x86: Disable new DRM_LEGACY option in INSTALL kernel.

The INSTALL kernel appears to be intended to have no drm in it at
all, but DRM_LEGACY brings it in just for modules.

Follow arm64 and provide two sizes of fonts, so a larger one is chosen
for larger displays.

revert previous, nouveau apparently works for some people.

comment out nouveau related lines in INSTALL kernels too

branches: 1.92.4;
Disable nouveau for INSTALL as in a similar manner to other DRMKMS drivers.
XXX pullup to netbsd-8

branches: 1.91.8;
Whitespace.

branches: 1.90.2; 1.90.4;
propagate drm changes

branches: 1.89.8;
Fix compile error. PR#38480 was correctly fixed in 2009, it's ok to remove
"no options MTRR"

branches: 1.88.8;
First step of random number subsystem rework described in
<20111022023242.BA26F14A158@mail.netbsd.org>. This change includes
the following:

An initial cleanup and minor reorganization of the entropy pool
code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are
fixed. Some effort is made to accumulate entropy more quickly at
boot time.

A generic interface, "rndsink", is added, for stream generators to
request that they be re-keyed with good quality entropy from the pool
as soon as it is available.

The arc4random()/arc4randbytes() implementation in libkern is
adjusted to use the rndsink interface for rekeying, which helps
address the problem of low-quality keys at boot time.

An implementation of the FIPS 140-2 statistical tests for random
number generator quality is provided (libkern/rngtest.c). This
is based on Greg Rose's implementation from Qualcomm.

A new random stream generator, nist_ctr_drbg, is provided. It is
based on an implementation of the NIST SP800-90 CTR_DRBG by
Henric Jungheim. This generator users AES in a modified counter
mode to generate a backtracking-resistant random stream.

An abstraction layer, "cprng", is provided for in-kernel consumers
of randomness. The arc4random/arc4randbytes API is deprecated for
in-kernel use. It is replaced by "cprng_strong". The current
cprng_fast implementation wraps the existing arc4random
implementation. The current cprng_strong implementation wraps the
new CTR_DRBG implementation. Both interfaces are rekeyed from
the entropy pool automatically at intervals justifiable from best
current cryptographic practice.

In some quick tests, cprng_fast() is about the same speed as
the old arc4randbytes(), and cprng_strong() is about 20% faster
than rnd_extract_data(). Performance is expected to improve.

The AES code in src/crypto/rijndael is no longer an optional
kernel component, as it is required by cprng_strong, which is
not an optional kernel component.

The entropy pool output is subjected to the rngtest tests at
startup time; if it fails, the system will reboot. There is
approximately a 3/10000 chance of a false positive from these
tests. Entropy pool _input_ from hardware random numbers is
subjected to the rngtest tests at attach time, as well as the
FIPS continuous-output test, to detect bad or stuck hardware
RNGs; if any are detected, they are detached, but the system
continues to run.

A problem with rndctl(8) is fixed -- datastructures with
pointers in arrays are no longer passed to userspace (this
was not a security problem, but rather a major issue for
compat32). A new kernel will require a new rndctl.

The sysctl kern.arandom() and kern.urandom() nodes are hooked
up to the new generators, but the /dev/*random pseudodevices
are not, yet.

Manual pages for the new kernel interfaces are forthcoming.

branches: 1.87.2;
Finish reverting premature modularization of amd64 kernels.

many whitespace cleanup.

Per mrg@ request, add MFS as default builtin, for things like init(8).

XXX should be replaced by TMPFS eventually.

Build certain file-systems and options(7) as module(7). 32 and 64 bits
support are still builtin, as well as FFS, NFS, TMPFS, and most COMPAT
code. Saves approx. 750kiB.

Reflect this in INSTALL kernel, where we have to support more file systems
statically.

See http://mail-index.netbsd.org/port-amd64/2011/02/13/msg001318.html

attach drm hw drivers to 'drm' not 'vga'

branches: 1.82.4; 1.82.6; 1.82.8;
put back drm.

branches: 1.81.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.80.8;
- Give x86 BIOS boot the ability to load new style modules and pass them
into the kernel. Based on a patch by jmcneill@, with many fixes and
improvements by me.

- Put MEMORY_DISK_DYNAMIC and MODULAR into the GENERIC kernels, so that
you can load miniroot.kmod from the boot blocks and boot into the
installer!

branches: 1.79.2;
Work around PR38480 by making it possible to omit options MTRR from
amd64 INSTALL kernels -- and doing so. At least you can now get an
INSTALL kernel onto a box with this odd MTRR configuration to debug it.

branches: 1.78.6; 1.78.8;
Better description, this is not GENERIC after all.

Use GENERIC for installation as well, just add the ramdisk hooks.

branches: 1.76.4;
arc(4) -> arcmsr(4)

Enable arc(4).

branches: 1.74.2;
PR/37404 - Rui-Xiang Guo -- sync phy list with GENERIC

branches: 1.73.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.72.4;
Fixed indentation (it should be <keyword><space><tab><name><tab><comment>).

branches: 1.71.4; 1.71.8; 1.71.10;
-options I2OVERBOSE.

Enable aac(4) and ld at aac.

add jmide(4), a driver for the JMicron Technology JMB36x PCIe to SATA II/PATA
controllers. These controllers can be found on add-on PCIe cards, or
on some motherboards to provide the PATA connectivity (e.g. some intel
ICH8-based motherboards).

Thanks to JMicron Technology for providing me documentation and
different sample boards for this work.

