.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

branches: 1.46.8;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.45.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.43.2; 1.43.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.41.2; 1.41.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.39.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.38.4; 1.38.10; 1.38.12;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.37.2; 1.37.6;
Use std.sh3eb and g/c local duplicates.

branches: 1.36.28; 1.36.34;
Switch the rest of sh3 ports to todr(9)
Split code to handle on-chip rtc into a separate driver
Eliminate all todr code from clock.c
Move __HAVE_GENERIC_TODR to sh3/include/types.h

Somehow I managed to forget to commit mmeye changes.
Pointed out by he@

branches: 1.35.2; 1.35.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.34.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.32.2; 1.32.4; 1.32.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.27.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.25.4; 1.25.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.22.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.20.2;
Bye Bye UCONSOLE

Add options BSDDISKLABEL_EI and options COMPAT_MMEYE_OLDLABEL.

track rev. 1.36 of GENERIC:
adapted to new interrupt code and shb changes.

also disable tlphy - no bus_dma, so it doesn't compile

g/c COMPAT_13 - there wasn't any 1.3 release of mmeye. According
to removal log of sys/arch/sh3/sh3/compat_13_machdep.c, COMPAT_13 was trace
of i386 port.

branches: 1.16.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

To determine CPU architecture and product, add cpu_arch and cpu_prduct variables.
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.7.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

fix shpcic* iomem size from 0x4000000 to 0x1000000

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.4.4;
Add (sometimes commented out) MIIVERBOSE option.

s/ECOFF/COFF/ (comment only)

branches: 1.2.2;
remove mainbus pseudo floppy drive

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.52.2; 1.52.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.49.8;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.48.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

branches: 1.46.8;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.45.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.43.2; 1.43.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.41.2; 1.41.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.39.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.38.4; 1.38.10; 1.38.12;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.37.2; 1.37.6;
Use std.sh3eb and g/c local duplicates.

branches: 1.36.28; 1.36.34;
Switch the rest of sh3 ports to todr(9)
Split code to handle on-chip rtc into a separate driver
Eliminate all todr code from clock.c
Move __HAVE_GENERIC_TODR to sh3/include/types.h

Somehow I managed to forget to commit mmeye changes.
Pointed out by he@

branches: 1.35.2; 1.35.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.34.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.32.2; 1.32.4; 1.32.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.27.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.25.4; 1.25.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.22.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.20.2;
Bye Bye UCONSOLE

Add options BSDDISKLABEL_EI and options COMPAT_MMEYE_OLDLABEL.

track rev. 1.36 of GENERIC:
adapted to new interrupt code and shb changes.

also disable tlphy - no bus_dma, so it doesn't compile

g/c COMPAT_13 - there wasn't any 1.3 release of mmeye. According
to removal log of sys/arch/sh3/sh3/compat_13_machdep.c, COMPAT_13 was trace
of i386 port.

branches: 1.16.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

To determine CPU architecture and product, add cpu_arch and cpu_prduct variables.
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.7.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

fix shpcic* iomem size from 0x4000000 to 0x1000000

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.4.4;
Add (sometimes commented out) MIIVERBOSE option.

s/ECOFF/COFF/ (comment only)

branches: 1.2.2;
remove mainbus pseudo floppy drive

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.52.2;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.49.8;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.48.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

branches: 1.46.8;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.45.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.43.2; 1.43.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.41.2; 1.41.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.39.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.38.4; 1.38.10; 1.38.12;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.37.2; 1.37.6;
Use std.sh3eb and g/c local duplicates.

branches: 1.36.28; 1.36.34;
Switch the rest of sh3 ports to todr(9)
Split code to handle on-chip rtc into a separate driver
Eliminate all todr code from clock.c
Move __HAVE_GENERIC_TODR to sh3/include/types.h

Somehow I managed to forget to commit mmeye changes.
Pointed out by he@

branches: 1.35.2; 1.35.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.34.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.32.2; 1.32.4; 1.32.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.27.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.25.4; 1.25.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.22.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.20.2;
Bye Bye UCONSOLE

Add options BSDDISKLABEL_EI and options COMPAT_MMEYE_OLDLABEL.

