Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

G/C "MAPPECOPY". It is the deadest of wood, and never actually worked in
NetBSD.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.69.2; 1.69.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 2.

branches: 1.65.2; 1.65.12;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.61.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.60.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.59.4;
the bogus number police

remove confusing numeric locators where they are unused.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.56.2;
P1003_1B_SEMAPHORE is no longer optional.

branches: 1.55.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.54.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.53.2; 1.53.4; 1.53.6;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.52.4;
add COMPAT_50 to all the configs with COMPAT_40.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.50.2;
Add accept filters to GENERIC kernels where they exist.

branches: 1.49.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.48.6; 1.48.8; 1.48.10; 1.48.12;
Remove systrace. Ok core@.

branches: 1.47.2; 1.47.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

branches: 1.46.8; 1.46.26; 1.46.28; 1.46.32;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.45.2; 1.45.4;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.43.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.42.2; 1.42.10;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.40.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.39.2; 1.39.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

branches: 1.31.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.29.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.20.2;
add COMPAT_15/COMPAT_16

branches: 1.19.2;
Add pseudo-device ksyms.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.11.2; 1.11.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.5.6;
Add bridge pseudo devices to GENERIC configs

add COMPAT_AOUT_M68K stuff.

branches: 1.3.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Initial import of the known working kernel bits for the NetBSD/cesfic
port. cesfic is a VME board with one or two mc68040 processors. See
the README file for details.
The port is working well with a.out userland, there are some problems
with ELF still, like applications running out of memory where it is not
expected. Some parts, in particular the pmap (which was taken from hp300
four years ago), need updating, but this is easier done within the NetBSD
CVS tree.

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

G/C "MAPPECOPY". It is the deadest of wood, and never actually worked in
NetBSD.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.69.2; 1.69.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 2.

branches: 1.65.2; 1.65.12;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.61.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.60.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.59.4;
the bogus number police

remove confusing numeric locators where they are unused.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.56.2;
P1003_1B_SEMAPHORE is no longer optional.

branches: 1.55.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.54.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.53.2; 1.53.4; 1.53.6;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.52.4;
add COMPAT_50 to all the configs with COMPAT_40.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.50.2;
Add accept filters to GENERIC kernels where they exist.

branches: 1.49.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.48.6; 1.48.8; 1.48.10; 1.48.12;
Remove systrace. Ok core@.

branches: 1.47.2; 1.47.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

branches: 1.46.8; 1.46.26; 1.46.28; 1.46.32;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.45.2; 1.45.4;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.43.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.42.2; 1.42.10;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.40.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.39.2; 1.39.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

branches: 1.31.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.29.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.20.2;
add COMPAT_15/COMPAT_16

branches: 1.19.2;
Add pseudo-device ksyms.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.11.2; 1.11.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.5.6;
Add bridge pseudo devices to GENERIC configs

add COMPAT_AOUT_M68K stuff.

branches: 1.3.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Initial import of the known working kernel bits for the NetBSD/cesfic
port. cesfic is a VME board with one or two mc68040 processors. See
the README file for details.
The port is working well with a.out userland, there are some problems
with ELF still, like applications running out of memory where it is not
expected. Some parts, in particular the pmap (which was taken from hp300
four years ago), need updating, but this is easier done within the NetBSD
CVS tree.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

G/C "MAPPECOPY". It is the deadest of wood, and never actually worked in
NetBSD.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.69.2; 1.69.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 2.

branches: 1.65.2; 1.65.12;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.61.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.60.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.59.4;
the bogus number police

remove confusing numeric locators where they are unused.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.56.2;
P1003_1B_SEMAPHORE is no longer optional.

branches: 1.55.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.54.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.53.2; 1.53.4; 1.53.6;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.52.4;
add COMPAT_50 to all the configs with COMPAT_40.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.50.2;
Add accept filters to GENERIC kernels where they exist.

branches: 1.49.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.48.6; 1.48.8; 1.48.10; 1.48.12;
Remove systrace. Ok core@.

branches: 1.47.2; 1.47.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

branches: 1.46.8; 1.46.26; 1.46.28; 1.46.32;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.45.2; 1.45.4;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.43.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.42.2; 1.42.10;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.40.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.39.2; 1.39.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

branches: 1.31.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.29.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.20.2;
add COMPAT_15/COMPAT_16

branches: 1.19.2;
Add pseudo-device ksyms.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.11.2; 1.11.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.5.6;
Add bridge pseudo devices to GENERIC configs

add COMPAT_AOUT_M68K stuff.