PR/36234 - Joerg Niendorf -- xi -> xirc

branches: 1.67.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.66.2; 1.66.4;
For the benefit of modern hardware, enable ACPI by default in INSTALL and
GENERIC kernels. If ACPI is an issue on your hardware, 'boot -c' and
'disable acpi' should be a workaround. ACPI-enabled kernels works fine
on pre-acpi hardware.
for amd64:
- add ACPI to INSTALL and GENERIC, remove the *_ACPI config files.
- get rid of the bootfloppy-big.fs boot image, and got to a 3-floppy boot
image
for i386:
- introduce INSTALL_LARGE which has ACPI and some devices with big firmware
- move some devices from INSTALL to INSTALL_LARGE
- Boot floppies still use INSTALL, and bootfloppy-big.fs is still there
(for thoses who want to build el-torito floppy emulation boot CD) and use
INSTALL.
For both, drop the 'iso-image' code in etc/ to make the iso bootable, we'll
use something else to build bootable CDs.

branches: 1.65.2;
Disable wsmouse(4) and all the related low-level drivers The installer
ramdisk doesn't support using the mouse anyway.

Idea provided by Blair Sadewitz in private e-mail.

Uncomment pseudo-device raid and options RAID_AUTOCONFIG, to match
i386's INSTALL. Suggested by Florence HENRY on port-amd64@

Disable ppp(4) because pppd(8) isn't on the installation image anyway.

Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.

Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.

branches: 1.60.2;
Add ahcisata(4), a driver for AHCI 1.0 and 1.1 controllers. Tested on the sata
ports of a Intel 63xxESB chipset. Does not support NCQ yet.

Add support for the Intel 80003 Gigabit Ethernet controller (found e.g. in
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs

Sync IDE/SATA drivers with i386/GENERIC. Fixes PR port-amd64/34829.

Add iteide(4) driver to GENERIC and INSTALL kernels; PR# 33426.

branches: 1.56.2;
Add msk and mskc.

branches: 1.55.2;
s/adpater/adapter/

Prompted by PR/34195

branches: 1.54.2;
Add twa(4) and ld at twa

Add entries for svwsata(4) to amd64 GENERIC and INSTALL kernels,
to support SATA ports on Serverworks HT-1000 (aka bcm5785) chips.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

Remove the getwschar and putwschar accessops from wsdisplay drivers as
requested by uwe@. These were wrong because they were receiving an
emulcookie yet they were accessops (thus having to receive an accesscookie).
Instead, just handle the WSDISPLAYIO_{GET,PUT}WSCHAR ioctls from the
driver's ioctl accessop.

As this reduces the amount of code needed to handle these operations to
two small functions in each driver, remove the WSDISPLAY_CHARFUNCS kernel
option.

Reviewed by, at least, uwe@ and macallan@. No objections in tech-kern@.

Added ciss(4). Tested by Joseph Dacuma on HP DL-380 G3 with Smart Array 5i.

Enable rgephy(4), closes PR port-amd64/33117.

branches: 1.48.2;
add nfe.

branches: 1.47.2; 1.47.4;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.45.2; 1.45.4;
Enable rlphy(4).

branches: 1.44.2;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Compile with -fno-asynchronous-unwind-tables so that gcc doesn't generate
the .eh_frame data area that can be used to aid thr generation of stack
traceback - at a cost of a load of bloat!
Reinstate the isp driver.
Remove the unlikely-to-be-needed esh, lmc and ntwoc.

We don't need 'le' here, I'm not sure amd64 GENERIC deserves it either.

branches: 1.40.6;
Add sk ethernet as found on ASUS A8V.
Increase ramdisk to 5MB, costs virtually nothing.

remove "dev" locators from cardbus device definitions, it doesn't
make sense technically and might be removed

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

Add (commented out) ucycom to various kernel configs.

Add config goo for ath. Tested with a PCI card, detected as:

ath0 at pci0 dev 10 function 0
ath0: interrupting at ioapic0 pin 17 (irq 5)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M bps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 3.6

Cardbus untested, so it is commented out.

Add (commented out) IPSEC_NAT_T option.

branches: 1.34.2;
Added support for amr. Tested by Joseph A. Dacuma with Dell PowerEdge 2800.

Remove 'isp' driver (support for Qlogic ISP [12]0x0 SCSI/FibreChannel).
Compensates for the recent bloat of the ath driver and 802.11 support.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add ukyopon(4).

Comment out options for PPP compression and active filtering. They are not
necessary in an installation kernel but increase the size considerably.
This fixes PR port-amd64/29928.

Comment out some wscons(4) options which are only required to run a
X11 server.

Add attimer(4) configurations everywhere pcppi(4) exists, with the
following rule:
If a pcppi device is enabled for an attachment, enable an attimer for the
same attachement, otherwise comment it.

branches: 1.27.2;
Enable FFS_NO_SNAPSHOT in the INSTALL kernel so that it fits into 2 floppies

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.23.2;
Add "options PMS_SYNAPTICS_TOUCHPAD", commented out by default.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.21.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

Remove some devices (sync with i386).

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add re; Realtek GbE.

Don't need cz or cy devices in INSTALL kernel, and they put space
pressure on install media.

branches: 1.14.2;
Comment out some SYSV* and *VERBOSE options to shrink these down so
they fit in the current boot floppies.

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Trim ramdisk and remove some unneeded options.

Add igphy.

Add ahd, bce, ataraid

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add new per-chip pciide drivers.

Add atabus.

Use MPBIOS_SCANPCI by default.

Remove a lot of stuff, making it closer to the i386 INSTALL.

branches: 1.3.2;
Decrease the ramdisk size a bit to allow for more options to be added
to the kernel, and still have it fit in 2.88M.

Enable ioapics.

Rename the x86_64 port to amd64, as this is the actual name used for
the processor family now. x86_64 is kept as the MACHINE_ARCH value,
since it's already widely used (by e.g. the toolchain, etc), and
by other operating systems.

