PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Driver for DaynaPORT SCSI/Link (dse.4).

Written by Hiroshi Noguchi, of which an updated version was posted to
port-mac68k in 2001.

Attachments were added to kernel configs for platforms that already had
the Cabletron (se.4) driver added, although other platorms may benefit.

Reviewed on tech-net by Izumi Tsutsui.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Allocalte enough reserved ST-RAM to make the old Xserver work by default.

Instead, check ST-RAM size and TT-RAM size on startup and restrict
size of reserved ST memory on lower RAM machines.
Closes PR port-atari/41002 from David Ross.

While here, make options ST_POOL_SIZE defparam'ed to make sure to
reflect config(5) changes on each build.

Specify -fno-unwind-tables to shrink binaries.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.120.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

branches: 1.118.4;
Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.115.2; 1.115.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.112.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.109.2; 1.109.4;
Shrink GENERIC and enable options MODULAR instead, as other poor m68k ports.

This allows all (at least ATARITT and FALCON, which have certain users)
gzipped kernel binaries put into 1440KB 2HD floppy so that users can
load these kernels on the native TOS using LOADBSD.TTP utility for
installation. Note SMALL030 kernel doesn't include any Ethernet
configuration and requires CD-ROM or other removable disks.

Should be pulled up to netbsd-7.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.106.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except SMALL030_KERNEL.

Also remove COPTS="-Os" from std.* files and specify it in
GENERIC.in template for SMALL030_KERNEL.

branches: 1.105.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.104.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.98.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Drop makeoptions COPTS=-Os for the SMALL030 kernel now that std.atari
contains it.

branches: 1.95.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.94.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.92.2; 1.92.4;
Rename device name of Crazy Dots II ET4000 video from et(4) to et4k(4)
to deliver the name to recently committed newer and more common MI device,
et(4) at PCIe (Agere ET1310/ET1301 network driver) in PR kern/39094.
http://mail-index.NetBSD.org/source-changes/2010/11/13/msg014416.html

No particular reaction for a month on source-changes-d@,
no responsible person on atari port, and probably
no active user still using ET4000 on TT030 running NetBSD/atari.

Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

- don't enable TMPFS for SMALL030
- remove dup PTYFS

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

Disable options SERCONSOLE (force serial console if DCD is detected)
because now it's patchable by binpatch(8).

Enabling serial console by DCD signal could be problematic
on some earlier TT030 (with revision A board), and it's also
annoying for users who connect an active device on the serial port
as mentioned in PR port-atari/39849.

XXX: Eventually serial console should be enabled by MD bootloader flags,
XXX: but I have no idea how to build bootloader binaries for TOS.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

branches: 1.84.2;
Add support for the SMC Elite Ultra Ethernet with the SMC_TT VME-ISA bridge.

The SMC_TT is the user designed "handmade" VME-ISA bridge circuit
for 16 bit VME slot on TT030 and the SMC Elite Ultra ISA Ethernet card.
More information about SMC_TT can be found in the following archive:
ftp://ftp.funet.fi/pub/atari/net/smc_tt1.zip

Demonstrated on the NetBSD booth in Open Source Conference 2010 Kansai@Kobe.

Add pseudo-device ksyms. Noticed by David Ross on port-atari.

branches: 1.82.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Do not include FPU_EMULATE in ATARITT only config

Shuffle some things around and comment out some options to try to ensure
we can fit a gzipped SMALL030 on a 720K floppy and FALCON / ATARITT on
1.44MB ones

branches: 1.79.2;
add COMPAT_50 to all the configs with COMPAT_40.

