New man page from Dan Plassche.

Move sysinst man page next to the source

move creds_msdos.8 into the normal place and install it.

Remove compat_osf1, discussed on tech-kern@.

Retire compat_ibcs2, as discussed on tech-kern@. FreeBSD did the same
recently.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

branches: 1.105.2; 1.105.4;
Remove port-acorn26

OK core@

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

Move shared x86 man pages from man8.i386 to man8.x86.

branches: 1.102.6;

introduce evbarm bootmini2440(8) man entry.

branches: 1.101.4;
Remove PECOFF/Win32 emulation.

Move security(8) to the section 7. Discussed on source-changes a while back.
Should address PR # 35718 at least partially.

introduce sandpoint satmgr(4) and altboot(8) man page entries.

Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

branches: 1.97.2;
Briefly note /etc/rc.local in rc(8).

Install rescue(8)

fixed botched update in last

Document the -1 and -2 options, and include this in amd64 as well as i386

Fixes my PR/38816

Following input from Matthew Mondor, some Veriexec documentation changes:

- Document the signatures file format in a veriexec(5) man-page,
- Document the strict levels and a general Veriexec intro in veriexec(8)
instead of security(8).

Okay blymn@.

-compat_hpux

Remove the section 8 pmppc manpages

branches: 1.90.4;
add compat_darwin(8) to build

Add a (very rudimentary) man page for sysinst. Although sysinst doesn't
appear in installed systems, other documents might want to refer to it
via ".Xr sysinst 8".

Add a man page for MAKEDEV.local(8), and a link for makedev.local(8).

Build man8.sgimips. Alphabetise the list.

branches: 1.86.2;
First take of MI boot(8) man-page, suggested by agc@.

Okay agc@.

First shot at a security(8) man-page, a quick guide for some NetBSD
security features.

Install compat_30.8 [hi chap!].

Descend into man8.prep

Descend into man8.hpcarm so that hpcarm's boot(8) actually gets installed.

Move to the genassym source directory.

Move /etc/postinstall (and the etc.tgz set) to /usr/sbin/postinstall
(and the base.tgz set).

Add postinstall(8) man page.

Add a pam(8) manual page that gives a brief introduction as to what PAM
is. The gritty details will be in pam.conf(5).

Move yp(8) to nis(8).

Descend into man8.hp700.

Descend into man8.hpcsh.
Add boot(8) for hpcsh to lists.

Add hpcboot(8).

reformat the SUBDIR section to make it fit in less than 80 columns

Add NetBSD/acorn32 boot manpage

Sticky belongs in section 7.

Add boot(8) manual page for the Cobalt port.

Add boot(8) man page for pmppc.

Use ${HOST_SH} instead of `sh'.

If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.

switch to unified MAKEDEV(8) - the manpage now contains list of
all devices for all platforms

Add man8.ibmnws and MAKEDEV(8) for ibmnws.

add evbsh5 MAKEDEV(8) manpage

x86_64 -> amd64

Add manual page for wizd(8).

Delete man8.walnut, and add man8.evbppc.

add afterboot.8 here. pointed out by Julio Merino

Add auto-generated MAKEDEV(8) for ofppc.

Add MAKEDEV(8) for x86_64.

Add and descend into man8.cesfic, man8.evbmips, man8.hp700, man8.hpcarm, and
man8.sbmips, and add MAKEDEV.8 for each of them.

Add MAKEDEV(8) for pmppc, and install it.

Fix PR 13923:
Rewrite MAKEDEV2manpage.pl in AWK and sh.
Add makedevs target to create MAKEDEV.8 man pages

Reviewed by Thomas Klausner.

Add MAKEDEV(8) for algor, cats, evbsh3, mvmeppc, playstation2, shark;
remove the one for arm32.

Move manual pages, man[48].arm26 -> man[48].acorn26.

rc.subr(8) - functions used by system shell scripts. Closes PR [misc/10828].

Added a page describing how to set up HP-UX emulation on m68k-based systems.

Add MAKEDEV(8) for acorn32 and necessary directories.

Add MAKEDEV(8) for evbarm

Add man8.netwinder (for MAKEDEV.8), and descend into it.