Follow arm64 and provide two sizes of fonts, so a larger one is chosen
for larger displays.

revert previous, nouveau apparently works for some people.

comment out nouveau related lines in INSTALL kernels too

Disable nouveau for INSTALL as in a similar manner to other DRMKMS drivers.
XXX pullup to netbsd-8

branches: 1.91.8;
Whitespace.

branches: 1.90.2; 1.90.4;
propagate drm changes

branches: 1.89.8;
Fix compile error. PR#38480 was correctly fixed in 2009, it's ok to remove
"no options MTRR"

branches: 1.88.8;
First step of random number subsystem rework described in
<20111022023242.BA26F14A158@mail.netbsd.org>. This change includes
the following:

An initial cleanup and minor reorganization of the entropy pool
code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are
fixed. Some effort is made to accumulate entropy more quickly at
boot time.

A generic interface, "rndsink", is added, for stream generators to
request that they be re-keyed with good quality entropy from the pool
as soon as it is available.

The arc4random()/arc4randbytes() implementation in libkern is
adjusted to use the rndsink interface for rekeying, which helps
address the problem of low-quality keys at boot time.

An implementation of the FIPS 140-2 statistical tests for random
number generator quality is provided (libkern/rngtest.c). This
is based on Greg Rose's implementation from Qualcomm.

A new random stream generator, nist_ctr_drbg, is provided. It is
based on an implementation of the NIST SP800-90 CTR_DRBG by
Henric Jungheim. This generator users AES in a modified counter
mode to generate a backtracking-resistant random stream.

An abstraction layer, "cprng", is provided for in-kernel consumers
of randomness. The arc4random/arc4randbytes API is deprecated for
in-kernel use. It is replaced by "cprng_strong". The current
cprng_fast implementation wraps the existing arc4random
implementation. The current cprng_strong implementation wraps the
new CTR_DRBG implementation. Both interfaces are rekeyed from
the entropy pool automatically at intervals justifiable from best
current cryptographic practice.

In some quick tests, cprng_fast() is about the same speed as
the old arc4randbytes(), and cprng_strong() is about 20% faster
than rnd_extract_data(). Performance is expected to improve.

The AES code in src/crypto/rijndael is no longer an optional
kernel component, as it is required by cprng_strong, which is
not an optional kernel component.

The entropy pool output is subjected to the rngtest tests at
startup time; if it fails, the system will reboot. There is
approximately a 3/10000 chance of a false positive from these
tests. Entropy pool _input_ from hardware random numbers is
subjected to the rngtest tests at attach time, as well as the
FIPS continuous-output test, to detect bad or stuck hardware
RNGs; if any are detected, they are detached, but the system
continues to run.

A problem with rndctl(8) is fixed -- datastructures with
pointers in arrays are no longer passed to userspace (this
was not a security problem, but rather a major issue for
compat32). A new kernel will require a new rndctl.

The sysctl kern.arandom() and kern.urandom() nodes are hooked
up to the new generators, but the /dev/*random pseudodevices
are not, yet.

Manual pages for the new kernel interfaces are forthcoming.

branches: 1.87.2;
Finish reverting premature modularization of amd64 kernels.

many whitespace cleanup.

Per mrg@ request, add MFS as default builtin, for things like init(8).

XXX should be replaced by TMPFS eventually.

Build certain file-systems and options(7) as module(7). 32 and 64 bits
support are still builtin, as well as FFS, NFS, TMPFS, and most COMPAT
code. Saves approx. 750kiB.

Reflect this in INSTALL kernel, where we have to support more file systems
statically.

See http://mail-index.netbsd.org/port-amd64/2011/02/13/msg001318.html

attach drm hw drivers to 'drm' not 'vga'

branches: 1.82.4; 1.82.6; 1.82.8;
put back drm.

branches: 1.81.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.80.8;
- Give x86 BIOS boot the ability to load new style modules and pass them
into the kernel. Based on a patch by jmcneill@, with many fixes and
improvements by me.

- Put MEMORY_DISK_DYNAMIC and MODULAR into the GENERIC kernels, so that
you can load miniroot.kmod from the boot blocks and boot into the
installer!

branches: 1.79.2;
Work around PR38480 by making it possible to omit options MTRR from
amd64 INSTALL kernels -- and doing so. At least you can now get an
INSTALL kernel onto a box with this odd MTRR configuration to debug it.

branches: 1.78.6; 1.78.8;
Better description, this is not GENERIC after all.

Use GENERIC for installation as well, just add the ramdisk hooks.

branches: 1.76.4;
arc(4) -> arcmsr(4)

Enable arc(4).

branches: 1.74.2;
PR/37404 - Rui-Xiang Guo -- sync phy list with GENERIC

branches: 1.73.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.72.4;
Fixed indentation (it should be <keyword><space><tab><name><tab><comment>).

branches: 1.71.4; 1.71.8; 1.71.10;
-options I2OVERBOSE.

Enable aac(4) and ld at aac.

add jmide(4), a driver for the JMicron Technology JMB36x PCIe to SATA II/PATA
controllers. These controllers can be found on add-on PCIe cards, or
on some motherboards to provide the PATA connectivity (e.g. some intel
ICH8-based motherboards).

Thanks to JMicron Technology for providing me documentation and
different sample boards for this work.