- Merge ATARITT.in and FALCON.in into GENERIC.in so we can generate
a sane kernel config which defines both of them
- Cleanup all the #if defined(FOO) entries to be consistent and have
a matching /* FOO */ on the #endif line
- No change to generated ATARITT/FALCON/HADES/MILAN-ISAIDE/MILAN-PCIIDE
- Rename BOOT to SMALL030 and trim a little more to save space.
- Drop BOOTX

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Increase min ST_POOL_SIZE from 22 to 24 to avoid out of ST memory issues. Tested by Tuomo

Enable 68060 support in FALCON & BOOTX kernels for CT60/63 upgrades
Drop KERNFS from INSTALL kernels
Drop 68040 support from ATARITT kernels

Add a note that SERCONSOLE breaks on the Falcon, and remove from
FALCON config.

branches: 1.73.2; 1.73.4;
Move "options WAPBL" so that it also gets added to INSTALL kernels.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.71.6; 1.71.10; 1.71.12; 1.71.16;
Remove systrace. Ok core@.

branches: 1.70.2; 1.70.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.68.2; 1.68.6;
Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.67.2; 1.67.4; 1.67.8;
The COMPAT_AOUT_M68K option now requies COMPAT_40 after the changes
to mount(), so define COMPAT_40 too.

Add pseudo-device agr

branches: 1.65.2; 1.65.8; 1.65.10; 1.65.16; 1.65.18;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.64.2; 1.64.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.62.2;
Add CARP to further platforms

ok christos, julian coleman and matthew green

branches: 1.61.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.60.2; 1.60.4; 1.60.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.58.2;
Add uncommented file-system UDF for generated config GENERIC files.

branches: 1.57.2; 1.57.4;
merge ktrace-lwp.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.49.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.47.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.42.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.41.4;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.33.2;
add COMPAT_15/COMPAT_16

branches: 1.32.2;
Bye Bye UCONSOLE

Add support for wsdisplay and wskbd for HADES.
Add config option for et4000 with 2MB memory.

Since 1.6 we have 3 images (not 2!):
- 1Mb on HD floppy's
- 1.44Mb on HD floppy's
- 1.44Mb on a DD floppy

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added a commented out cgd(4).

add SYSTRACE here; pointed out by lukem

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF

Introduce NO_PHYS_NETWORK as a define in the FALCON kernel. This define is
used to turn off the vlan, bridge and pppoe pseudo devices and the NETATALK
protocol.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

Remove the 'ex at pci' driver. The ex driver does not work with the
3c900-COMBO card at the moment. Something is wrong with DMA.

branches: 1.19.2; 1.19.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Don't include pppoe in FALCON kernels, since they don't include any Ethernet
devices.

Move USERCONF to GENERIC.in and trim the phy-list.

Oops, remove some unintended changes.

Add some PCI ethernet/audio cards for the Hades and the Milan.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup whitespace

branches: 1.9.4;
Now the default ecexutable is ELF.
Add COMPAT_AOUT_M68K to GENERIC options.

branches: 1.8.2;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.6.2;
Remove Ident.

Add SysV Semaphore tunables.

Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

branches: 1.3.2;
Fix various misspellings of compatible/compatibility.

branches: 1.2.2;
The Hades also uses the TT030 like SCSI driver. Remove 'mouse' here...

Move GENERIC to GENERIC.in . This avoids confusion since GENERIC is not a
standalone config file anymore.

Driver for DaynaPORT SCSI/Link (dse.4).

Written by Hiroshi Noguchi, of which an updated version was posted to
port-mac68k in 2001.

Attachments were added to kernel configs for platforms that already had
the Cabletron (se.4) driver added, although other platorms may benefit.

Reviewed on tech-net by Izumi Tsutsui.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Allocalte enough reserved ST-RAM to make the old Xserver work by default.

Instead, check ST-RAM size and TT-RAM size on startup and restrict
size of reserved ST memory on lower RAM machines.
Closes PR port-atari/41002 from David Ross.

While here, make options ST_POOL_SIZE defparam'ed to make sure to
reflect config(5) changes on each build.

Specify -fno-unwind-tables to shrink binaries.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.120.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

branches: 1.118.4;
Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.115.2; 1.115.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.112.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.109.2; 1.109.4;
Shrink GENERIC and enable options MODULAR instead, as other poor m68k ports.

