Specify options FONT_VT220L8x16 to get similar glyphs as past font_8x16.c.

Add pms(4), wsmouse(4), and wsmux(4) for Milan.

branches: 1.28.4;
Restore piixide(4) for Milan and disable other pciide devices.

piixide was removed in rev 1.18 and the log message said
"because Intel IDE disk controllers only exist as part of
Intel chipsets for x86 systems" but the Milan actually has
the Intel 82371FB southbridge on its board.
Other pciide devices are unlikely necessary for the default
kernel for such a rare machine.
Also fix pasto in comment.

branches: 1.27.20;
Enable options WSDISPLAY_COMPAT_USL in template, not in generated files.

branches: 1.26.2; 1.26.12;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.25.8; 1.25.14;
Remove EtherNEC from HADES and MILAN.
They have ISA so no one will bother to connect ISA NE2000 via EtherNEC.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

Fix typo in comments, no code change.

- Merge ATARITT.in and FALCON.in into GENERIC.in so we can generate
a sane kernel config which defines both of them
- Cleanup all the #if defined(FOO) entries to be consistent and have
a matching /* FOO */ on the #endif line
- No change to generated ATARITT/FALCON/HADES/MILAN-ISAIDE/MILAN-PCIIDE
- Rename BOOT to SMALL030 and trim a little more to save space.
- Drop BOOTX

branches: 1.21.60; 1.21.68; 1.21.70;
Nothing in the kernel now tests __HAVE_NWSCONS, so stop defining it everywhere.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

branches: 1.19.4; 1.19.6; 1.19.8; 1.19.10; 1.19.12;
merge ktrace-lwp.

branches: 1.18.2;
Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

branches: 1.17.10;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

branches: 1.16.4;
Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Collapse the atabus declaration into "atabus* at ata? channel ?".

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Add new per-chip pciide drivers.

Add atabus.

branches: 1.11.6;
Make things work with the new autoconf stuff:
- The pcibus is now called 'pcib' and the isabus 'isab'. Their attributes are
'pcibus' and 'isabus' respectively. This makes the underlying busses
attach again.
- Initialize the parent structure in the config_console() function.
Otherwise we end up without a console.

Avoid using variable names in the comments. They turn into useless '1' values
if defined.

Add the nvram device. It really is the same as on the other machines and
installboot(1M) needs it.

branches: 1.8.8; 1.8.10;
cleanup whitespace

branches: 1.7.6;
Various typos in comments (neccessary, sceme, choise, ...).

branches: 1.6.2; 1.6.4;
Everything you always wanted to know about Atari,Milan,IDE and byteswaps...
The Milan configuration is split up in 2 parts:
- MILAN_ISAIDE
Supports the traditionally formatted IDE disks on the Milan
- MILAN_PCIIDE
Supports the byte swapped formatted IDE disks on the Milan

If you want to read more, checkout the comment in MILAN.in...

Move over to pciide. My CDROM drive wouldn't work with the wdcisa attachment,
but it does work with the pciide attachment.

Without __HAVE_NWSCONS, the keyboard won't attach...

Fix errors in previous commit:
- forgot PCI bus
- forgot pckbd config

Add (ws)console stuff.

branches: 1.1.2;
Add a config file for the Milan. Note that you cannot build a working Milan
kernel yet. There are still quite some bits missing in the repository.

Add pms(4), wsmouse(4), and wsmux(4) for Milan.

Restore piixide(4) for Milan and disable other pciide devices.

piixide was removed in rev 1.18 and the log message said
"because Intel IDE disk controllers only exist as part of
Intel chipsets for x86 systems" but the Milan actually has
the Intel 82371FB southbridge on its board.
Other pciide devices are unlikely necessary for the default
kernel for such a rare machine.
Also fix pasto in comment.

branches: 1.27.20;
Enable options WSDISPLAY_COMPAT_USL in template, not in generated files.

branches: 1.26.2; 1.26.12;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.25.8; 1.25.14;
Remove EtherNEC from HADES and MILAN.
They have ISA so no one will bother to connect ISA NE2000 via EtherNEC.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

Fix typo in comments, no code change.

- Merge ATARITT.in and FALCON.in into GENERIC.in so we can generate
a sane kernel config which defines both of them
- Cleanup all the #if defined(FOO) entries to be consistent and have
a matching /* FOO */ on the #endif line
- No change to generated ATARITT/FALCON/HADES/MILAN-ISAIDE/MILAN-PCIIDE
- Rename BOOT to SMALL030 and trim a little more to save space.
- Drop BOOTX

branches: 1.21.60; 1.21.68; 1.21.70;
Nothing in the kernel now tests __HAVE_NWSCONS, so stop defining it everywhere.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

branches: 1.19.4; 1.19.6; 1.19.8; 1.19.10; 1.19.12;
merge ktrace-lwp.

branches: 1.18.2;
Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

branches: 1.17.10;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

branches: 1.16.4;
Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Collapse the atabus declaration into "atabus* at ata? channel ?".