PR/36234 - Joerg Niendorf -- xi -> xirc

branches: 1.67.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.66.2; 1.66.4;
For the benefit of modern hardware, enable ACPI by default in INSTALL and
GENERIC kernels. If ACPI is an issue on your hardware, 'boot -c' and
'disable acpi' should be a workaround. ACPI-enabled kernels works fine
on pre-acpi hardware.
for amd64:
- add ACPI to INSTALL and GENERIC, remove the *_ACPI config files.
- get rid of the bootfloppy-big.fs boot image, and got to a 3-floppy boot
image
for i386:
- introduce INSTALL_LARGE which has ACPI and some devices with big firmware
- move some devices from INSTALL to INSTALL_LARGE
- Boot floppies still use INSTALL, and bootfloppy-big.fs is still there
(for thoses who want to build el-torito floppy emulation boot CD) and use
INSTALL.
For both, drop the 'iso-image' code in etc/ to make the iso bootable, we'll
use something else to build bootable CDs.

branches: 1.65.2;
Disable wsmouse(4) and all the related low-level drivers The installer
ramdisk doesn't support using the mouse anyway.

Idea provided by Blair Sadewitz in private e-mail.

Uncomment pseudo-device raid and options RAID_AUTOCONFIG, to match
i386's INSTALL. Suggested by Florence HENRY on port-amd64@

Disable ppp(4) because pppd(8) isn't on the installation image anyway.

Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.

Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.

branches: 1.60.2;
Add ahcisata(4), a driver for AHCI 1.0 and 1.1 controllers. Tested on the sata
ports of a Intel 63xxESB chipset. Does not support NCQ yet.

Add support for the Intel 80003 Gigabit Ethernet controller (found e.g. in
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs

Sync IDE/SATA drivers with i386/GENERIC. Fixes PR port-amd64/34829.

Add iteide(4) driver to GENERIC and INSTALL kernels; PR# 33426.

branches: 1.56.2;
Add msk and mskc.

branches: 1.55.2;
s/adpater/adapter/

Prompted by PR/34195

branches: 1.54.2;
Add twa(4) and ld at twa

Add entries for svwsata(4) to amd64 GENERIC and INSTALL kernels,
to support SATA ports on Serverworks HT-1000 (aka bcm5785) chips.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

Remove the getwschar and putwschar accessops from wsdisplay drivers as
requested by uwe@. These were wrong because they were receiving an
emulcookie yet they were accessops (thus having to receive an accesscookie).
Instead, just handle the WSDISPLAYIO_{GET,PUT}WSCHAR ioctls from the
driver's ioctl accessop.

As this reduces the amount of code needed to handle these operations to
two small functions in each driver, remove the WSDISPLAY_CHARFUNCS kernel
option.

Reviewed by, at least, uwe@ and macallan@. No objections in tech-kern@.

Added ciss(4). Tested by Joseph Dacuma on HP DL-380 G3 with Smart Array 5i.

Enable rgephy(4), closes PR port-amd64/33117.

branches: 1.48.2;
add nfe.

branches: 1.47.2; 1.47.4;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.45.2; 1.45.4;
Enable rlphy(4).

branches: 1.44.2;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Compile with -fno-asynchronous-unwind-tables so that gcc doesn't generate
the .eh_frame data area that can be used to aid thr generation of stack
traceback - at a cost of a load of bloat!
Reinstate the isp driver.
Remove the unlikely-to-be-needed esh, lmc and ntwoc.

We don't need 'le' here, I'm not sure amd64 GENERIC deserves it either.

branches: 1.40.6;
Add sk ethernet as found on ASUS A8V.
Increase ramdisk to 5MB, costs virtually nothing.

remove "dev" locators from cardbus device definitions, it doesn't
make sense technically and might be removed

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

Add (commented out) ucycom to various kernel configs.

Add config goo for ath. Tested with a PCI card, detected as:

ath0 at pci0 dev 10 function 0
ath0: interrupting at ioapic0 pin 17 (irq 5)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M bps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 3.6

Cardbus untested, so it is commented out.

Add (commented out) IPSEC_NAT_T option.

branches: 1.34.2;
Added support for amr. Tested by Joseph A. Dacuma with Dell PowerEdge 2800.

Remove 'isp' driver (support for Qlogic ISP [12]0x0 SCSI/FibreChannel).
Compensates for the recent bloat of the ath driver and 802.11 support.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add ukyopon(4).

Comment out options for PPP compression and active filtering. They are not
necessary in an installation kernel but increase the size considerably.
This fixes PR port-amd64/29928.

Comment out some wscons(4) options which are only required to run a
X11 server.

Add attimer(4) configurations everywhere pcppi(4) exists, with the
following rule:
If a pcppi device is enabled for an attachment, enable an attimer for the
same attachement, otherwise comment it.

branches: 1.27.2;
Enable FFS_NO_SNAPSHOT in the INSTALL kernel so that it fits into 2 floppies

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.23.2;
Add "options PMS_SYNAPTICS_TOUCHPAD", commented out by default.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.21.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

Remove some devices (sync with i386).

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add re; Realtek GbE.

Don't need cz or cy devices in INSTALL kernel, and they put space
pressure on install media.

branches: 1.14.2;
Comment out some SYSV* and *VERBOSE options to shrink these down so
they fit in the current boot floppies.

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Trim ramdisk and remove some unneeded options.

Add igphy.

Add ahd, bce, ataraid

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add new per-chip pciide drivers.

Add atabus.

Use MPBIOS_SCANPCI by default.

Remove a lot of stuff, making it closer to the i386 INSTALL.

branches: 1.3.2;
Decrease the ramdisk size a bit to allow for more options to be added
to the kernel, and still have it fit in 2.88M.

Enable ioapics.

Rename the x86_64 port to amd64, as this is the actual name used for
the processor family now. x86_64 is kept as the MACHINE_ARCH value,
since it's already widely used (by e.g. the toolchain, etc), and
by other operating systems.