This allows all (at least ATARITT and FALCON, which have certain users)
gzipped kernel binaries put into 1440KB 2HD floppy so that users can
load these kernels on the native TOS using LOADBSD.TTP utility for
installation. Note SMALL030 kernel doesn't include any Ethernet
configuration and requires CD-ROM or other removable disks.

Should be pulled up to netbsd-7.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.106.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except SMALL030_KERNEL.

Also remove COPTS="-Os" from std.* files and specify it in
GENERIC.in template for SMALL030_KERNEL.

branches: 1.105.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.104.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.98.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Drop makeoptions COPTS=-Os for the SMALL030 kernel now that std.atari
contains it.

branches: 1.95.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.94.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.92.2; 1.92.4;
Rename device name of Crazy Dots II ET4000 video from et(4) to et4k(4)
to deliver the name to recently committed newer and more common MI device,
et(4) at PCIe (Agere ET1310/ET1301 network driver) in PR kern/39094.
http://mail-index.NetBSD.org/source-changes/2010/11/13/msg014416.html

No particular reaction for a month on source-changes-d@,
no responsible person on atari port, and probably
no active user still using ET4000 on TT030 running NetBSD/atari.

Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

- don't enable TMPFS for SMALL030
- remove dup PTYFS

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

Disable options SERCONSOLE (force serial console if DCD is detected)
because now it's patchable by binpatch(8).

Enabling serial console by DCD signal could be problematic
on some earlier TT030 (with revision A board), and it's also
annoying for users who connect an active device on the serial port
as mentioned in PR port-atari/39849.

XXX: Eventually serial console should be enabled by MD bootloader flags,
XXX: but I have no idea how to build bootloader binaries for TOS.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

branches: 1.84.2;
Add support for the SMC Elite Ultra Ethernet with the SMC_TT VME-ISA bridge.

The SMC_TT is the user designed "handmade" VME-ISA bridge circuit
for 16 bit VME slot on TT030 and the SMC Elite Ultra ISA Ethernet card.
More information about SMC_TT can be found in the following archive:
ftp://ftp.funet.fi/pub/atari/net/smc_tt1.zip

Demonstrated on the NetBSD booth in Open Source Conference 2010 Kansai@Kobe.

Add pseudo-device ksyms. Noticed by David Ross on port-atari.

branches: 1.82.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Do not include FPU_EMULATE in ATARITT only config

Shuffle some things around and comment out some options to try to ensure
we can fit a gzipped SMALL030 on a 720K floppy and FALCON / ATARITT on
1.44MB ones

branches: 1.79.2;
add COMPAT_50 to all the configs with COMPAT_40.

- Merge ATARITT.in and FALCON.in into GENERIC.in so we can generate
a sane kernel config which defines both of them
- Cleanup all the #if defined(FOO) entries to be consistent and have
a matching /* FOO */ on the #endif line
- No change to generated ATARITT/FALCON/HADES/MILAN-ISAIDE/MILAN-PCIIDE
- Rename BOOT to SMALL030 and trim a little more to save space.
- Drop BOOTX

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Increase min ST_POOL_SIZE from 22 to 24 to avoid out of ST memory issues. Tested by Tuomo

Enable 68060 support in FALCON & BOOTX kernels for CT60/63 upgrades
Drop KERNFS from INSTALL kernels
Drop 68040 support from ATARITT kernels

Add a note that SERCONSOLE breaks on the Falcon, and remove from
FALCON config.

branches: 1.73.2; 1.73.4;
Move "options WAPBL" so that it also gets added to INSTALL kernels.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.71.6; 1.71.10; 1.71.12; 1.71.16;
Remove systrace. Ok core@.

branches: 1.70.2; 1.70.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.68.2; 1.68.6;
Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.67.2; 1.67.4; 1.67.8;
The COMPAT_AOUT_M68K option now requies COMPAT_40 after the changes
to mount(), so define COMPAT_40 too.

