s/adressing/addressing/

Switch evbppc/ibm4xx to generic evbppc (same as oea) kernel modules.

I've confirmed that kernels similar to amd64/conf/MODULAR work fine
both on 403 and 405.

XXX
Unfortunately, we cannot immediately switch evbppc/booke to generic
kernel modules yet; it has its own intr.h implementation.

- Include tlb.h directly instead of uvm_extern.h.
- Remove unused/duplicated header include.
- Sort and group headers.

No binary changes.

Centralize cpu_reboot().

G/C bootpath.

branches: 1.12.2;
Reorder things in cpu_startup() for clarity.

No functional changes intended.

Invoke calc_delayconst() before read_eeprom(), which uses delay(9).

Fix unintended looong waiting time during boot.

branches: 1.10.12;
Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.9.38; 1.9.40;
Change read_eeprom(). We don't use bus_space(9) here. This is MD-part and,
don't support bus_space_unmap() to a space on reserved space?

Call bus_space_mallocok earlier. Moreover, don't bus_space_unmap call.

branches: 1.7.2; 1.7.6;
Change IBM4xx to use the common powerpc PIC framework.
Consolidate most ibm4xx initppc function into ibm4xx_init
and Make all IBM4xx use it.
Change explora to use initppc instead of bootstrap.

split device/softc (CFATTACH_DECL_NEW)
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.

lcsplx is dead. remove last vestiges of it.

for booke and ibm4xx evbppc systems, set module_machine to to either
"powerpc-ibm4xx" or "powerpc-booke".

branches: 1.3.2;
Need splraise(-1) here.

branches: 1.2.2; 1.2.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

branches: 1.1.2; 1.1.4; 1.1.6;
Support Plathome's OpenBlockS600.

Switch evbppc/ibm4xx to generic evbppc (same as oea) kernel modules.

I've confirmed that kernels similar to amd64/conf/MODULAR work fine
both on 403 and 405.

XXX
Unfortunately, we cannot immediately switch evbppc/booke to generic
kernel modules yet; it has its own intr.h implementation.

- Include tlb.h directly instead of uvm_extern.h.
- Remove unused/duplicated header include.
- Sort and group headers.

No binary changes.

Centralize cpu_reboot().

G/C bootpath.

branches: 1.12.2;
Reorder things in cpu_startup() for clarity.

No functional changes intended.

Invoke calc_delayconst() before read_eeprom(), which uses delay(9).

Fix unintended looong waiting time during boot.

branches: 1.10.12;
Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.9.38; 1.9.40;
Change read_eeprom(). We don't use bus_space(9) here. This is MD-part and,
don't support bus_space_unmap() to a space on reserved space?

Call bus_space_mallocok earlier. Moreover, don't bus_space_unmap call.

branches: 1.7.2; 1.7.6;
Change IBM4xx to use the common powerpc PIC framework.
Consolidate most ibm4xx initppc function into ibm4xx_init
and Make all IBM4xx use it.
Change explora to use initppc instead of bootstrap.

split device/softc (CFATTACH_DECL_NEW)
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.

lcsplx is dead. remove last vestiges of it.

for booke and ibm4xx evbppc systems, set module_machine to to either
"powerpc-ibm4xx" or "powerpc-booke".

branches: 1.3.2;
Need splraise(-1) here.

branches: 1.2.2; 1.2.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

branches: 1.1.2; 1.1.4; 1.1.6;
Support Plathome's OpenBlockS600.

- Include tlb.h directly instead of uvm_extern.h.
- Remove unused/duplicated header include.
- Sort and group headers.

No binary changes.

Centralize cpu_reboot().

G/C bootpath.

Reorder things in cpu_startup() for clarity.

No functional changes intended.

Invoke calc_delayconst() before read_eeprom(), which uses delay(9).

Fix unintended looong waiting time during boot.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.9.38; 1.9.40;
Change read_eeprom(). We don't use bus_space(9) here. This is MD-part and,
don't support bus_space_unmap() to a space on reserved space?