Add documentation for COMPAT_SVR4_32.

Add support files for the Walnut.

MAKEDEV(8) for all remaining platforms that have a MAKEDEV script.

Install compat_netbsd32.8.

add compat_netbsd32(8); clarify compat_sunos(8) on netbsd/sparc64.

Descent into man8.dreamcast.

Descend into man8.macppc.

add man8.prep

Alias compat_win32.8 and peace.8.

Fix missing backslash in last commit.

Move the BBBB man page out of the kernel tree, since it needs to be built on
all architectures and non-arm26 systems won't descend into sys/arch/arm26.

Add compat_pecoff(8) manpage.

branches: 1.36.4;
link rc(8) to rc.shutdown(8) and rc.d(8). clean up other MLINKS entries.

to make binary snapshot

We have useradd(8) now.

branches: 1.33.2;
Added a compat_osf1(8) man page.

branches: 1.32.2;
Add MAKEDEV.8 manpage for next68k.

Add man8.bebox.

sort properly. hpcmips doesn't come after x68k.

Add man8.hpcmips.

compat_ibcs2.8 was missing from MAN list. also, alphabetize MAN list

reference nsswitch.conf(5) as necessary
change references from YP to NIS.

oops, s/sparc/sparc64/ for one of the "man8.sparc" entries. from bernd.

add man8.sparc64

Link compat_svr4 to compat_sco, compat_solaris and compat_xenix
Mention what exactly has been tested (for SCO, esp.) in the manpage.

Remove man?.sun3x

Use bsd.man.mk and bsd.subdir.mk as appropriate.

Add man8.pc532.

add alpha, mvme68k and sun3x subdirs.

Add man page describing setup for Ultrix compatibility.

Add man8.pmax, man8.x68k

Add scripts and documentation for a new method to create assym.h files.
With the kern/genassym.sh script HOSTED_CC is no longer used to create
assym.h files. This should make crosscompilation easier.

removed tahoe refs because we have no tahoe port

Add compat_freebsd.8

Install the compat_svr4(8) manual page.

Make the man8.arm32 sub directory.

merge in changes from 1.1 release branch

branches: 1.11.2;
Add man8.sun3

Added compat_linux.8 to Makefile

specify man pages the new way.

Merged with 4.4lite.
Changed to conform to NetBSD's new RCS Id conventions.

man page bywr and I

branches: 1.6.2;
add compat_sunos(8) and man8.sparc

added man8.amiga.

add yp.8

Add man8.mac68k to SUBDIR and alphabetized it.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

Move sysinst man page next to the source

move creds_msdos.8 into the normal place and install it.

Remove compat_osf1, discussed on tech-kern@.

Retire compat_ibcs2, as discussed on tech-kern@. FreeBSD did the same
recently.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

branches: 1.105.2; 1.105.4;
Remove port-acorn26

OK core@

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

Move shared x86 man pages from man8.i386 to man8.x86.

branches: 1.102.6;

introduce evbarm bootmini2440(8) man entry.

branches: 1.101.4;
Remove PECOFF/Win32 emulation.

Move security(8) to the section 7. Discussed on source-changes a while back.
Should address PR # 35718 at least partially.

introduce sandpoint satmgr(4) and altboot(8) man page entries.

Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

branches: 1.97.2;
Briefly note /etc/rc.local in rc(8).

Install rescue(8)

fixed botched update in last

Document the -1 and -2 options, and include this in amd64 as well as i386

Fixes my PR/38816

Following input from Matthew Mondor, some Veriexec documentation changes:

- Document the signatures file format in a veriexec(5) man-page,
- Document the strict levels and a general Veriexec intro in veriexec(8)
instead of security(8).

Okay blymn@.

-compat_hpux

Remove the section 8 pmppc manpages

branches: 1.90.4;
add compat_darwin(8) to build

Add a (very rudimentary) man page for sysinst. Although sysinst doesn't
appear in installed systems, other documents might want to refer to it
via ".Xr sysinst 8".

Add a man page for MAKEDEV.local(8), and a link for makedev.local(8).