Add pseudo-device agr

branches: 1.65.2; 1.65.8; 1.65.10; 1.65.16; 1.65.18;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.64.2; 1.64.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.62.2;
Add CARP to further platforms

ok christos, julian coleman and matthew green

branches: 1.61.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.60.2; 1.60.4; 1.60.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.58.2;
Add uncommented file-system UDF for generated config GENERIC files.

branches: 1.57.2; 1.57.4;
merge ktrace-lwp.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.49.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.47.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.42.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.41.4;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.33.2;
add COMPAT_15/COMPAT_16

branches: 1.32.2;
Bye Bye UCONSOLE

Add support for wsdisplay and wskbd for HADES.
Add config option for et4000 with 2MB memory.

Since 1.6 we have 3 images (not 2!):
- 1Mb on HD floppy's
- 1.44Mb on HD floppy's
- 1.44Mb on a DD floppy

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added a commented out cgd(4).

add SYSTRACE here; pointed out by lukem

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF

Introduce NO_PHYS_NETWORK as a define in the FALCON kernel. This define is
used to turn off the vlan, bridge and pppoe pseudo devices and the NETATALK
protocol.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

Remove the 'ex at pci' driver. The ex driver does not work with the
3c900-COMBO card at the moment. Something is wrong with DMA.

branches: 1.19.2; 1.19.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Don't include pppoe in FALCON kernels, since they don't include any Ethernet
devices.

Move USERCONF to GENERIC.in and trim the phy-list.

Oops, remove some unintended changes.

Add some PCI ethernet/audio cards for the Hades and the Milan.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup whitespace

branches: 1.9.4;
Now the default ecexutable is ELF.
Add COMPAT_AOUT_M68K to GENERIC options.

branches: 1.8.2;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.6.2;
Remove Ident.

Add SysV Semaphore tunables.

Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

branches: 1.3.2;
Fix various misspellings of compatible/compatibility.

branches: 1.2.2;
The Hades also uses the TT030 like SCSI driver. Remove 'mouse' here...

Move GENERIC to GENERIC.in . This avoids confusion since GENERIC is not a
standalone config file anymore.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Allocalte enough reserved ST-RAM to make the old Xserver work by default.

Instead, check ST-RAM size and TT-RAM size on startup and restrict
size of reserved ST memory on lower RAM machines.
Closes PR port-atari/41002 from David Ross.

While here, make options ST_POOL_SIZE defparam'ed to make sure to
reflect config(5) changes on each build.

Specify -fno-unwind-tables to shrink binaries.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.120.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.115.2; 1.115.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.112.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.109.2; 1.109.4;
Shrink GENERIC and enable options MODULAR instead, as other poor m68k ports.

This allows all (at least ATARITT and FALCON, which have certain users)
gzipped kernel binaries put into 1440KB 2HD floppy so that users can
load these kernels on the native TOS using LOADBSD.TTP utility for
installation. Note SMALL030 kernel doesn't include any Ethernet
configuration and requires CD-ROM or other removable disks.

Should be pulled up to netbsd-7.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.106.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except SMALL030_KERNEL.

Also remove COPTS="-Os" from std.* files and specify it in
GENERIC.in template for SMALL030_KERNEL.

branches: 1.105.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.104.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.98.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Drop makeoptions COPTS=-Os for the SMALL030 kernel now that std.atari
contains it.

branches: 1.95.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.94.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.92.2; 1.92.4;
Rename device name of Crazy Dots II ET4000 video from et(4) to et4k(4)
to deliver the name to recently committed newer and more common MI device,
et(4) at PCIe (Agere ET1310/ET1301 network driver) in PR kern/39094.
http://mail-index.NetBSD.org/source-changes/2010/11/13/msg014416.html

No particular reaction for a month on source-changes-d@,
no responsible person on atari port, and probably
no active user still using ET4000 on TT030 running NetBSD/atari.

Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

- don't enable TMPFS for SMALL030
- remove dup PTYFS

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

Disable options SERCONSOLE (force serial console if DCD is detected)
because now it's patchable by binpatch(8).

Enabling serial console by DCD signal could be problematic
on some earlier TT030 (with revision A board), and it's also
annoying for users who connect an active device on the serial port
as mentioned in PR port-atari/39849.