branches: 1.3.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Initial import of the known working kernel bits for the NetBSD/cesfic
port. cesfic is a VME board with one or two mc68040 processors. See
the README file for details.
The port is working well with a.out userland, there are some problems
with ELF still, like applications running out of memory where it is not
expected. Some parts, in particular the pmap (which was taken from hp300
four years ago), need updating, but this is easier done within the NetBSD
CVS tree.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

G/C "MAPPECOPY". It is the deadest of wood, and never actually worked in
NetBSD.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.69.2; 1.69.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 2.

branches: 1.65.2; 1.65.12;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.61.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.60.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.59.4;
the bogus number police

remove confusing numeric locators where they are unused.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.56.2;
P1003_1B_SEMAPHORE is no longer optional.

branches: 1.55.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.54.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.53.2; 1.53.4; 1.53.6;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.52.4;
add COMPAT_50 to all the configs with COMPAT_40.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.50.2;
Add accept filters to GENERIC kernels where they exist.

branches: 1.49.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.48.6; 1.48.8; 1.48.10; 1.48.12;
Remove systrace. Ok core@.

branches: 1.47.2; 1.47.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

branches: 1.46.8; 1.46.26; 1.46.28; 1.46.32;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.45.2; 1.45.4;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.43.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.42.2; 1.42.10;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.40.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.39.2; 1.39.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

branches: 1.31.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.29.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.20.2;
add COMPAT_15/COMPAT_16

branches: 1.19.2;
Add pseudo-device ksyms.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.11.2; 1.11.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.5.6;
Add bridge pseudo devices to GENERIC configs

add COMPAT_AOUT_M68K stuff.

branches: 1.3.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Initial import of the known working kernel bits for the NetBSD/cesfic
port. cesfic is a VME board with one or two mc68040 processors. See
the README file for details.
The port is working well with a.out userland, there are some problems
with ELF still, like applications running out of memory where it is not
expected. Some parts, in particular the pmap (which was taken from hp300
four years ago), need updating, but this is easier done within the NetBSD
CVS tree.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

G/C "MAPPECOPY". It is the deadest of wood, and never actually worked in
NetBSD.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.69.2; 1.69.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 2.

branches: 1.65.2; 1.65.12;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.61.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.60.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.59.4;
the bogus number police

remove confusing numeric locators where they are unused.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.56.2;
P1003_1B_SEMAPHORE is no longer optional.

branches: 1.55.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.54.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.53.2; 1.53.4; 1.53.6;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.52.4;
add COMPAT_50 to all the configs with COMPAT_40.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.50.2;
Add accept filters to GENERIC kernels where they exist.

branches: 1.49.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.48.6; 1.48.8; 1.48.10; 1.48.12;
Remove systrace. Ok core@.

branches: 1.47.2; 1.47.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

branches: 1.46.8; 1.46.26; 1.46.28; 1.46.32;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.45.2; 1.45.4;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.43.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.42.2; 1.42.10;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.40.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.39.2; 1.39.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

branches: 1.31.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.29.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.20.2;
add COMPAT_15/COMPAT_16

branches: 1.19.2;
Add pseudo-device ksyms.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.11.2; 1.11.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.5.6;
Add bridge pseudo devices to GENERIC configs

add COMPAT_AOUT_M68K stuff.

branches: 1.3.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Initial import of the known working kernel bits for the NetBSD/cesfic
port. cesfic is a VME board with one or two mc68040 processors. See
the README file for details.
The port is working well with a.out userland, there are some problems
with ELF still, like applications running out of memory where it is not
expected. Some parts, in particular the pmap (which was taken from hp300
four years ago), need updating, but this is easier done within the NetBSD
CVS tree.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

G/C "MAPPECOPY". It is the deadest of wood, and never actually worked in
NetBSD.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.69.2; 1.69.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 2.

branches: 1.65.2; 1.65.12;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.61.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.60.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.59.4;
the bogus number police

remove confusing numeric locators where they are unused.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.56.2;
P1003_1B_SEMAPHORE is no longer optional.

branches: 1.55.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.54.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.53.2; 1.53.4; 1.53.6;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.