bump bebox and prep image sizes for GCC 9.

Remove "options IPKDB", and the other associated options, from the config
files.

ipkdb is being retired. Its code is really old, and hasn't kept pace with
today's expectations: IPv6, SMP, modern NICs. The associated code for x86
was already removed because it was too incorrect to stay.

There are plans to rewrite a similar feature from scratch.

ok kamil christos

Remove "options DEBUG_BY_TOOLS", it doesn't exist.

branches: 1.62.2; 1.62.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.59.2;
wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.56.2; 1.56.4;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).

Remove "options IPKDB", and the other associated options, from the config
files.

ipkdb is being retired. Its code is really old, and hasn't kept pace with
today's expectations: IPv6, SMP, modern NICs. The associated code for x86
was already removed because it was too incorrect to stay.

There are plans to rewrite a similar feature from scratch.

ok kamil christos

Remove "options DEBUG_BY_TOOLS", it doesn't exist.

branches: 1.62.2;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.59.2;
wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.56.2; 1.56.4;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.59.2;
wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.56.2; 1.56.4;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).

Remove TCP_COMPAT_42 from the config files. Pass 3.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.59.2;
wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.56.2; 1.56.4;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.56.2; 1.56.4;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).

wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).