XXX: Eventually serial console should be enabled by MD bootloader flags,
XXX: but I have no idea how to build bootloader binaries for TOS.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

branches: 1.84.2;
Add support for the SMC Elite Ultra Ethernet with the SMC_TT VME-ISA bridge.

The SMC_TT is the user designed "handmade" VME-ISA bridge circuit
for 16 bit VME slot on TT030 and the SMC Elite Ultra ISA Ethernet card.
More information about SMC_TT can be found in the following archive:
ftp://ftp.funet.fi/pub/atari/net/smc_tt1.zip

Demonstrated on the NetBSD booth in Open Source Conference 2010 Kansai@Kobe.

Add pseudo-device ksyms. Noticed by David Ross on port-atari.

branches: 1.82.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Do not include FPU_EMULATE in ATARITT only config

Shuffle some things around and comment out some options to try to ensure
we can fit a gzipped SMALL030 on a 720K floppy and FALCON / ATARITT on
1.44MB ones

branches: 1.79.2;
add COMPAT_50 to all the configs with COMPAT_40.

- Merge ATARITT.in and FALCON.in into GENERIC.in so we can generate
a sane kernel config which defines both of them
- Cleanup all the #if defined(FOO) entries to be consistent and have
a matching /* FOO */ on the #endif line
- No change to generated ATARITT/FALCON/HADES/MILAN-ISAIDE/MILAN-PCIIDE
- Rename BOOT to SMALL030 and trim a little more to save space.
- Drop BOOTX

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Increase min ST_POOL_SIZE from 22 to 24 to avoid out of ST memory issues. Tested by Tuomo

Enable 68060 support in FALCON & BOOTX kernels for CT60/63 upgrades
Drop KERNFS from INSTALL kernels
Drop 68040 support from ATARITT kernels

Add a note that SERCONSOLE breaks on the Falcon, and remove from
FALCON config.

branches: 1.73.2; 1.73.4;
Move "options WAPBL" so that it also gets added to INSTALL kernels.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.71.6; 1.71.10; 1.71.12; 1.71.16;
Remove systrace. Ok core@.

branches: 1.70.2; 1.70.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.68.2; 1.68.6;
Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.67.2; 1.67.4; 1.67.8;
The COMPAT_AOUT_M68K option now requies COMPAT_40 after the changes
to mount(), so define COMPAT_40 too.

Add pseudo-device agr

branches: 1.65.2; 1.65.8; 1.65.10; 1.65.16; 1.65.18;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.64.2; 1.64.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.62.2;
Add CARP to further platforms

ok christos, julian coleman and matthew green

branches: 1.61.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.60.2; 1.60.4; 1.60.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.58.2;
Add uncommented file-system UDF for generated config GENERIC files.

branches: 1.57.2; 1.57.4;
merge ktrace-lwp.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.49.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.47.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.42.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.41.4;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.33.2;
add COMPAT_15/COMPAT_16

branches: 1.32.2;
Bye Bye UCONSOLE

Add support for wsdisplay and wskbd for HADES.
Add config option for et4000 with 2MB memory.

Since 1.6 we have 3 images (not 2!):
- 1Mb on HD floppy's
- 1.44Mb on HD floppy's
- 1.44Mb on a DD floppy

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added a commented out cgd(4).

add SYSTRACE here; pointed out by lukem

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF

Introduce NO_PHYS_NETWORK as a define in the FALCON kernel. This define is
used to turn off the vlan, bridge and pppoe pseudo devices and the NETATALK
protocol.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

Remove the 'ex at pci' driver. The ex driver does not work with the
3c900-COMBO card at the moment. Something is wrong with DMA.

branches: 1.19.2; 1.19.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Don't include pppoe in FALCON kernels, since they don't include any Ethernet
devices.

Move USERCONF to GENERIC.in and trim the phy-list.

Oops, remove some unintended changes.