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Add new per-chip pciide drivers.

Add atabus.

branches: 1.11.6;
Make things work with the new autoconf stuff:
- The pcibus is now called 'pcib' and the isabus 'isab'. Their attributes are
'pcibus' and 'isabus' respectively. This makes the underlying busses
attach again.
- Initialize the parent structure in the config_console() function.
Otherwise we end up without a console.

Avoid using variable names in the comments. They turn into useless '1' values
if defined.

Add the nvram device. It really is the same as on the other machines and
installboot(1M) needs it.

branches: 1.8.8; 1.8.10;
cleanup whitespace

branches: 1.7.6;
Various typos in comments (neccessary, sceme, choise, ...).

branches: 1.6.2; 1.6.4;
Everything you always wanted to know about Atari,Milan,IDE and byteswaps...
The Milan configuration is split up in 2 parts:
- MILAN_ISAIDE
Supports the traditionally formatted IDE disks on the Milan
- MILAN_PCIIDE
Supports the byte swapped formatted IDE disks on the Milan

If you want to read more, checkout the comment in MILAN.in...

Move over to pciide. My CDROM drive wouldn't work with the wdcisa attachment,
but it does work with the pciide attachment.

Without __HAVE_NWSCONS, the keyboard won't attach...

Fix errors in previous commit:
- forgot PCI bus
- forgot pckbd config

Add (ws)console stuff.

branches: 1.1.2;
Add a config file for the Milan. Note that you cannot build a working Milan
kernel yet. There are still quite some bits missing in the repository.

Restore piixide(4) for Milan and disable other pciide devices.

piixide was removed in rev 1.18 and the log message said
"because Intel IDE disk controllers only exist as part of
Intel chipsets for x86 systems" but the Milan actually has
the Intel 82371FB southbridge on its board.
Other pciide devices are unlikely necessary for the default
kernel for such a rare machine.
Also fix pasto in comment.

Enable options WSDISPLAY_COMPAT_USL in template, not in generated files.

branches: 1.26.2; 1.26.12;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.25.8; 1.25.14;
Remove EtherNEC from HADES and MILAN.
They have ISA so no one will bother to connect ISA NE2000 via EtherNEC.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

Fix typo in comments, no code change.

- Merge ATARITT.in and FALCON.in into GENERIC.in so we can generate
a sane kernel config which defines both of them
- Cleanup all the #if defined(FOO) entries to be consistent and have
a matching /* FOO */ on the #endif line
- No change to generated ATARITT/FALCON/HADES/MILAN-ISAIDE/MILAN-PCIIDE
- Rename BOOT to SMALL030 and trim a little more to save space.
- Drop BOOTX

branches: 1.21.60; 1.21.68; 1.21.70;
Nothing in the kernel now tests __HAVE_NWSCONS, so stop defining it everywhere.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

branches: 1.19.4; 1.19.6; 1.19.8; 1.19.10; 1.19.12;
merge ktrace-lwp.

branches: 1.18.2;
Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

branches: 1.17.10;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

branches: 1.16.4;
Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Collapse the atabus declaration into "atabus* at ata? channel ?".

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Add new per-chip pciide drivers.

Add atabus.

branches: 1.11.6;
Make things work with the new autoconf stuff:
- The pcibus is now called 'pcib' and the isabus 'isab'. Their attributes are
'pcibus' and 'isabus' respectively. This makes the underlying busses
attach again.
- Initialize the parent structure in the config_console() function.
Otherwise we end up without a console.

Avoid using variable names in the comments. They turn into useless '1' values
if defined.

Add the nvram device. It really is the same as on the other machines and
installboot(1M) needs it.

branches: 1.8.8; 1.8.10;
cleanup whitespace

branches: 1.7.6;
Various typos in comments (neccessary, sceme, choise, ...).

branches: 1.6.2; 1.6.4;
Everything you always wanted to know about Atari,Milan,IDE and byteswaps...
The Milan configuration is split up in 2 parts:
- MILAN_ISAIDE
Supports the traditionally formatted IDE disks on the Milan
- MILAN_PCIIDE
Supports the byte swapped formatted IDE disks on the Milan

If you want to read more, checkout the comment in MILAN.in...

Move over to pciide. My CDROM drive wouldn't work with the wdcisa attachment,
but it does work with the pciide attachment.

Without __HAVE_NWSCONS, the keyboard won't attach...

Fix errors in previous commit:
- forgot PCI bus
- forgot pckbd config

Add (ws)console stuff.

branches: 1.1.2;
Add a config file for the Milan. Note that you cannot build a working Milan
kernel yet. There are still quite some bits missing in the repository.