Disable nouveau for INSTALL as in a similar manner to other DRMKMS drivers.
XXX pullup to netbsd-8

branches: 1.91.8;
Whitespace.

branches: 1.90.2; 1.90.4;
propagate drm changes

branches: 1.89.8;
Fix compile error. PR#38480 was correctly fixed in 2009, it's ok to remove
"no options MTRR"

branches: 1.88.8;
First step of random number subsystem rework described in
<20111022023242.BA26F14A158@mail.netbsd.org>. This change includes
the following:

An initial cleanup and minor reorganization of the entropy pool
code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are
fixed. Some effort is made to accumulate entropy more quickly at
boot time.

A generic interface, "rndsink", is added, for stream generators to
request that they be re-keyed with good quality entropy from the pool
as soon as it is available.

The arc4random()/arc4randbytes() implementation in libkern is
adjusted to use the rndsink interface for rekeying, which helps
address the problem of low-quality keys at boot time.

An implementation of the FIPS 140-2 statistical tests for random
number generator quality is provided (libkern/rngtest.c). This
is based on Greg Rose's implementation from Qualcomm.

A new random stream generator, nist_ctr_drbg, is provided. It is
based on an implementation of the NIST SP800-90 CTR_DRBG by
Henric Jungheim. This generator users AES in a modified counter
mode to generate a backtracking-resistant random stream.

An abstraction layer, "cprng", is provided for in-kernel consumers
of randomness. The arc4random/arc4randbytes API is deprecated for
in-kernel use. It is replaced by "cprng_strong". The current
cprng_fast implementation wraps the existing arc4random
implementation. The current cprng_strong implementation wraps the
new CTR_DRBG implementation. Both interfaces are rekeyed from
the entropy pool automatically at intervals justifiable from best
current cryptographic practice.

In some quick tests, cprng_fast() is about the same speed as
the old arc4randbytes(), and cprng_strong() is about 20% faster
than rnd_extract_data(). Performance is expected to improve.

The AES code in src/crypto/rijndael is no longer an optional
kernel component, as it is required by cprng_strong, which is
not an optional kernel component.

The entropy pool output is subjected to the rngtest tests at
startup time; if it fails, the system will reboot. There is
approximately a 3/10000 chance of a false positive from these
tests. Entropy pool _input_ from hardware random numbers is
subjected to the rngtest tests at attach time, as well as the
FIPS continuous-output test, to detect bad or stuck hardware
RNGs; if any are detected, they are detached, but the system
continues to run.

A problem with rndctl(8) is fixed -- datastructures with
pointers in arrays are no longer passed to userspace (this
was not a security problem, but rather a major issue for
compat32). A new kernel will require a new rndctl.

The sysctl kern.arandom() and kern.urandom() nodes are hooked
up to the new generators, but the /dev/*random pseudodevices
are not, yet.

Manual pages for the new kernel interfaces are forthcoming.

branches: 1.87.2;
Finish reverting premature modularization of amd64 kernels.

many whitespace cleanup.

Per mrg@ request, add MFS as default builtin, for things like init(8).

XXX should be replaced by TMPFS eventually.

Build certain file-systems and options(7) as module(7). 32 and 64 bits
support are still builtin, as well as FFS, NFS, TMPFS, and most COMPAT
code. Saves approx. 750kiB.

Reflect this in INSTALL kernel, where we have to support more file systems
statically.

See http://mail-index.netbsd.org/port-amd64/2011/02/13/msg001318.html

attach drm hw drivers to 'drm' not 'vga'

branches: 1.82.4; 1.82.6; 1.82.8;
put back drm.

branches: 1.81.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.80.8;
- Give x86 BIOS boot the ability to load new style modules and pass them
into the kernel. Based on a patch by jmcneill@, with many fixes and
improvements by me.

- Put MEMORY_DISK_DYNAMIC and MODULAR into the GENERIC kernels, so that
you can load miniroot.kmod from the boot blocks and boot into the
installer!

branches: 1.79.2;
Work around PR38480 by making it possible to omit options MTRR from
amd64 INSTALL kernels -- and doing so. At least you can now get an
INSTALL kernel onto a box with this odd MTRR configuration to debug it.

branches: 1.78.6; 1.78.8;
Better description, this is not GENERIC after all.

Use GENERIC for installation as well, just add the ramdisk hooks.

branches: 1.76.4;
arc(4) -> arcmsr(4)

Enable arc(4).

branches: 1.74.2;
PR/37404 - Rui-Xiang Guo -- sync phy list with GENERIC

branches: 1.73.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.72.4;
Fixed indentation (it should be <keyword><space><tab><name><tab><comment>).

branches: 1.71.4; 1.71.8; 1.71.10;
-options I2OVERBOSE.

Enable aac(4) and ld at aac.

add jmide(4), a driver for the JMicron Technology JMB36x PCIe to SATA II/PATA
controllers. These controllers can be found on add-on PCIe cards, or
on some motherboards to provide the PATA connectivity (e.g. some intel
ICH8-based motherboards).

Thanks to JMicron Technology for providing me documentation and
different sample boards for this work.

PR/36234 - Joerg Niendorf -- xi -> xirc

branches: 1.67.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.66.2; 1.66.4;
For the benefit of modern hardware, enable ACPI by default in INSTALL and
GENERIC kernels. If ACPI is an issue on your hardware, 'boot -c' and
'disable acpi' should be a workaround. ACPI-enabled kernels works fine
on pre-acpi hardware.
for amd64:
- add ACPI to INSTALL and GENERIC, remove the *_ACPI config files.
- get rid of the bootfloppy-big.fs boot image, and got to a 3-floppy boot
image
for i386:
- introduce INSTALL_LARGE which has ACPI and some devices with big firmware
- move some devices from INSTALL to INSTALL_LARGE
- Boot floppies still use INSTALL, and bootfloppy-big.fs is still there
(for thoses who want to build el-torito floppy emulation boot CD) and use
INSTALL.
For both, drop the 'iso-image' code in etc/ to make the iso bootable, we'll
use something else to build bootable CDs.

branches: 1.65.2;
Disable wsmouse(4) and all the related low-level drivers The installer
ramdisk doesn't support using the mouse anyway.