Add some PCI ethernet/audio cards for the Hades and the Milan.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup whitespace

branches: 1.9.4;
Now the default ecexutable is ELF.
Add COMPAT_AOUT_M68K to GENERIC options.

branches: 1.8.2;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.6.2;
Remove Ident.

Add SysV Semaphore tunables.

Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

branches: 1.3.2;
Fix various misspellings of compatible/compatibility.

branches: 1.2.2;
The Hades also uses the TT030 like SCSI driver. Remove 'mouse' here...

Move GENERIC to GENERIC.in . This avoids confusion since GENERIC is not a
standalone config file anymore.

Allocalte enough reserved ST-RAM to make the old Xserver work by default.

Instead, check ST-RAM size and TT-RAM size on startup and restrict
size of reserved ST memory on lower RAM machines.
Closes PR port-atari/41002 from David Ross.

While here, make options ST_POOL_SIZE defparam'ed to make sure to
reflect config(5) changes on each build.

Specify -fno-unwind-tables to shrink binaries.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.120.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.115.2; 1.115.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.112.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.109.2; 1.109.4;
Shrink GENERIC and enable options MODULAR instead, as other poor m68k ports.

This allows all (at least ATARITT and FALCON, which have certain users)
gzipped kernel binaries put into 1440KB 2HD floppy so that users can
load these kernels on the native TOS using LOADBSD.TTP utility for
installation. Note SMALL030 kernel doesn't include any Ethernet
configuration and requires CD-ROM or other removable disks.

Should be pulled up to netbsd-7.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.106.2;
Use COPTS="-O2 -fno-reorder-blocks" for kernels except SMALL030_KERNEL.

Also remove COPTS="-Os" from std.* files and specify it in
GENERIC.in template for SMALL030_KERNEL.

branches: 1.105.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.104.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.98.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

Drop makeoptions COPTS=-Os for the SMALL030 kernel now that std.atari
contains it.

branches: 1.95.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.94.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.92.2; 1.92.4;
Rename device name of Crazy Dots II ET4000 video from et(4) to et4k(4)
to deliver the name to recently committed newer and more common MI device,
et(4) at PCIe (Agere ET1310/ET1301 network driver) in PR kern/39094.
http://mail-index.NetBSD.org/source-changes/2010/11/13/msg014416.html

No particular reaction for a month on source-changes-d@,
no responsible person on atari port, and probably
no active user still using ET4000 on TT030 running NetBSD/atari.

Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

- don't enable TMPFS for SMALL030
- remove dup PTYFS

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

Disable options SERCONSOLE (force serial console if DCD is detected)
because now it's patchable by binpatch(8).

Enabling serial console by DCD signal could be problematic
on some earlier TT030 (with revision A board), and it's also
annoying for users who connect an active device on the serial port
as mentioned in PR port-atari/39849.

XXX: Eventually serial console should be enabled by MD bootloader flags,
XXX: but I have no idea how to build bootloader binaries for TOS.

Add support for the EtherNEC.

The EtherNEC is yet another user designed device for Atari machines,
an NE2000 based ISA board connected to Atari's ROM cartridge slot with
simple but ingenious interface and cartridge port adapter, and
it's the most available network solution for the old Atari machines.

See following pages for more details about EtherNEC:
http://hardware.atari.org/ether/
http://home.arcor.de/thomas.redelberger/prj/atari/etherne/
http://www.freemint.org/ethernec/ethernec.html

branches: 1.84.2;
Add support for the SMC Elite Ultra Ethernet with the SMC_TT VME-ISA bridge.

The SMC_TT is the user designed "handmade" VME-ISA bridge circuit
for 16 bit VME slot on TT030 and the SMC Elite Ultra ISA Ethernet card.
More information about SMC_TT can be found in the following archive:
ftp://ftp.funet.fi/pub/atari/net/smc_tt1.zip

Demonstrated on the NetBSD booth in Open Source Conference 2010 Kansai@Kobe.

Add pseudo-device ksyms. Noticed by David Ross on port-atari.

branches: 1.82.2;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Do not include FPU_EMULATE in ATARITT only config