No need for SOC_VIRT, the default arm platform will take care of things.

arm: Need files.acpi for drm to discover NACPICA=0.

arm: rockchip: Add support for RK3288 SoC.

The Rockchip RK3288 is a quad core Cortex-A17 SoC.

Tidyup the i.MX SoC support by

- Moving the FDTised code to sys/arch/arm/nxp to match the
sys/arch/{cpu}/{vendor} convention
- FDTise some more drivers
- Secure Non-Volatile Storage
- watchdog driver
- On chip OTP
- Match fsl,imx6dl
- Add some more drivers to GENERIC that will be supported by i.MX 6
boards

branches: 1.10.2;
i.MX support merged into GENERIC kernel.

Adapt ti fdt glue to support GENERIC kernel.

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

branches: 1.7.2;
Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

arm: Need files.acpi for drm to discover NACPICA=0.

arm: rockchip: Add support for RK3288 SoC.

The Rockchip RK3288 is a quad core Cortex-A17 SoC.

Tidyup the i.MX SoC support by

- Moving the FDTised code to sys/arch/arm/nxp to match the
sys/arch/{cpu}/{vendor} convention
- FDTise some more drivers
- Secure Non-Volatile Storage
- watchdog driver
- On chip OTP
- Match fsl,imx6dl
- Add some more drivers to GENERIC that will be supported by i.MX 6
boards

branches: 1.10.2;
i.MX support merged into GENERIC kernel.

Adapt ti fdt glue to support GENERIC kernel.

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

branches: 1.7.2;
Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

arm: rockchip: Add support for RK3288 SoC.

The Rockchip RK3288 is a quad core Cortex-A17 SoC.

Tidyup the i.MX SoC support by

- Moving the FDTised code to sys/arch/arm/nxp to match the
sys/arch/{cpu}/{vendor} convention
- FDTise some more drivers
- Secure Non-Volatile Storage
- watchdog driver
- On chip OTP
- Match fsl,imx6dl
- Add some more drivers to GENERIC that will be supported by i.MX 6
boards

branches: 1.10.2;
i.MX support merged into GENERIC kernel.

Adapt ti fdt glue to support GENERIC kernel.

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

branches: 1.7.2;
Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

Tidyup the i.MX SoC support by

- Moving the FDTised code to sys/arch/arm/nxp to match the
sys/arch/{cpu}/{vendor} convention
- FDTise some more drivers
- Secure Non-Volatile Storage
- watchdog driver
- On chip OTP
- Match fsl,imx6dl
- Add some more drivers to GENERIC that will be supported by i.MX 6
boards

i.MX support merged into GENERIC kernel.

Adapt ti fdt glue to support GENERIC kernel.

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

branches: 1.7.2;
Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

i.MX support merged into GENERIC kernel.

Adapt ti fdt glue to support GENERIC kernel.

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

branches: 1.7.2;
Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

Adapt ti fdt glue to support GENERIC kernel.

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

branches: 1.7.2;
Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

Inlcude external/bsd/sljit/conf/files.sljit, so that it's possible to build
a kernel with options SLJIT

Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

Initial commit of FDTised Xilinx Zynq-7000 support. Tested with

qemu-system-arm -M xilinx-zynq-a9 -dtb zynq-zed.dtb -kernel netbsd.ub \
-serial /dev/null -serial stdio

Based on a set of diffs/files from rjs@

sys/arch/arm/zynq is kept in place to allow existing kernels (e.g.
ZEDBOARD and PARALLELLA) to continue to build/work during the transition,
but eventually sys/arch/arm/zynq will be deleted.

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

Merge the [pgoyette-compat] branch

Add support for (FDT-ized) Amlogic Meson8b.

Switch the DE0 Nano SoC to the GENERIC kernel.

Merge in VIRT now that qemu in pkgsrc can support it (missed in previous
commit)

Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.

The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.

The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.

Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!

The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.

Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively

branches: 1.1.2;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)