Build man8.sgimips. Alphabetise the list.

branches: 1.86.2;
First take of MI boot(8) man-page, suggested by agc@.

Okay agc@.

First shot at a security(8) man-page, a quick guide for some NetBSD
security features.

Install compat_30.8 [hi chap!].

Descend into man8.prep

Descend into man8.hpcarm so that hpcarm's boot(8) actually gets installed.

Move to the genassym source directory.

Move /etc/postinstall (and the etc.tgz set) to /usr/sbin/postinstall
(and the base.tgz set).

Add postinstall(8) man page.

Add a pam(8) manual page that gives a brief introduction as to what PAM
is. The gritty details will be in pam.conf(5).

Move yp(8) to nis(8).

Descend into man8.hp700.

Descend into man8.hpcsh.
Add boot(8) for hpcsh to lists.

Add hpcboot(8).

reformat the SUBDIR section to make it fit in less than 80 columns

Add NetBSD/acorn32 boot manpage

Sticky belongs in section 7.

Add boot(8) manual page for the Cobalt port.

Add boot(8) man page for pmppc.

Use ${HOST_SH} instead of `sh'.

If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.

switch to unified MAKEDEV(8) - the manpage now contains list of
all devices for all platforms

Add man8.ibmnws and MAKEDEV(8) for ibmnws.

add evbsh5 MAKEDEV(8) manpage

x86_64 -> amd64

Add manual page for wizd(8).

Delete man8.walnut, and add man8.evbppc.

add afterboot.8 here. pointed out by Julio Merino

Add auto-generated MAKEDEV(8) for ofppc.

Add MAKEDEV(8) for x86_64.

Add and descend into man8.cesfic, man8.evbmips, man8.hp700, man8.hpcarm, and
man8.sbmips, and add MAKEDEV.8 for each of them.

Add MAKEDEV(8) for pmppc, and install it.

Fix PR 13923:
Rewrite MAKEDEV2manpage.pl in AWK and sh.
Add makedevs target to create MAKEDEV.8 man pages

Reviewed by Thomas Klausner.

Add MAKEDEV(8) for algor, cats, evbsh3, mvmeppc, playstation2, shark;
remove the one for arm32.

Move manual pages, man[48].arm26 -> man[48].acorn26.

rc.subr(8) - functions used by system shell scripts. Closes PR [misc/10828].

Added a page describing how to set up HP-UX emulation on m68k-based systems.

Add MAKEDEV(8) for acorn32 and necessary directories.

Add MAKEDEV(8) for evbarm

Add man8.netwinder (for MAKEDEV.8), and descend into it.

Add documentation for COMPAT_SVR4_32.

Add support files for the Walnut.

MAKEDEV(8) for all remaining platforms that have a MAKEDEV script.

Install compat_netbsd32.8.

add compat_netbsd32(8); clarify compat_sunos(8) on netbsd/sparc64.

Descent into man8.dreamcast.

Descend into man8.macppc.

add man8.prep

Alias compat_win32.8 and peace.8.

Fix missing backslash in last commit.

Move the BBBB man page out of the kernel tree, since it needs to be built on
all architectures and non-arm26 systems won't descend into sys/arch/arm26.

Add compat_pecoff(8) manpage.

branches: 1.36.4;
link rc(8) to rc.shutdown(8) and rc.d(8). clean up other MLINKS entries.

to make binary snapshot

We have useradd(8) now.

branches: 1.33.2;
Added a compat_osf1(8) man page.

branches: 1.32.2;
Add MAKEDEV.8 manpage for next68k.

Add man8.bebox.

sort properly. hpcmips doesn't come after x68k.

Add man8.hpcmips.

compat_ibcs2.8 was missing from MAN list. also, alphabetize MAN list

reference nsswitch.conf(5) as necessary
change references from YP to NIS.

oops, s/sparc/sparc64/ for one of the "man8.sparc" entries. from bernd.

add man8.sparc64

Link compat_svr4 to compat_sco, compat_solaris and compat_xenix
Mention what exactly has been tested (for SCO, esp.) in the manpage.

Remove man?.sun3x

Use bsd.man.mk and bsd.subdir.mk as appropriate.