Idea provided by Blair Sadewitz in private e-mail.

Uncomment pseudo-device raid and options RAID_AUTOCONFIG, to match
i386's INSTALL. Suggested by Florence HENRY on port-amd64@

Disable ppp(4) because pppd(8) isn't on the installation image anyway.

Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.

Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.

branches: 1.60.2;
Add ahcisata(4), a driver for AHCI 1.0 and 1.1 controllers. Tested on the sata
ports of a Intel 63xxESB chipset. Does not support NCQ yet.

Add support for the Intel 80003 Gigabit Ethernet controller (found e.g. in
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs

Sync IDE/SATA drivers with i386/GENERIC. Fixes PR port-amd64/34829.

Add iteide(4) driver to GENERIC and INSTALL kernels; PR# 33426.

branches: 1.56.2;
Add msk and mskc.

branches: 1.55.2;
s/adpater/adapter/

Prompted by PR/34195

branches: 1.54.2;
Add twa(4) and ld at twa

Add entries for svwsata(4) to amd64 GENERIC and INSTALL kernels,
to support SATA ports on Serverworks HT-1000 (aka bcm5785) chips.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

Remove the getwschar and putwschar accessops from wsdisplay drivers as
requested by uwe@. These were wrong because they were receiving an
emulcookie yet they were accessops (thus having to receive an accesscookie).
Instead, just handle the WSDISPLAYIO_{GET,PUT}WSCHAR ioctls from the
driver's ioctl accessop.

As this reduces the amount of code needed to handle these operations to
two small functions in each driver, remove the WSDISPLAY_CHARFUNCS kernel
option.

Reviewed by, at least, uwe@ and macallan@. No objections in tech-kern@.

Added ciss(4). Tested by Joseph Dacuma on HP DL-380 G3 with Smart Array 5i.

Enable rgephy(4), closes PR port-amd64/33117.

branches: 1.48.2;
add nfe.

branches: 1.47.2; 1.47.4;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.45.2; 1.45.4;
Enable rlphy(4).

branches: 1.44.2;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Compile with -fno-asynchronous-unwind-tables so that gcc doesn't generate
the .eh_frame data area that can be used to aid thr generation of stack
traceback - at a cost of a load of bloat!
Reinstate the isp driver.
Remove the unlikely-to-be-needed esh, lmc and ntwoc.

We don't need 'le' here, I'm not sure amd64 GENERIC deserves it either.

branches: 1.40.6;
Add sk ethernet as found on ASUS A8V.
Increase ramdisk to 5MB, costs virtually nothing.

remove "dev" locators from cardbus device definitions, it doesn't
make sense technically and might be removed

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

Add (commented out) ucycom to various kernel configs.

Add config goo for ath. Tested with a PCI card, detected as:

ath0 at pci0 dev 10 function 0
ath0: interrupting at ioapic0 pin 17 (irq 5)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M bps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 3.6

Cardbus untested, so it is commented out.

Add (commented out) IPSEC_NAT_T option.

branches: 1.34.2;
Added support for amr. Tested by Joseph A. Dacuma with Dell PowerEdge 2800.

Remove 'isp' driver (support for Qlogic ISP [12]0x0 SCSI/FibreChannel).
Compensates for the recent bloat of the ath driver and 802.11 support.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add ukyopon(4).

Comment out options for PPP compression and active filtering. They are not
necessary in an installation kernel but increase the size considerably.
This fixes PR port-amd64/29928.

Comment out some wscons(4) options which are only required to run a
X11 server.

Add attimer(4) configurations everywhere pcppi(4) exists, with the
following rule:
If a pcppi device is enabled for an attachment, enable an attimer for the
same attachement, otherwise comment it.

branches: 1.27.2;
Enable FFS_NO_SNAPSHOT in the INSTALL kernel so that it fits into 2 floppies

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.23.2;
Add "options PMS_SYNAPTICS_TOUCHPAD", commented out by default.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.21.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

Remove some devices (sync with i386).

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add re; Realtek GbE.

Don't need cz or cy devices in INSTALL kernel, and they put space
pressure on install media.

branches: 1.14.2;
Comment out some SYSV* and *VERBOSE options to shrink these down so
they fit in the current boot floppies.

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Trim ramdisk and remove some unneeded options.

Add igphy.

Add ahd, bce, ataraid

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add new per-chip pciide drivers.

Add atabus.

Use MPBIOS_SCANPCI by default.

Remove a lot of stuff, making it closer to the i386 INSTALL.

branches: 1.3.2;
Decrease the ramdisk size a bit to allow for more options to be added
to the kernel, and still have it fit in 2.88M.

Enable ioapics.

Rename the x86_64 port to amd64, as this is the actual name used for
the processor family now. x86_64 is kept as the MACHINE_ARCH value,
since it's already widely used (by e.g. the toolchain, etc), and
by other operating systems.

Whitespace.

propagate drm changes

branches: 1.89.8;
Fix compile error. PR#38480 was correctly fixed in 2009, it's ok to remove
"no options MTRR"

branches: 1.88.8;
First step of random number subsystem rework described in
<20111022023242.BA26F14A158@mail.netbsd.org>. This change includes
the following:

An initial cleanup and minor reorganization of the entropy pool
code in sys/dev/rnd.c and sys/dev/rndpool.c. Several bugs are
fixed. Some effort is made to accumulate entropy more quickly at
boot time.

