Update to dhcpcd-10.0.1 with the following changes:

* privsep: keep resources open rather than open/close
* dhcp6: OPTION_NTP_SERVER is now preferred over OPTION_SNTP_SERVER
* Misc bug fixes mainly around privsep for many platforms.
* Fix for reading the some BSD routing table entries.
* Fix reading authtokens from config.

Big new release, mainly around better privsep process management
which allows us to detect when they exit unexpectedly.

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

Update to dhcpcd-9.3.2 with the following changes:

* DHCP: Add support for IPv6-Only Preferred option, RFC 8925.
* BSD: `LINK_STATE_UNKNOWN` is treated as UP once again
* privsep: pass logging to the privileged actioneer
* privsep: allow logfile re-opening to work
* privsep: close BPF socket on ENXIO
* privsep: don't leave a BOOTP BPF listener rebooting in non master mode

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

branches: 1.1.1.5.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

Update to dhcpcd-9.3.2 with the following changes:

* DHCP: Add support for IPv6-Only Preferred option, RFC 8925.
* BSD: `LINK_STATE_UNKNOWN` is treated as UP once again
* privsep: pass logging to the privileged actioneer
* privsep: allow logfile re-opening to work
* privsep: close BPF socket on ENXIO
* privsep: don't leave a BOOTP BPF listener rebooting in non master mode

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

branches: 1.1.1.5.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Update to dhcpcd-9.3.2 with the following changes:

* DHCP: Add support for IPv6-Only Preferred option, RFC 8925.
* BSD: `LINK_STATE_UNKNOWN` is treated as UP once again
* privsep: pass logging to the privileged actioneer
* privsep: allow logfile re-opening to work
* privsep: close BPF socket on ENXIO
* privsep: don't leave a BOOTP BPF listener rebooting in non master mode

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

branches: 1.1.1.5.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

branches: 1.1.1.5.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

branches: 1.1.1.5.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.4; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.3.2; 1.1.1.3.6;
Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.1 with the following changes:
* hooks: remove use of local builtin for better portability
* dhcpcd: don't log errors working out carrier for departed interfaces
* ipv4: allow configuration of static broadcast address
* if: don't set MTU during interface discovery
* if: don't activate non matching interfaces to commandline ones
* eloop-bench: fix hangs when using a large number of cycles
* dhcp: don't bind when we've just probed an address to inform

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

branches: 1.1.1.1.4;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.