Add ARMEB support to {evb,}arm/marvell.

Combined with upcoming commit to dev/marvell, all peripheral devices
seem to work just fine for KUROBOX_PRO in big-endian mode.

Initialise the windows and allow access to PCI Express port 1 first lane.

Allows xhci(4) to attach in the MV78230 based Lenovo ix4-300d

mvpex1 at mvsoc0 unit 4 offset 0x80000-0x81fff irq 62: Marvell PCI Express Interface
pci1 at mvpex1
xhci0 at pci1 dev 1 function 0: vendor 1033 product 0194 (rev. 0x04)
xhci0: interrupting at interrupt pin INTA#
usb3 at xhci0: USB revision 3.0
usb4 at xhci0: USB revision 2.0

branches: 1.11.2;
Add support Marvell Dove.
Also <SoC>_intr_bootstrap() rename to <SoC>_bootstrap(). And SoC init func, getclk into that.

branches: 1.10.2;
add new cryptographic accelerator driver 'mvxpsec.'

this driver controls CESA unit as same as mvcesa, but uses DMA engines and
does CBC operations, HMAC operations by hardware. about 2 kbytes of data
are processed at one. supported algorithms are:

- DES-CBC, 3DES-CBC, AES-CBC
- HMAC-SHA1, HMAC-MD5

non-CBC algorithm such as AES-GCM is not supported by CESA's acceleration
engine. mvcesa is still useful to implement such algorithms as combination of
accelerated block cipher and software chaining.

dump Mbus settins on boot if AV_VERBOSE or AV_DEBUG is enabled.

branches: 1.8.6;
Add armada370_getclks().
Remove some white spaces.

Support to check the clock gating for Armada XP in armadaxp.c.
Also move the checking for clock gate of Kirkwood into kirkwood.c.

Move Misc Registers from mvsocreg.h to armadaxpreg.h. These registers only
Armada XP. The misc_base initializes in initarm() instead of mvsoc_bootstrap().

Remove #ifdef ARMADAXP. It is OK !ARMADAXP.
Change argument for armadaxp functions.
Add some MV78xx0 definitions.
Add mv78xx0 functions.

branches: 1.4.2;
Add support for mvsoc-based Armada XP peripherals.

Obtained from Marvell, Semihalf.

branches: 1.3.2;
Add tags for PEX1 of Kirkwood.
Remove unneccesary white-space.
Reorder function prototypes.

branches: 1.2.2;
#include <sys/bus.h> instead of <machine/bus.h>.

branches: 1.1.2; 1.1.4; 1.1.10;
Add support Marvell Sheeva Core and SoC. (Orion/Kirkwood)
Discovery Innovation not yet.

Initialise the windows and allow access to PCI Express port 1 first lane.

Allows xhci(4) to attach in the MV78230 based Lenovo ix4-300d

mvpex1 at mvsoc0 unit 4 offset 0x80000-0x81fff irq 62: Marvell PCI Express Interface
pci1 at mvpex1
xhci0 at pci1 dev 1 function 0: vendor 1033 product 0194 (rev. 0x04)
xhci0: interrupting at interrupt pin INTA#
usb3 at xhci0: USB revision 3.0
usb4 at xhci0: USB revision 2.0

Add support Marvell Dove.
Also <SoC>_intr_bootstrap() rename to <SoC>_bootstrap(). And SoC init func, getclk into that.

add new cryptographic accelerator driver 'mvxpsec.'

this driver controls CESA unit as same as mvcesa, but uses DMA engines and
does CBC operations, HMAC operations by hardware. about 2 kbytes of data
are processed at one. supported algorithms are:

- DES-CBC, 3DES-CBC, AES-CBC
- HMAC-SHA1, HMAC-MD5

non-CBC algorithm such as AES-GCM is not supported by CESA's acceleration
engine. mvcesa is still useful to implement such algorithms as combination of
accelerated block cipher and software chaining.

dump Mbus settins on boot if AV_VERBOSE or AV_DEBUG is enabled.

branches: 1.8.6;
Add armada370_getclks().
Remove some white spaces.

Support to check the clock gating for Armada XP in armadaxp.c.
Also move the checking for clock gate of Kirkwood into kirkwood.c.

Move Misc Registers from mvsocreg.h to armadaxpreg.h. These registers only
Armada XP. The misc_base initializes in initarm() instead of mvsoc_bootstrap().

Remove #ifdef ARMADAXP. It is OK !ARMADAXP.
Change argument for armadaxp functions.
Add some MV78xx0 definitions.
Add mv78xx0 functions.

branches: 1.4.2;
Add support for mvsoc-based Armada XP peripherals.

Obtained from Marvell, Semihalf.

branches: 1.3.2;
Add tags for PEX1 of Kirkwood.
Remove unneccesary white-space.
Reorder function prototypes.

branches: 1.2.2;
#include <sys/bus.h> instead of <machine/bus.h>.

branches: 1.1.2; 1.1.4; 1.1.10;
Add support Marvell Sheeva Core and SoC. (Orion/Kirkwood)
Discovery Innovation not yet.

Add support Marvell Dove.
Also <SoC>_intr_bootstrap() rename to <SoC>_bootstrap(). And SoC init func, getclk into that.

add new cryptographic accelerator driver 'mvxpsec.'

this driver controls CESA unit as same as mvcesa, but uses DMA engines and
does CBC operations, HMAC operations by hardware. about 2 kbytes of data
are processed at one. supported algorithms are:

- DES-CBC, 3DES-CBC, AES-CBC
- HMAC-SHA1, HMAC-MD5

non-CBC algorithm such as AES-GCM is not supported by CESA's acceleration
engine. mvcesa is still useful to implement such algorithms as combination of
accelerated block cipher and software chaining.

dump Mbus settins on boot if AV_VERBOSE or AV_DEBUG is enabled.

branches: 1.8.6;
Add armada370_getclks().
Remove some white spaces.

Support to check the clock gating for Armada XP in armadaxp.c.
Also move the checking for clock gate of Kirkwood into kirkwood.c.

Move Misc Registers from mvsocreg.h to armadaxpreg.h. These registers only
Armada XP. The misc_base initializes in initarm() instead of mvsoc_bootstrap().

Remove #ifdef ARMADAXP. It is OK !ARMADAXP.
Change argument for armadaxp functions.
Add some MV78xx0 definitions.
Add mv78xx0 functions.

branches: 1.4.2;
Add support for mvsoc-based Armada XP peripherals.

Obtained from Marvell, Semihalf.

branches: 1.3.2;
Add tags for PEX1 of Kirkwood.
Remove unneccesary white-space.
Reorder function prototypes.

branches: 1.2.2;
#include <sys/bus.h> instead of <machine/bus.h>.

branches: 1.1.2; 1.1.4; 1.1.10;
Add support Marvell Sheeva Core and SoC. (Orion/Kirkwood)
Discovery Innovation not yet.