A generic interface, "rndsink", is added, for stream generators to
request that they be re-keyed with good quality entropy from the pool
as soon as it is available.

The arc4random()/arc4randbytes() implementation in libkern is
adjusted to use the rndsink interface for rekeying, which helps
address the problem of low-quality keys at boot time.

An implementation of the FIPS 140-2 statistical tests for random
number generator quality is provided (libkern/rngtest.c). This
is based on Greg Rose's implementation from Qualcomm.

A new random stream generator, nist_ctr_drbg, is provided. It is
based on an implementation of the NIST SP800-90 CTR_DRBG by
Henric Jungheim. This generator users AES in a modified counter
mode to generate a backtracking-resistant random stream.

An abstraction layer, "cprng", is provided for in-kernel consumers
of randomness. The arc4random/arc4randbytes API is deprecated for
in-kernel use. It is replaced by "cprng_strong". The current
cprng_fast implementation wraps the existing arc4random
implementation. The current cprng_strong implementation wraps the
new CTR_DRBG implementation. Both interfaces are rekeyed from
the entropy pool automatically at intervals justifiable from best
current cryptographic practice.

In some quick tests, cprng_fast() is about the same speed as
the old arc4randbytes(), and cprng_strong() is about 20% faster
than rnd_extract_data(). Performance is expected to improve.

The AES code in src/crypto/rijndael is no longer an optional
kernel component, as it is required by cprng_strong, which is
not an optional kernel component.

The entropy pool output is subjected to the rngtest tests at
startup time; if it fails, the system will reboot. There is
approximately a 3/10000 chance of a false positive from these
tests. Entropy pool _input_ from hardware random numbers is
subjected to the rngtest tests at attach time, as well as the
FIPS continuous-output test, to detect bad or stuck hardware
RNGs; if any are detected, they are detached, but the system
continues to run.

A problem with rndctl(8) is fixed -- datastructures with
pointers in arrays are no longer passed to userspace (this
was not a security problem, but rather a major issue for
compat32). A new kernel will require a new rndctl.

The sysctl kern.arandom() and kern.urandom() nodes are hooked
up to the new generators, but the /dev/*random pseudodevices
are not, yet.

Manual pages for the new kernel interfaces are forthcoming.

branches: 1.87.2;
Finish reverting premature modularization of amd64 kernels.

many whitespace cleanup.

Per mrg@ request, add MFS as default builtin, for things like init(8).

XXX should be replaced by TMPFS eventually.

Build certain file-systems and options(7) as module(7). 32 and 64 bits
support are still builtin, as well as FFS, NFS, TMPFS, and most COMPAT
code. Saves approx. 750kiB.

Reflect this in INSTALL kernel, where we have to support more file systems
statically.

See http://mail-index.netbsd.org/port-amd64/2011/02/13/msg001318.html

attach drm hw drivers to 'drm' not 'vga'

branches: 1.82.4; 1.82.6; 1.82.8;
put back drm.

branches: 1.81.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.80.8;
- Give x86 BIOS boot the ability to load new style modules and pass them
into the kernel. Based on a patch by jmcneill@, with many fixes and
improvements by me.

- Put MEMORY_DISK_DYNAMIC and MODULAR into the GENERIC kernels, so that
you can load miniroot.kmod from the boot blocks and boot into the
installer!

branches: 1.79.2;
Work around PR38480 by making it possible to omit options MTRR from
amd64 INSTALL kernels -- and doing so. At least you can now get an
INSTALL kernel onto a box with this odd MTRR configuration to debug it.

branches: 1.78.6; 1.78.8;
Better description, this is not GENERIC after all.

Use GENERIC for installation as well, just add the ramdisk hooks.

branches: 1.76.4;
arc(4) -> arcmsr(4)

Enable arc(4).

branches: 1.74.2;
PR/37404 - Rui-Xiang Guo -- sync phy list with GENERIC

branches: 1.73.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.72.4;
Fixed indentation (it should be <keyword><space><tab><name><tab><comment>).

branches: 1.71.4; 1.71.8; 1.71.10;
-options I2OVERBOSE.

Enable aac(4) and ld at aac.

add jmide(4), a driver for the JMicron Technology JMB36x PCIe to SATA II/PATA
controllers. These controllers can be found on add-on PCIe cards, or
on some motherboards to provide the PATA connectivity (e.g. some intel
ICH8-based motherboards).

Thanks to JMicron Technology for providing me documentation and
different sample boards for this work.

PR/36234 - Joerg Niendorf -- xi -> xirc

branches: 1.67.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.66.2; 1.66.4;
For the benefit of modern hardware, enable ACPI by default in INSTALL and
GENERIC kernels. If ACPI is an issue on your hardware, 'boot -c' and
'disable acpi' should be a workaround. ACPI-enabled kernels works fine
on pre-acpi hardware.
for amd64:
- add ACPI to INSTALL and GENERIC, remove the *_ACPI config files.
- get rid of the bootfloppy-big.fs boot image, and got to a 3-floppy boot
image
for i386:
- introduce INSTALL_LARGE which has ACPI and some devices with big firmware
- move some devices from INSTALL to INSTALL_LARGE
- Boot floppies still use INSTALL, and bootfloppy-big.fs is still there
(for thoses who want to build el-torito floppy emulation boot CD) and use
INSTALL.
For both, drop the 'iso-image' code in etc/ to make the iso bootable, we'll
use something else to build bootable CDs.

branches: 1.65.2;
Disable wsmouse(4) and all the related low-level drivers The installer
ramdisk doesn't support using the mouse anyway.