Add man8.pc532.

add alpha, mvme68k and sun3x subdirs.

Add man page describing setup for Ultrix compatibility.

Add man8.pmax, man8.x68k

Add scripts and documentation for a new method to create assym.h files.
With the kern/genassym.sh script HOSTED_CC is no longer used to create
assym.h files. This should make crosscompilation easier.

removed tahoe refs because we have no tahoe port

Add compat_freebsd.8

Install the compat_svr4(8) manual page.

Make the man8.arm32 sub directory.

merge in changes from 1.1 release branch

branches: 1.11.2;
Add man8.sun3

Added compat_linux.8 to Makefile

specify man pages the new way.

Merged with 4.4lite.
Changed to conform to NetBSD's new RCS Id conventions.

man page bywr and I

branches: 1.6.2;
add compat_sunos(8) and man8.sparc

added man8.amiga.

add yp.8

Add man8.mac68k to SUBDIR and alphabetized it.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

move creds_msdos.8 into the normal place and install it.

Remove compat_osf1, discussed on tech-kern@.

Retire compat_ibcs2, as discussed on tech-kern@. FreeBSD did the same
recently.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

branches: 1.105.2; 1.105.4;
Remove port-acorn26

OK core@

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

Move shared x86 man pages from man8.i386 to man8.x86.

branches: 1.102.6;

introduce evbarm bootmini2440(8) man entry.

branches: 1.101.4;
Remove PECOFF/Win32 emulation.

Move security(8) to the section 7. Discussed on source-changes a while back.
Should address PR # 35718 at least partially.

introduce sandpoint satmgr(4) and altboot(8) man page entries.

Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

branches: 1.97.2;
Briefly note /etc/rc.local in rc(8).

Install rescue(8)

fixed botched update in last

Document the -1 and -2 options, and include this in amd64 as well as i386

Fixes my PR/38816

Following input from Matthew Mondor, some Veriexec documentation changes:

- Document the signatures file format in a veriexec(5) man-page,
- Document the strict levels and a general Veriexec intro in veriexec(8)
instead of security(8).

Okay blymn@.

-compat_hpux

Remove the section 8 pmppc manpages

branches: 1.90.4;
add compat_darwin(8) to build

Add a (very rudimentary) man page for sysinst. Although sysinst doesn't
appear in installed systems, other documents might want to refer to it
via ".Xr sysinst 8".

Add a man page for MAKEDEV.local(8), and a link for makedev.local(8).

Build man8.sgimips. Alphabetise the list.

branches: 1.86.2;
First take of MI boot(8) man-page, suggested by agc@.

Okay agc@.

First shot at a security(8) man-page, a quick guide for some NetBSD
security features.

Install compat_30.8 [hi chap!].

Descend into man8.prep

Descend into man8.hpcarm so that hpcarm's boot(8) actually gets installed.

Move to the genassym source directory.

Move /etc/postinstall (and the etc.tgz set) to /usr/sbin/postinstall
(and the base.tgz set).

Add postinstall(8) man page.

Add a pam(8) manual page that gives a brief introduction as to what PAM
is. The gritty details will be in pam.conf(5).

Move yp(8) to nis(8).

Descend into man8.hp700.

Descend into man8.hpcsh.
Add boot(8) for hpcsh to lists.

Add hpcboot(8).

reformat the SUBDIR section to make it fit in less than 80 columns

Add NetBSD/acorn32 boot manpage

Sticky belongs in section 7.

Add boot(8) manual page for the Cobalt port.

Add boot(8) man page for pmppc.

Use ${HOST_SH} instead of `sh'.

If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.

switch to unified MAKEDEV(8) - the manpage now contains list of
all devices for all platforms

Add man8.ibmnws and MAKEDEV(8) for ibmnws.

add evbsh5 MAKEDEV(8) manpage

x86_64 -> amd64

Add manual page for wizd(8).

Delete man8.walnut, and add man8.evbppc.

add afterboot.8 here. pointed out by Julio Merino

Add auto-generated MAKEDEV(8) for ofppc.

Add MAKEDEV(8) for x86_64.

