Remove Tn.

Typo fixes from Eitan Adler.

Remove workaround for ancient HTML generation code.

New sentence, new line.

Don't use conditional macros to comment out parts of the FreeBSD man
page, just use comments. Use proper table markup. Improve spacing.

branches: 1.31.20;
Add 29160 to list of supported devices. List it as ASC-29160 instead
of AHA- because that's what the packaging says (apparently short for
"Adaptec SCSI Card 29160", also on the packaging). Tested on
netbsd-4/i386.

Like pavel's, mine also works at Ultra160:
ahc2 at pci1 dev 5 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc2: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
st0 at scsibus1 target 5 lun 0: <CERTANCE, ULTRIUM 2, 1914> tape removable
st0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers

Bump date.

branches: 1.30.2;
Do not warn that Ultra160 controllers are limited to 80MB/s. My AHA 29160
works in the Ultra160 mode:

ahc0 at pci0 dev 6 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc0: interrupting at eb164 irq 0
ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc0: 16 targets, 8 luns per target
sd1 at scsibus1 target 0 lun 0: <SEAGATE, ST336607LW, 0007> disk fixed
sd1: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 8 lun 0: <SEAGATE, ST336607LW, 0007> disk fixed
sd2: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing

(Those two drives can read at a speed of 64 MB/s each, in parallel.)

Bump date.

-avoid references to the cardbus "dev" locator, this doesn't make
sense technically and should be removed

Xref ahd.4.

Document AHC_CARDBUS_DEFAULT_SCSI_ID.

branches: 1.26.6;
Quote Cd argument.

busses -> buses, from jmc@openbsd.

DMA, not dma nor Dma.

Uppercase prom and eeprom.

"Utilize" has exactly the same meaning as "use," but it is more
difficult to read and understand. Most manuals of English style
therefore say that you should use "use".

Fix AHC_NO_TAGS to actually disable tagged queuing, and document.

branches: 1.20.2;
Generate <>& symbolically. I'm avoiding .../dist/... directories for now.

Whitespace&punctuation fixes, sort SEE ALSO, sort sections, drop .Pp's,
swap empty lines for .Pp's.

Clarify some description about AHA-2920 support in the HARDWARE section:
- AHA-2920C has the Adaptec AIC-7850 and is supported by ahc(4)
- AHA-2920/A use the Future Domain 36C70 chips and they are
not supported by ahc(4)

Typos/whitespace.

GC spurious blank lines.

GC spurious blank lines.

merge changes in FreeBSD.
XXX - supported hardware list is somewhat awful...

Update for new CardBus devices.

Updates - primarily from Thomas Klausner

More small changes to standardise a HARDWARE section and clarify some
supported hardware

Misc small fixes to try to standardise the format to make it easier
to parse by an automated script (say one that just might want to
generate webpage summaries of available drivers :)

branches: 1.9.6;
More and more of .Os cleanups. .Os is defined in the tmac.doc-common file,
so we shouldn't override it with versions in the manpages. Many more to
come.

Marathon man page editing session to fix broken .Xr's, add important
references, add a little white space here & there for readability,
clean up some mdoc(7) macro usage and so on. Whew!

macroize BSD, NetBSD, FreeBSD and misc cleanup

These problems are fixed by thorpej's ahc->sc_xxxq, since Dec 02 1996.

* Remove bug warning about not handling wide-SCSI from manpage: fixed
by thorpej's addition of max_target handling to the ahc driver. XXX
* XXX Are other bugs still present as of 1.2C?

add missing comma; fixes PR 3037.

Reference the cd, sd, and st man pages

add configuration of AHA-284x VL front-end.
merge two bugs section.

branches: 1.1.1; 1.1.2;
Add man page aic7xxx driver ; from pr port-i386/2600
That pr put this file in man4.i386, but since the driver isn't i386
specific, I thought it should go here instead.

Typo fixes from Eitan Adler.