track rev. 1.36 of GENERIC:
adapted to new interrupt code and shb changes.

also disable tlphy - no bus_dma, so it doesn't compile

g/c COMPAT_13 - there wasn't any 1.3 release of mmeye. According
to removal log of sys/arch/sh3/sh3/compat_13_machdep.c, COMPAT_13 was trace
of i386 port.

branches: 1.16.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

To determine CPU architecture and product, add cpu_arch and cpu_prduct variables.
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.7.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

fix shpcic* iomem size from 0x4000000 to 0x1000000

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.4.4;
Add (sometimes commented out) MIIVERBOSE option.

s/ECOFF/COFF/ (comment only)

branches: 1.2.2;
remove mainbus pseudo floppy drive

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.49.8;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.48.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

branches: 1.46.8;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.45.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.43.2; 1.43.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.41.2; 1.41.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.39.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.38.4; 1.38.10; 1.38.12;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.37.2; 1.37.6;
Use std.sh3eb and g/c local duplicates.

branches: 1.36.28; 1.36.34;
Switch the rest of sh3 ports to todr(9)
Split code to handle on-chip rtc into a separate driver
Eliminate all todr code from clock.c
Move __HAVE_GENERIC_TODR to sh3/include/types.h

Somehow I managed to forget to commit mmeye changes.
Pointed out by he@

branches: 1.35.2; 1.35.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.34.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.32.2; 1.32.4; 1.32.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.27.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.25.4; 1.25.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.22.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.20.2;
Bye Bye UCONSOLE

Add options BSDDISKLABEL_EI and options COMPAT_MMEYE_OLDLABEL.

track rev. 1.36 of GENERIC:
adapted to new interrupt code and shb changes.

also disable tlphy - no bus_dma, so it doesn't compile

g/c COMPAT_13 - there wasn't any 1.3 release of mmeye. According
to removal log of sys/arch/sh3/sh3/compat_13_machdep.c, COMPAT_13 was trace
of i386 port.

branches: 1.16.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

To determine CPU architecture and product, add cpu_arch and cpu_prduct variables.
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.7.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

fix shpcic* iomem size from 0x4000000 to 0x1000000

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.4.4;
Add (sometimes commented out) MIIVERBOSE option.

s/ECOFF/COFF/ (comment only)

branches: 1.2.2;
remove mainbus pseudo floppy drive

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.49.8;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.48.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

branches: 1.46.8;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.45.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.43.2; 1.43.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.41.2; 1.41.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.39.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.38.4; 1.38.10; 1.38.12;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.37.2; 1.37.6;
Use std.sh3eb and g/c local duplicates.

branches: 1.36.28; 1.36.34;
Switch the rest of sh3 ports to todr(9)
Split code to handle on-chip rtc into a separate driver
Eliminate all todr code from clock.c
Move __HAVE_GENERIC_TODR to sh3/include/types.h

Somehow I managed to forget to commit mmeye changes.
Pointed out by he@

branches: 1.35.2; 1.35.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.34.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.32.2; 1.32.4; 1.32.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.27.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.25.4; 1.25.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.22.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.20.2;
Bye Bye UCONSOLE

Add options BSDDISKLABEL_EI and options COMPAT_MMEYE_OLDLABEL.

track rev. 1.36 of GENERIC:
adapted to new interrupt code and shb changes.

also disable tlphy - no bus_dma, so it doesn't compile

g/c COMPAT_13 - there wasn't any 1.3 release of mmeye. According
to removal log of sys/arch/sh3/sh3/compat_13_machdep.c, COMPAT_13 was trace
of i386 port.

branches: 1.16.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.15.2; 1.15.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

To determine CPU architecture and product, add cpu_arch and cpu_prduct variables.
these are initialized by sh_cpu_init()@sh3/sh3_machdep.c
(see sh3/include/cputypes.h for detail.)
add "options SH3" for SH3 kernel config file.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.7.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

fix shpcic* iomem size from 0x4000000 to 0x1000000

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.4.4;
Add (sometimes commented out) MIIVERBOSE option.

s/ECOFF/COFF/ (comment only)

branches: 1.2.2;
remove mainbus pseudo floppy drive

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).