Add and descend into man8.cesfic, man8.evbmips, man8.hp700, man8.hpcarm, and
man8.sbmips, and add MAKEDEV.8 for each of them.

Add MAKEDEV(8) for pmppc, and install it.

Fix PR 13923:
Rewrite MAKEDEV2manpage.pl in AWK and sh.
Add makedevs target to create MAKEDEV.8 man pages

Reviewed by Thomas Klausner.

Add MAKEDEV(8) for algor, cats, evbsh3, mvmeppc, playstation2, shark;
remove the one for arm32.

Move manual pages, man[48].arm26 -> man[48].acorn26.

rc.subr(8) - functions used by system shell scripts. Closes PR [misc/10828].

Added a page describing how to set up HP-UX emulation on m68k-based systems.

Add MAKEDEV(8) for acorn32 and necessary directories.

Add MAKEDEV(8) for evbarm

Add man8.netwinder (for MAKEDEV.8), and descend into it.

Add documentation for COMPAT_SVR4_32.

Add support files for the Walnut.

MAKEDEV(8) for all remaining platforms that have a MAKEDEV script.

Install compat_netbsd32.8.

add compat_netbsd32(8); clarify compat_sunos(8) on netbsd/sparc64.

Descent into man8.dreamcast.

Descend into man8.macppc.

add man8.prep

Alias compat_win32.8 and peace.8.

Fix missing backslash in last commit.

Move the BBBB man page out of the kernel tree, since it needs to be built on
all architectures and non-arm26 systems won't descend into sys/arch/arm26.

Add compat_pecoff(8) manpage.

branches: 1.36.4;
link rc(8) to rc.shutdown(8) and rc.d(8). clean up other MLINKS entries.

to make binary snapshot

We have useradd(8) now.

branches: 1.33.2;
Added a compat_osf1(8) man page.

branches: 1.32.2;
Add MAKEDEV.8 manpage for next68k.

Add man8.bebox.

sort properly. hpcmips doesn't come after x68k.

Add man8.hpcmips.

compat_ibcs2.8 was missing from MAN list. also, alphabetize MAN list

reference nsswitch.conf(5) as necessary
change references from YP to NIS.

oops, s/sparc/sparc64/ for one of the "man8.sparc" entries. from bernd.

add man8.sparc64

Link compat_svr4 to compat_sco, compat_solaris and compat_xenix
Mention what exactly has been tested (for SCO, esp.) in the manpage.

Remove man?.sun3x

Use bsd.man.mk and bsd.subdir.mk as appropriate.

Add man8.pc532.

add alpha, mvme68k and sun3x subdirs.

Add man page describing setup for Ultrix compatibility.

Add man8.pmax, man8.x68k

Add scripts and documentation for a new method to create assym.h files.
With the kern/genassym.sh script HOSTED_CC is no longer used to create
assym.h files. This should make crosscompilation easier.

removed tahoe refs because we have no tahoe port

Add compat_freebsd.8

Install the compat_svr4(8) manual page.

Make the man8.arm32 sub directory.

merge in changes from 1.1 release branch

branches: 1.11.2;
Add man8.sun3

Added compat_linux.8 to Makefile

specify man pages the new way.

Merged with 4.4lite.
Changed to conform to NetBSD's new RCS Id conventions.

man page bywr and I

branches: 1.6.2;
add compat_sunos(8) and man8.sparc

added man8.amiga.

add yp.8

Add man8.mac68k to SUBDIR and alphabetized it.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

Remove compat_osf1, discussed on tech-kern@.

Retire compat_ibcs2, as discussed on tech-kern@. FreeBSD did the same
recently.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

branches: 1.105.2;
Remove port-acorn26

OK core@

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

Move shared x86 man pages from man8.i386 to man8.x86.

branches: 1.102.6;

introduce evbarm bootmini2440(8) man entry.

branches: 1.101.4;
Remove PECOFF/Win32 emulation.

Move security(8) to the section 7. Discussed on source-changes a while back.
Should address PR # 35718 at least partially.

introduce sandpoint satmgr(4) and altboot(8) man page entries.

Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

branches: 1.97.2;
Briefly note /etc/rc.local in rc(8).

