Increase maxusers to 64 for 64-bit kernels

Add support for PCI MSI using ARM GICv2m.

Fix a bug introduced in the previous revision;
We don't define arm32 anywhere, and majors.aarch64 is used unconditionally.

branches: 1.30.2;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

move "defparam opt_machdep.h BOOT_ARGS" to files.evbarm from various places

branches: 1.28.2;
Generalise FDT and OFW

Make opt_fdt.h available for all evbarm kernels.

Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.

branches: 1.25.10;
Drop the rest of the ARM specific MBR support.

Use MI MBR support code. Fixes disklabel writing problems during
sysinst.

branches: 1.23.6;
Always include disksubr_xxx

branches: 1.22.8; 1.22.18; 1.22.22;
Move 'include files.sdmmc' to files.evbarm.

branches: 1.21.4; 1.21.22; 1.21.24; 1.21.26;
Clean up for includes of board independent driver.

branches: 1.20.2; 1.20.6;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

branches: 1.19.10; 1.19.14;
include files.wsfb

branches: 1.18.26; 1.18.30; 1.18.32;
remove the COM_MPLOCK option. always include the spinlock in the softc
and always call the simple_* locking functions. the locking functions
are compiled out if they are not needed anyway, so a separate option
for this doesn't gain anything.

this also fixes the serial console on my alpha ES40 (which doesn't make much
sense since the com driver should still be under the big lock on alpha,
but whatever).

branches: 1.17.18;
files.ixp12x0
no need device ixpcom in evbarm/conf/files.evbarm move it to
arm/ixp12x0/files.ixp12x0

ixp12x0_com.c:
some fix around address handling
1. Do not call bus_space_map() in ixpcominit(). Calling bus_space_map()
is not safe here, because bus_space_map() calls uvm_km_valloc() but
uvm is not yet initialized.
2. Use dv_unit to determine console instead comparering iobase.
Now you can attach ixpcom0 with physical address like this:
ixpcom* at ixpsip? addr 0x90000000 size 0x4000
Statically mapped address (0xf0000000) is still usable.

ixp12x0_clk:
1. access PLL_CFG register via bus_space
2. Make the delay() working correctly. (bug fix)
3. Start the timer device without interrupt on attach time.
Now delay() called before cpu_initclocks() works fine.

ixp12x0_pci:
1.Mapping PCI type0/1 configuration space to the upper address.
2."PCI I/O Cycle Access" mapping to same virtual address(VA==PA)
but size of this mapping increase to 1MByte because fails
cause couldnt set L2 table.
3.use bus_space address handling in ixp12x0_pci.c.

now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

Add a new option EVBARM_BOARDTYPE to differentiate between different
evbarm ports. Inline _splraise/_spllower/splx for i80321 and iq80310
for more performance.

attach/match separated from ixp12x0_com
Some bug of com driver have been improved.

branches: 1.12.2;
* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

Use the MI md_root

branches: 1.10.2;
New interrupt framework for NetBSD/evbarm, and accompanying new
interrupt code for the IQ80310 board support package.

XXX The Integrator board support package still uses the old-style
arm32 interrupt code, so some compatibility hacks have been added
for it. When the Integrator uses new-style interrupts, those hacks
can go away.

Don't need pciide_machdep.c

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

Move the interrupt-related file declarations into port-specific
config descriptions so that each port choose whether or not to
use it.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

We need to declare the "plcom" device in files.evbarm, since a
"plcom.h" header file needs to be generated for conf.c even for
non-Integrator kernels.

branches: 1.4.2;
Garbage-collect a bunch of stuff that's not used/needed in
eval board environments.

Move board-specific config definitions into files.<board>, allowing
each board type to have its own device namespace.

Add Integrator files.

branches: 1.1.4;
more evbarm files (very incomplete).

Add support for PCI MSI using ARM GICv2m.

Fix a bug introduced in the previous revision;
We don't define arm32 anywhere, and majors.aarch64 is used unconditionally.

Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

move "defparam opt_machdep.h BOOT_ARGS" to files.evbarm from various places

branches: 1.28.2;
Generalise FDT and OFW

Make opt_fdt.h available for all evbarm kernels.

Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.

branches: 1.25.10;
Drop the rest of the ARM specific MBR support.

Use MI MBR support code. Fixes disklabel writing problems during
sysinst.

branches: 1.23.6;
Always include disksubr_xxx

branches: 1.22.8; 1.22.18; 1.22.22;
Move 'include files.sdmmc' to files.evbarm.

branches: 1.21.4; 1.21.22; 1.21.24; 1.21.26;
Clean up for includes of board independent driver.

branches: 1.20.2; 1.20.6;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

branches: 1.19.10; 1.19.14;
include files.wsfb

branches: 1.18.26; 1.18.30; 1.18.32;
remove the COM_MPLOCK option. always include the spinlock in the softc
and always call the simple_* locking functions. the locking functions
are compiled out if they are not needed anyway, so a separate option
for this doesn't gain anything.

this also fixes the serial console on my alpha ES40 (which doesn't make much
sense since the com driver should still be under the big lock on alpha,
but whatever).

branches: 1.17.18;
files.ixp12x0
no need device ixpcom in evbarm/conf/files.evbarm move it to
arm/ixp12x0/files.ixp12x0

ixp12x0_com.c:
some fix around address handling
1. Do not call bus_space_map() in ixpcominit(). Calling bus_space_map()
is not safe here, because bus_space_map() calls uvm_km_valloc() but
uvm is not yet initialized.
2. Use dv_unit to determine console instead comparering iobase.
Now you can attach ixpcom0 with physical address like this:
ixpcom* at ixpsip? addr 0x90000000 size 0x4000
Statically mapped address (0xf0000000) is still usable.