Call bus_space_mallocok earlier. Moreover, don't bus_space_unmap call.

branches: 1.7.2; 1.7.6;
Change IBM4xx to use the common powerpc PIC framework.
Consolidate most ibm4xx initppc function into ibm4xx_init
and Make all IBM4xx use it.
Change explora to use initppc instead of bootstrap.

split device/softc (CFATTACH_DECL_NEW)
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.

lcsplx is dead. remove last vestiges of it.

for booke and ibm4xx evbppc systems, set module_machine to to either
"powerpc-ibm4xx" or "powerpc-booke".

branches: 1.3.2;
Need splraise(-1) here.

branches: 1.2.2; 1.2.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

branches: 1.1.2; 1.1.4; 1.1.6;
Support Plathome's OpenBlockS600.

Reorder things in cpu_startup() for clarity.

No functional changes intended.

Invoke calc_delayconst() before read_eeprom(), which uses delay(9).

Fix unintended looong waiting time during boot.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.9.38; 1.9.40;
Change read_eeprom(). We don't use bus_space(9) here. This is MD-part and,
don't support bus_space_unmap() to a space on reserved space?

Call bus_space_mallocok earlier. Moreover, don't bus_space_unmap call.

branches: 1.7.2; 1.7.6;
Change IBM4xx to use the common powerpc PIC framework.
Consolidate most ibm4xx initppc function into ibm4xx_init
and Make all IBM4xx use it.
Change explora to use initppc instead of bootstrap.

split device/softc (CFATTACH_DECL_NEW)
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.

lcsplx is dead. remove last vestiges of it.

for booke and ibm4xx evbppc systems, set module_machine to to either
"powerpc-ibm4xx" or "powerpc-booke".

branches: 1.3.2;
Need splraise(-1) here.

branches: 1.2.2; 1.2.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

branches: 1.1.2; 1.1.4; 1.1.6;
Support Plathome's OpenBlockS600.

Invoke calc_delayconst() before read_eeprom(), which uses delay(9).

Fix unintended looong waiting time during boot.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.9.38; 1.9.40;
Change read_eeprom(). We don't use bus_space(9) here. This is MD-part and,
don't support bus_space_unmap() to a space on reserved space?

Call bus_space_mallocok earlier. Moreover, don't bus_space_unmap call.

branches: 1.7.2; 1.7.6;
Change IBM4xx to use the common powerpc PIC framework.
Consolidate most ibm4xx initppc function into ibm4xx_init
and Make all IBM4xx use it.
Change explora to use initppc instead of bootstrap.

split device/softc (CFATTACH_DECL_NEW)
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.

lcsplx is dead. remove last vestiges of it.

for booke and ibm4xx evbppc systems, set module_machine to to either
"powerpc-ibm4xx" or "powerpc-booke".

branches: 1.3.2;
Need splraise(-1) here.

branches: 1.2.2; 1.2.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

branches: 1.1.2; 1.1.4; 1.1.6;
Support Plathome's OpenBlockS600.

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.9.38;
Change read_eeprom(). We don't use bus_space(9) here. This is MD-part and,
don't support bus_space_unmap() to a space on reserved space?

Call bus_space_mallocok earlier. Moreover, don't bus_space_unmap call.

branches: 1.7.2; 1.7.6;
Change IBM4xx to use the common powerpc PIC framework.
Consolidate most ibm4xx initppc function into ibm4xx_init
and Make all IBM4xx use it.
Change explora to use initppc instead of bootstrap.

split device/softc (CFATTACH_DECL_NEW)
struct device * -> device_t
struct cfdata * -> cfdata_t
Use <sys/foo.h> instead of <machine/foo.h> if <sys/foo.h> exists
Explicitly include <powerpc/ibm4xx/cpu.h> when needed.

lcsplx is dead. remove last vestiges of it.

for booke and ibm4xx evbppc systems, set module_machine to to either
"powerpc-ibm4xx" or "powerpc-booke".

branches: 1.3.2;
Need splraise(-1) here.

branches: 1.2.2; 1.2.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

branches: 1.1.2; 1.1.4; 1.1.6;
Support Plathome's OpenBlockS600.