Install rescue(8)

fixed botched update in last

Document the -1 and -2 options, and include this in amd64 as well as i386

Fixes my PR/38816

Following input from Matthew Mondor, some Veriexec documentation changes:

- Document the signatures file format in a veriexec(5) man-page,
- Document the strict levels and a general Veriexec intro in veriexec(8)
instead of security(8).

Okay blymn@.

-compat_hpux

Remove the section 8 pmppc manpages

branches: 1.90.4;
add compat_darwin(8) to build

Add a (very rudimentary) man page for sysinst. Although sysinst doesn't
appear in installed systems, other documents might want to refer to it
via ".Xr sysinst 8".

Add a man page for MAKEDEV.local(8), and a link for makedev.local(8).

Build man8.sgimips. Alphabetise the list.

branches: 1.86.2;
First take of MI boot(8) man-page, suggested by agc@.

Okay agc@.

First shot at a security(8) man-page, a quick guide for some NetBSD
security features.

Install compat_30.8 [hi chap!].

Descend into man8.prep

Descend into man8.hpcarm so that hpcarm's boot(8) actually gets installed.

Move to the genassym source directory.

Move /etc/postinstall (and the etc.tgz set) to /usr/sbin/postinstall
(and the base.tgz set).

Add postinstall(8) man page.

Add a pam(8) manual page that gives a brief introduction as to what PAM
is. The gritty details will be in pam.conf(5).

Move yp(8) to nis(8).

Descend into man8.hp700.

Descend into man8.hpcsh.
Add boot(8) for hpcsh to lists.

Add hpcboot(8).

reformat the SUBDIR section to make it fit in less than 80 columns

Add NetBSD/acorn32 boot manpage

Sticky belongs in section 7.

Add boot(8) manual page for the Cobalt port.

Add boot(8) man page for pmppc.

Use ${HOST_SH} instead of `sh'.

If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.

switch to unified MAKEDEV(8) - the manpage now contains list of
all devices for all platforms

Add man8.ibmnws and MAKEDEV(8) for ibmnws.

add evbsh5 MAKEDEV(8) manpage

x86_64 -> amd64

Add manual page for wizd(8).

Delete man8.walnut, and add man8.evbppc.

add afterboot.8 here. pointed out by Julio Merino

Add auto-generated MAKEDEV(8) for ofppc.

Add MAKEDEV(8) for x86_64.

Add and descend into man8.cesfic, man8.evbmips, man8.hp700, man8.hpcarm, and
man8.sbmips, and add MAKEDEV.8 for each of them.

Add MAKEDEV(8) for pmppc, and install it.

Fix PR 13923:
Rewrite MAKEDEV2manpage.pl in AWK and sh.
Add makedevs target to create MAKEDEV.8 man pages

Reviewed by Thomas Klausner.

Add MAKEDEV(8) for algor, cats, evbsh3, mvmeppc, playstation2, shark;
remove the one for arm32.

Move manual pages, man[48].arm26 -> man[48].acorn26.

rc.subr(8) - functions used by system shell scripts. Closes PR [misc/10828].

Added a page describing how to set up HP-UX emulation on m68k-based systems.

Add MAKEDEV(8) for acorn32 and necessary directories.

Add MAKEDEV(8) for evbarm

Add man8.netwinder (for MAKEDEV.8), and descend into it.

Add documentation for COMPAT_SVR4_32.

Add support files for the Walnut.

MAKEDEV(8) for all remaining platforms that have a MAKEDEV script.

Install compat_netbsd32.8.

add compat_netbsd32(8); clarify compat_sunos(8) on netbsd/sparc64.

Descent into man8.dreamcast.

Descend into man8.macppc.

add man8.prep

Alias compat_win32.8 and peace.8.

Fix missing backslash in last commit.

Move the BBBB man page out of the kernel tree, since it needs to be built on
all architectures and non-arm26 systems won't descend into sys/arch/arm26.