Idea provided by Blair Sadewitz in private e-mail.

Uncomment pseudo-device raid and options RAID_AUTOCONFIG, to match
i386's INSTALL. Suggested by Florence HENRY on port-amd64@

Disable ppp(4) because pppd(8) isn't on the installation image anyway.

Add bnx(4), a driver for Broadcom NetXtreme II 10/100/1000 Ethernet device.
Ported from OpenBSD by cube@, with some bus_dma fixes by me.
Tested on i386 and amd64.

Add mfi(4), a driver for LSI Logic & Dell MegaRAID SAS RAID controller.
Ported from OpenBSD, tested on i386 and amd64.

branches: 1.60.2;
Add ahcisata(4), a driver for AHCI 1.0 and 1.1 controllers. Tested on the sata
ports of a Intel 63xxESB chipset. Does not support NCQ yet.

Add support for the Intel 80003 Gigabit Ethernet controller (found e.g. in
newer server chipsets) to wm(4), from the FreeBSD em(4) driver.
While there, add a few other Intel Ethernet controller that should work as
is.
Properly update the RX error and TX collision counters.
Add ikphy(4), a driver for the Intel i82563 Kumeran 10/100/1000 Ethernet PHYs

Sync IDE/SATA drivers with i386/GENERIC. Fixes PR port-amd64/34829.

Add iteide(4) driver to GENERIC and INSTALL kernels; PR# 33426.

branches: 1.56.2;
Add msk and mskc.

branches: 1.55.2;
s/adpater/adapter/

Prompted by PR/34195

branches: 1.54.2;
Add twa(4) and ld at twa

Add entries for svwsata(4) to amd64 GENERIC and INSTALL kernels,
to support SATA ports on Serverworks HT-1000 (aka bcm5785) chips.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

Remove the getwschar and putwschar accessops from wsdisplay drivers as
requested by uwe@. These were wrong because they were receiving an
emulcookie yet they were accessops (thus having to receive an accesscookie).
Instead, just handle the WSDISPLAYIO_{GET,PUT}WSCHAR ioctls from the
driver's ioctl accessop.

As this reduces the amount of code needed to handle these operations to
two small functions in each driver, remove the WSDISPLAY_CHARFUNCS kernel
option.

Reviewed by, at least, uwe@ and macallan@. No objections in tech-kern@.

Added ciss(4). Tested by Joseph Dacuma on HP DL-380 G3 with Smart Array 5i.

Enable rgephy(4), closes PR port-amd64/33117.

branches: 1.48.2;
add nfe.

branches: 1.47.2; 1.47.4;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.45.2; 1.45.4;
Enable rlphy(4).

branches: 1.44.2;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Compile with -fno-asynchronous-unwind-tables so that gcc doesn't generate
the .eh_frame data area that can be used to aid thr generation of stack
traceback - at a cost of a load of bloat!
Reinstate the isp driver.
Remove the unlikely-to-be-needed esh, lmc and ntwoc.

We don't need 'le' here, I'm not sure amd64 GENERIC deserves it either.

branches: 1.40.6;
Add sk ethernet as found on ASUS A8V.
Increase ramdisk to 5MB, costs virtually nothing.

remove "dev" locators from cardbus device definitions, it doesn't
make sense technically and might be removed

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

Add (commented out) ucycom to various kernel configs.

Add config goo for ath. Tested with a PCI card, detected as:

ath0 at pci0 dev 10 function 0
ath0: interrupting at ioapic0 pin 17 (irq 5)
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36M bps 48Mbps 54Mbps
ath0: mac 5.9 phy 4.3 radio 3.6

Cardbus untested, so it is commented out.

Add (commented out) IPSEC_NAT_T option.

branches: 1.34.2;
Added support for amr. Tested by Joseph A. Dacuma with Dell PowerEdge 2800.

Remove 'isp' driver (support for Qlogic ISP [12]0x0 SCSI/FibreChannel).
Compensates for the recent bloat of the ath driver and 802.11 support.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add ukyopon(4).

Comment out options for PPP compression and active filtering. They are not
necessary in an installation kernel but increase the size considerably.
This fixes PR port-amd64/29928.

Comment out some wscons(4) options which are only required to run a
X11 server.

Add attimer(4) configurations everywhere pcppi(4) exists, with the
following rule:
If a pcppi device is enabled for an attachment, enable an attimer for the
same attachement, otherwise comment it.

branches: 1.27.2;
Enable FFS_NO_SNAPSHOT in the INSTALL kernel so that it fits into 2 floppies

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.23.2;
Add "options PMS_SYNAPTICS_TOUCHPAD", commented out by default.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.21.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

Remove some devices (sync with i386).

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add re; Realtek GbE.

Don't need cz or cy devices in INSTALL kernel, and they put space
pressure on install media.

branches: 1.14.2;
Comment out some SYSV* and *VERBOSE options to shrink these down so
they fit in the current boot floppies.

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

Trim ramdisk and remove some unneeded options.

Add igphy.

Add ahd, bce, ataraid

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add new per-chip pciide drivers.

Add atabus.

Use MPBIOS_SCANPCI by default.

Remove a lot of stuff, making it closer to the i386 INSTALL.

branches: 1.3.2;
Decrease the ramdisk size a bit to allow for more options to be added
to the kernel, and still have it fit in 2.88M.

Enable ioapics.

Rename the x86_64 port to amd64, as this is the actual name used for
the processor family now. x86_64 is kept as the MACHINE_ARCH value,
since it's already widely used (by e.g. the toolchain, etc), and
by other operating systems.