Revert addition of pthread dependency on sqlite.

It is less trivial than expected and introduced some surprising breakage.

sqlite: do not build without multithreading support

at least a few pkgsrc packages avoid base sqlite because it fails
this check, and it's probably a surprising performance penalty for
unsuspecting users

libsqlite3 now requires -lm

kyua-cli: convert auto_ptr to unique_ptr

Update kyua-cli to C++11 and use unique_ptr instead of auto_ptr,
(with std::move() where appropriate), to avoid deprecated warning by g++ 8.

(I didn't change some of the code that could arguably be refactored
to use unique_ptr or shared_ptr instead of raw pointers
and therefore remove the special case destructor handling).

kyua-cli: avoid warning about deprecated auto_ptr

Reorg docs, part 1:
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.

Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.

Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.

Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.

branches: 1.3.2; 1.3.4;
Fix paths to internal libraries.

This is the same fix applied to external/bsd/atf/Makefile.inc in revision
1.4 and should fix the build when using OBJMACHINE but not MAKEOBJDIR*.

Update reachover build files for kyua-cli-0.7.

branches: 1.1.4;
Add reachover build files for kyua-cli.

libsqlite3 now requires -lm

kyua-cli: convert auto_ptr to unique_ptr

Update kyua-cli to C++11 and use unique_ptr instead of auto_ptr,
(with std::move() where appropriate), to avoid deprecated warning by g++ 8.

(I didn't change some of the code that could arguably be refactored
to use unique_ptr or shared_ptr instead of raw pointers
and therefore remove the special case destructor handling).

kyua-cli: avoid warning about deprecated auto_ptr

Reorg docs, part 1:
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.

Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.

Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.

Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.

branches: 1.3.2; 1.3.4;
Fix paths to internal libraries.

This is the same fix applied to external/bsd/atf/Makefile.inc in revision
1.4 and should fix the build when using OBJMACHINE but not MAKEOBJDIR*.

Update reachover build files for kyua-cli-0.7.

branches: 1.1.4;
Add reachover build files for kyua-cli.

kyua-cli: convert auto_ptr to unique_ptr

Update kyua-cli to C++11 and use unique_ptr instead of auto_ptr,
(with std::move() where appropriate), to avoid deprecated warning by g++ 8.

(I didn't change some of the code that could arguably be refactored
to use unique_ptr or shared_ptr instead of raw pointers
and therefore remove the special case destructor handling).

kyua-cli: avoid warning about deprecated auto_ptr

Reorg docs, part 1:
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.

Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.

Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.

Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.

branches: 1.3.2; 1.3.4;
Fix paths to internal libraries.

This is the same fix applied to external/bsd/atf/Makefile.inc in revision
1.4 and should fix the build when using OBJMACHINE but not MAKEOBJDIR*.

Update reachover build files for kyua-cli-0.7.

branches: 1.1.4;
Add reachover build files for kyua-cli.

kyua-cli: avoid warning about deprecated auto_ptr

Reorg docs, part 1:
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.

Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.

Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.

Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.

branches: 1.3.2; 1.3.4;
Fix paths to internal libraries.

This is the same fix applied to external/bsd/atf/Makefile.inc in revision
1.4 and should fix the build when using OBJMACHINE but not MAKEOBJDIR*.

Update reachover build files for kyua-cli-0.7.

branches: 1.1.4;
Add reachover build files for kyua-cli.

Reorg docs, part 1:
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.

Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.

Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.

Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.

branches: 1.3.2; 1.3.4;
Fix paths to internal libraries.

This is the same fix applied to external/bsd/atf/Makefile.inc in revision
1.4 and should fix the build when using OBJMACHINE but not MAKEOBJDIR*.

Update reachover build files for kyua-cli-0.7.

branches: 1.1.4;
Add reachover build files for kyua-cli.

Rebase to HEAD as of a few days ago.

resync with head

file Makefile.inc was added on branch tls-maxphys on 2013-02-25 00:26:08 +0000

sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")

file Makefile.inc was added on branch yamt-pagecache on 2014-05-22 15:45:27 +0000

Rebase.