Add compat_pecoff(8) manpage.

branches: 1.36.4;
link rc(8) to rc.shutdown(8) and rc.d(8). clean up other MLINKS entries.

to make binary snapshot

We have useradd(8) now.

branches: 1.33.2;
Added a compat_osf1(8) man page.

branches: 1.32.2;
Add MAKEDEV.8 manpage for next68k.

Add man8.bebox.

sort properly. hpcmips doesn't come after x68k.

Add man8.hpcmips.

compat_ibcs2.8 was missing from MAN list. also, alphabetize MAN list

reference nsswitch.conf(5) as necessary
change references from YP to NIS.

oops, s/sparc/sparc64/ for one of the "man8.sparc" entries. from bernd.

add man8.sparc64

Link compat_svr4 to compat_sco, compat_solaris and compat_xenix
Mention what exactly has been tested (for SCO, esp.) in the manpage.

Remove man?.sun3x

Use bsd.man.mk and bsd.subdir.mk as appropriate.

Add man8.pc532.

add alpha, mvme68k and sun3x subdirs.

Add man page describing setup for Ultrix compatibility.

Add man8.pmax, man8.x68k

Add scripts and documentation for a new method to create assym.h files.
With the kern/genassym.sh script HOSTED_CC is no longer used to create
assym.h files. This should make crosscompilation easier.

removed tahoe refs because we have no tahoe port

Add compat_freebsd.8

Install the compat_svr4(8) manual page.

Make the man8.arm32 sub directory.

merge in changes from 1.1 release branch

branches: 1.11.2;
Add man8.sun3

Added compat_linux.8 to Makefile

specify man pages the new way.

Merged with 4.4lite.
Changed to conform to NetBSD's new RCS Id conventions.

man page bywr and I

branches: 1.6.2;
add compat_sunos(8) and man8.sparc

added man8.amiga.

add yp.8

Add man8.mac68k to SUBDIR and alphabetized it.

Add RCS indentifiers.

branches: 1.1.1;
Initial revision

Remove port-acorn26

OK core@

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

Move shared x86 man pages from man8.i386 to man8.x86.

branches: 1.102.6;

introduce evbarm bootmini2440(8) man entry.

branches: 1.101.4;
Remove PECOFF/Win32 emulation.

Move security(8) to the section 7. Discussed on source-changes a while back.
Should address PR # 35718 at least partially.

introduce sandpoint satmgr(4) and altboot(8) man page entries.

Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

branches: 1.97.2;
Briefly note /etc/rc.local in rc(8).

Install rescue(8)

fixed botched update in last

Document the -1 and -2 options, and include this in amd64 as well as i386

Fixes my PR/38816

Following input from Matthew Mondor, some Veriexec documentation changes:

- Document the signatures file format in a veriexec(5) man-page,
- Document the strict levels and a general Veriexec intro in veriexec(8)
instead of security(8).

Okay blymn@.

-compat_hpux

Remove the section 8 pmppc manpages

branches: 1.90.4;
add compat_darwin(8) to build

Add a (very rudimentary) man page for sysinst. Although sysinst doesn't
appear in installed systems, other documents might want to refer to it
via ".Xr sysinst 8".

Add a man page for MAKEDEV.local(8), and a link for makedev.local(8).

Build man8.sgimips. Alphabetise the list.

branches: 1.86.2;
First take of MI boot(8) man-page, suggested by agc@.

Okay agc@.

First shot at a security(8) man-page, a quick guide for some NetBSD
security features.

Install compat_30.8 [hi chap!].

Descend into man8.prep

Descend into man8.hpcarm so that hpcarm's boot(8) actually gets installed.

Move to the genassym source directory.

Move /etc/postinstall (and the etc.tgz set) to /usr/sbin/postinstall
(and the base.tgz set).

Add postinstall(8) man page.

Add a pam(8) manual page that gives a brief introduction as to what PAM
is. The gritty details will be in pam.conf(5).

Move yp(8) to nis(8).

Descend into man8.hp700.

Descend into man8.hpcsh.
Add boot(8) for hpcsh to lists.

Add hpcboot(8).

reformat the SUBDIR section to make it fit in less than 80 columns

Add NetBSD/acorn32 boot manpage

Sticky belongs in section 7.

Add boot(8) manual page for the Cobalt port.