Remove workaround for ancient HTML generation code.

New sentence, new line.

Don't use conditional macros to comment out parts of the FreeBSD man
page, just use comments. Use proper table markup. Improve spacing.

branches: 1.31.20;
Add 29160 to list of supported devices. List it as ASC-29160 instead
of AHA- because that's what the packaging says (apparently short for
"Adaptec SCSI Card 29160", also on the packaging). Tested on
netbsd-4/i386.

Like pavel's, mine also works at Ultra160:
ahc2 at pci1 dev 5 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc2: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
st0 at scsibus1 target 5 lun 0: <CERTANCE, ULTRIUM 2, 1914> tape removable
st0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers

Bump date.

branches: 1.30.2;
Do not warn that Ultra160 controllers are limited to 80MB/s. My AHA 29160
works in the Ultra160 mode:

ahc0 at pci0 dev 6 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc0: interrupting at eb164 irq 0
ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc0: 16 targets, 8 luns per target
sd1 at scsibus1 target 0 lun 0: <SEAGATE, ST336607LW, 0007> disk fixed
sd1: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 8 lun 0: <SEAGATE, ST336607LW, 0007> disk fixed
sd2: sync (12.50ns offset 63), 16-bit (160.000MB/s) transfers, tagged queueing

(Those two drives can read at a speed of 64 MB/s each, in parallel.)

Bump date.

-avoid references to the cardbus "dev" locator, this doesn't make
sense technically and should be removed

Xref ahd.4.

Document AHC_CARDBUS_DEFAULT_SCSI_ID.

branches: 1.26.6;
Quote Cd argument.

busses -> buses, from jmc@openbsd.

DMA, not dma nor Dma.

Uppercase prom and eeprom.

"Utilize" has exactly the same meaning as "use," but it is more
difficult to read and understand. Most manuals of English style
therefore say that you should use "use".

Fix AHC_NO_TAGS to actually disable tagged queuing, and document.

branches: 1.20.2;
Generate <>& symbolically. I'm avoiding .../dist/... directories for now.

Whitespace&punctuation fixes, sort SEE ALSO, sort sections, drop .Pp's,
swap empty lines for .Pp's.

Clarify some description about AHA-2920 support in the HARDWARE section:
- AHA-2920C has the Adaptec AIC-7850 and is supported by ahc(4)
- AHA-2920/A use the Future Domain 36C70 chips and they are
not supported by ahc(4)

Typos/whitespace.

GC spurious blank lines.

GC spurious blank lines.

merge changes in FreeBSD.
XXX - supported hardware list is somewhat awful...

Update for new CardBus devices.

Updates - primarily from Thomas Klausner

More small changes to standardise a HARDWARE section and clarify some
supported hardware

Misc small fixes to try to standardise the format to make it easier
to parse by an automated script (say one that just might want to
generate webpage summaries of available drivers :)

branches: 1.9.6;
More and more of .Os cleanups. .Os is defined in the tmac.doc-common file,
so we shouldn't override it with versions in the manpages. Many more to
come.

Marathon man page editing session to fix broken .Xr's, add important
references, add a little white space here & there for readability,
clean up some mdoc(7) macro usage and so on. Whew!

macroize BSD, NetBSD, FreeBSD and misc cleanup

These problems are fixed by thorpej's ahc->sc_xxxq, since Dec 02 1996.

* Remove bug warning about not handling wide-SCSI from manpage: fixed
by thorpej's addition of max_target handling to the ahc driver. XXX
* XXX Are other bugs still present as of 1.2C?

add missing comma; fixes PR 3037.

Reference the cd, sd, and st man pages

add configuration of AHA-284x VL front-end.
merge two bugs section.

branches: 1.1.1; 1.1.2;
Add man page aic7xxx driver ; from pr port-i386/2600
That pr put this file in man4.i386, but since the driver isn't i386
specific, I thought it should go here instead.