ixp12x0_clk:
1. access PLL_CFG register via bus_space
2. Make the delay() working correctly. (bug fix)
3. Start the timer device without interrupt on attach time.
Now delay() called before cpu_initclocks() works fine.

ixp12x0_pci:
1.Mapping PCI type0/1 configuration space to the upper address.
2."PCI I/O Cycle Access" mapping to same virtual address(VA==PA)
but size of this mapping increase to 1MByte because fails
cause couldnt set L2 table.
3.use bus_space address handling in ixp12x0_pci.c.

now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

Add a new option EVBARM_BOARDTYPE to differentiate between different
evbarm ports. Inline _splraise/_spllower/splx for i80321 and iq80310
for more performance.

attach/match separated from ixp12x0_com
Some bug of com driver have been improved.

branches: 1.12.2;
* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

Use the MI md_root

branches: 1.10.2;
New interrupt framework for NetBSD/evbarm, and accompanying new
interrupt code for the IQ80310 board support package.

XXX The Integrator board support package still uses the old-style
arm32 interrupt code, so some compatibility hacks have been added
for it. When the Integrator uses new-style interrupts, those hacks
can go away.

Don't need pciide_machdep.c

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

Move the interrupt-related file declarations into port-specific
config descriptions so that each port choose whether or not to
use it.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

We need to declare the "plcom" device in files.evbarm, since a
"plcom.h" header file needs to be generated for conf.c even for
non-Integrator kernels.

branches: 1.4.2;
Garbage-collect a bunch of stuff that's not used/needed in
eval board environments.

Move board-specific config definitions into files.<board>, allowing
each board type to have its own device namespace.

Add Integrator files.

branches: 1.1.4;
more evbarm files (very incomplete).

Generalise FDT and OFW

Make opt_fdt.h available for all evbarm kernels.

Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.

branches: 1.25.10;
Drop the rest of the ARM specific MBR support.

Use MI MBR support code. Fixes disklabel writing problems during
sysinst.

branches: 1.23.6;
Always include disksubr_xxx

branches: 1.22.8; 1.22.18; 1.22.22;
Move 'include files.sdmmc' to files.evbarm.

branches: 1.21.4; 1.21.22; 1.21.24; 1.21.26;
Clean up for includes of board independent driver.

branches: 1.20.2; 1.20.6;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

branches: 1.19.10; 1.19.14;
include files.wsfb

branches: 1.18.26; 1.18.30; 1.18.32;
remove the COM_MPLOCK option. always include the spinlock in the softc
and always call the simple_* locking functions. the locking functions
are compiled out if they are not needed anyway, so a separate option
for this doesn't gain anything.

this also fixes the serial console on my alpha ES40 (which doesn't make much
sense since the com driver should still be under the big lock on alpha,
but whatever).

branches: 1.17.18;
files.ixp12x0
no need device ixpcom in evbarm/conf/files.evbarm move it to
arm/ixp12x0/files.ixp12x0

ixp12x0_com.c:
some fix around address handling
1. Do not call bus_space_map() in ixpcominit(). Calling bus_space_map()
is not safe here, because bus_space_map() calls uvm_km_valloc() but
uvm is not yet initialized.
2. Use dv_unit to determine console instead comparering iobase.
Now you can attach ixpcom0 with physical address like this:
ixpcom* at ixpsip? addr 0x90000000 size 0x4000
Statically mapped address (0xf0000000) is still usable.

ixp12x0_clk:
1. access PLL_CFG register via bus_space
2. Make the delay() working correctly. (bug fix)
3. Start the timer device without interrupt on attach time.
Now delay() called before cpu_initclocks() works fine.

ixp12x0_pci:
1.Mapping PCI type0/1 configuration space to the upper address.
2."PCI I/O Cycle Access" mapping to same virtual address(VA==PA)
but size of this mapping increase to 1MByte because fails
cause couldnt set L2 table.
3.use bus_space address handling in ixp12x0_pci.c.

now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

Add a new option EVBARM_BOARDTYPE to differentiate between different
evbarm ports. Inline _splraise/_spllower/splx for i80321 and iq80310
for more performance.

attach/match separated from ixp12x0_com
Some bug of com driver have been improved.

branches: 1.12.2;
* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

Use the MI md_root

branches: 1.10.2;
New interrupt framework for NetBSD/evbarm, and accompanying new
interrupt code for the IQ80310 board support package.

XXX The Integrator board support package still uses the old-style
arm32 interrupt code, so some compatibility hacks have been added
for it. When the Integrator uses new-style interrupts, those hacks
can go away.

Don't need pciide_machdep.c

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

Move the interrupt-related file declarations into port-specific
config descriptions so that each port choose whether or not to
use it.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

We need to declare the "plcom" device in files.evbarm, since a
"plcom.h" header file needs to be generated for conf.c even for
non-Integrator kernels.

branches: 1.4.2;
Garbage-collect a bunch of stuff that's not used/needed in
eval board environments.

Move board-specific config definitions into files.<board>, allowing
each board type to have its own device namespace.

Add Integrator files.

branches: 1.1.4;
more evbarm files (very incomplete).