Import dhcpcd-10.0.2 with the following changes:
* BSD: When we get RTM_NEWADDR the interface must have IFF_UP
* BSD: Fix non INET6 builds
* DHCP: Don't enforce the message came port 67
* privsep: Allow zero length messages through
* dhcpcd: deal with HANGUP and EPIPE better
* dhcpcd: Fix waitip address family
* privsep: Check if we have a root process before sending it stuff
* privsep: Only unlink control sockets if we created them
* common: Improve valid_domain and check correct return
* common: Allow hwaddr_ntoa to print an empty string
* privsep: Send only what we have put in the buffer to script env

Update to dhcpcd-10.0.1 with the following changes:

* privsep: keep resources open rather than open/close
* dhcp6: OPTION_NTP_SERVER is now preferred over OPTION_SNTP_SERVER
* Misc bug fixes mainly around privsep for many platforms.
* Fix for reading the some BSD routing table entries.
* Fix reading authtokens from config.

Big new release, mainly around better privsep process management
which allows us to detect when they exit unexpectedly.

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.1.2 with the following changes:

* NetBSD: free ARP state once IPv4LL address announced
* NetBSD: Mark RA dervied addresses as AUTOCONF
* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified
* privsep: Implement a resource limited sandbox

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-10.0.1 with the following changes:

* privsep: keep resources open rather than open/close
* dhcp6: OPTION_NTP_SERVER is now preferred over OPTION_SNTP_SERVER
* Misc bug fixes mainly around privsep for many platforms.
* Fix for reading the some BSD routing table entries.
* Fix reading authtokens from config.

Big new release, mainly around better privsep process management
which allows us to detect when they exit unexpectedly.

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.1.2 with the following changes:

* NetBSD: free ARP state once IPv4LL address announced
* NetBSD: Mark RA dervied addresses as AUTOCONF
* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified
* privsep: Implement a resource limited sandbox

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.4.1 with the following changes:

* BSD: Find the correct interface for tunnelled routes
* OpenBSD: Fix uniqueness of routes for matching priorities
* Linux: Support more platforms for seccomp (thanks to Fabrice Fontaine)
* eloop: Process all waiting fd's as they come in
* control: Unlink sockets when not in privsep
* privsep: Renamed Master to Manager
* privsep: Renamed Privilged Actioneer to Privileged Proxy
* privsep: Fix getting interface VLANID on BSD
* privsep: Enforce proper alignment of serialized struct cmsghdr
* IPv4LL: Don't remove statically assigned addresses
* routes: Fix route comparision for network prefixes with different masks
* DHCP6: Only send FQDN for SOLICIT, REQUEST, RENEW, or REBIND messages
* DHCP6: Don't spam the log when a RA repeatedly triggers an INFORM
* DHCP: Fix infinite INFORM messages

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.1.2 with the following changes:

* NetBSD: free ARP state once IPv4LL address announced
* NetBSD: Mark RA dervied addresses as AUTOCONF
* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified
* privsep: Implement a resource limited sandbox

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.2.0 with the following changes:

* route: ensure IPv4LL routes come last in priority
* DHCP: fix many issues with extending the last lease
* privsep: don't read control group from config in privsep
* privsep: only the master process responds to signals
* privsep: use a socketpair for stderr/stdin rather than dupping /dev/null
* privsep: right limit stdin/stderr/stdout
* privsep: dumping a lease is now run in a sandbox
* options: check if kernel supports INET or INET6 before enabling default
* options: let clientid override a prior duid
* options: allow -1 to represent infinity for requested lease time
* dhcpcd: fix a crash initing a new interface after route overflow

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.1.2 with the following changes:

* NetBSD: free ARP state once IPv4LL address announced
* NetBSD: Mark RA dervied addresses as AUTOCONF
* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified
* privsep: Implement a resource limited sandbox

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.1.3 with the following changes:

* inet6: Add support for reporting Mobile IPv6 RA's
* inet6: Report RA Proxy flag if set
* BSD: Allow non NetBSD and OpenBSD to set IN6_IFF_AUTOCONF
* privsep: Don't handle any signals meant for the main process
* eloop: Try and survive a signal storm
* dhcpcd: Add an option to poll the interface carrier state
* script: Make visible some link level parameters to lease dumping
* inet6: Don't regen temp addresses we didn't add
* privsep: Don't limit file writes if logging to a file
* DHCP6: Fix lease timings with nodelay option

Update to dhcpcd-9.1.2 with the following changes:

* NetBSD: free ARP state once IPv4LL address announced
* NetBSD: Mark RA dervied addresses as AUTOCONF
* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified
* privsep: Implement a resource limited sandbox

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.1.2 with the following changes:

* NetBSD: free ARP state once IPv4LL address announced
* NetBSD: Mark RA dervied addresses as AUTOCONF
* BSD: Only mark static routes from dhcpcd.conf as static
* DHCP6: Ensure requested addresses are requested
* DHCP6: Fix prefix length calculation when no prefix specified
* privsep: Implement a resource limited sandbox

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.1.1 with the following changes:

* Restore dumping leases from stdin
* auth: Only accept RECONFIGURE messages from LL addresses
* auth: Access the RDM monotonic counter file via privsep
* ARP: call arp_announced() when cancelling it
* BSD: fwip(4) interfaces are now ignored by default
* privsep: Ensure IPC buffers are large enough to carry messages
* privsep: Only open RAW sockets for the needed protocols
* privsep: Fix indirect ioctls returning data
* privsep: wait for processes on SIGCHLD rather than when sent a STOP cmd
* eloop: just use ppoll/pollts(2), falling back to pselect(2)

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.1.0 with the following changes:

* Leases are stored outside the chroot again
* The chroot directory can now be (and should be) empty [1]
* ARP is now per address rather than per interface
* Filter allowed ioctls in the privileged actioneer
* Filter allowed UDP ports used by sendto(2) in the privileged actioneer
* Filter allowed file paths in the privileged actioneer
* route socket is now drained on overflow as it cannot be
re-opened by the unpriviledged user

* hostname can no longer be clobbered by SLAAC
* grep is no longer used by the test hook
* Interface hardware address type changes are now picked up
* Fixed some RA timing issues
* Fixed nd_* option parsing in dhcpcd.conf
* Allow SIGPIPE in scripts
* Default dhcpcd.conf no longer sends the current hostname
* Default dhcpcd.conf no longer sends a vendorclassid

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Update to dhcpcd-9.0.0 with the following changes:

* Decode interface complex interface names eth0.100:2 eth0i100:2.
This allows us to ignore some virtual interfaces by default
* ARP: Report L2 header address on conflict for more clarity
* DHCP: Support jumbo frames (untested)
* DHCP6: Clean up old lease on failure to confirm/rebind, etc
* RA: Prefer older routers
* INET6: Obscure prefixes are now calculated correctly

* Privilege Separation
* default hostname is now a blank string rather than localhost
* Leases are now dumped over the control socket - you get RA's now as well.
* Better support for many IPv6 routers
* RTM_MISS filtering
* RA: Deprecate stale addresses by setting pltime 0
* DHCP6: Deprecate stale addresses by setting pltime 0

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

branches: 1.1.1.7.2;
Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Import dhcpcd-8.1.2 with the following changes:
* hooks: STOPPED is now run on timeout and exit
* BSD: Use IP_REVCIF rather than IN_PKTINFO
* DHCP: When rebinding, ensure we have a DHCP ARP state
* RA: Sort routers when reachability changes
* RA: Apply hoplimit, reachable and retrans timer values to kernel
* RA: Warn if advertised MTU > interface MTU
* dhcpcd: Report SSID connection to when we gain carrier
* DHCP: Fix corruption of address flags when renewing

Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Import dhcpcd-8.0.0 with the following changes:

* ARP now supports many requests
* Routing tables now use Red-Black Trees
* Script variables are no longer allocated manually

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.4; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Import dhcpcd-7.1.0 with the following changes:

* NetBSD: sets SO_RERROR on to detect receive socket overflow
* BSD: route improvements to avoid listening for own changes
* IP6: implement IP6 address sharing
* BSD: catch UP/DOWN events when interfaces does support media changes
* IPv4LL: remember old address when carrier is lost

branches: 1.1.1.5.2; 1.1.1.5.6;
Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Import dhcpcd-7.0.0 with the following changes:
* dhcp: when unicasting on L3, unicast on L2 as well
* dhcp: when rebooting, don't set cidaddr
* dhcp6: don't listen on IPv6 addresses when not using DHCPv6
* dhcp: only set probe state when probing (fixes REBOOT reason)
* ipv6: disable kernel RA if interface is active
* hooks: set protocol to link for link layer events

Import dhcpcd-7.0.0-rc4 with the following changes:
* Don't flush prefix routes/routers if kernel does not support RA
* dhcp: improve errors around UDP checksum failure
* dhcp: announce existing addresses before rebooting
* bpf: rework loop so that we can close/reopen fd inside and abort
* ipv6nd: don't handle NA/RA for non active interfaces
* dhcp6: listen on all addresses in non master mode
* dhcpcd-run-hooks: set protocol in dhcpcd, don't guess
* Ensure that xid is unique across all interfaces
* dhcp6: redirect message to interface which uses the xid
* bsd: strip scope from LL addresses when detecting their addition
* ipv6nd: fix address lifetime overflow on carrier up
* dhcp6: fix confirmation of lease on carrier up

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

Import dhcpcd-7.0.0-rc2 with the following changes:

* dhcp: fixed classless static routes
* prefix delegation: build routes after assigning addresses
* dhcp: on lease expiration, discover only when carrier
* ip6: fix potential segfault when lifetime overflows
* dhcp: fix reporting of DNS encoded SIP servers
* dhcp6: fix unicast in non master mode

branches: 1.1.1.2.2; 1.1.1.2.4;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1

branches: 1.1.1.2.4;
Import dhcpcd-7.0.0-beta3 with the following changes:
* restored --logfile support as a few people complained it vanished
The new logging code even makes the overall binary size smaller
on most platforms.
* BPF filter now trims garbage trailing the payload
OK, it's not garbage, but userland doesn't know some drivers append
FCS to it.
* support NetBSD's RO_MSGFILTER socket option to reduce avoid context
switching for route(4) messages that don't interest us.
* Don't open sockets if just sending signals.
* HMAC-MD5 test's now check expectations in code rather than relying
on visual confirmation.
* added eloop-bench to test performance of eloop with available
polling mechanisms.

Import dhcpcd-7.0.0-beta. Changes from prior version include:

* source file locations reworked:
dhcpcd source is in src
dhcpcd hooks are in hooks
compat is in compat
* README split into README.md and BUILDING.md
* internal routing is now protocol agnostic
* avoid using __packed and use compile time asserts instead
* addresses some alignment issues
* disable some ARP code on kernels which support RFC5227
* BSD IPv6 kernel settings are now updated to reflect dhcpcd config
* custom logger has been removed, syslog handles everything
as such, the --logfile option has been removed as well.
If you need better/earlier logging, get a better syslogger!
* distinfo and signed distinfo files are now available alongside
release taraballs from this point onwards
* default DBDIR has changed from /var/db to /var/db/dhcpcd
* /etc/dhcpcd.duid moves to DBDIR/duid
* /etc/dhcpcd.secret moves to DBDIR/secret
* lease file names have dhcpcd removed from them as they are now
inside a directory of the same name
* fixed issues with reject routes not working on some platforms
* improved nl80211 support on Linux for working out the SSID
* no longer request NTP by default in dhcpcd.conf
* BPF filtering vastly improved so dhcpcd only wake up on
ARP or DHCP packets destined for it
* support for MUD URL (draft-ietf-opsawg-mud-05)
* if the kernel isn't doing DAD, don't insist on waiting for it
to actually do it
* fix a potential crash where the DHCP or ARP states could be
freed before the packet processing loop naturally breaks
* removed gateway and nogateway options
(these can be controlled by the nooption directive which
works for more than just gateways)
* removed ipv6ra_own and ipv6ra_own_default options
(these can be controled by the ipv6rs/noipv6rs directive)
* fix a crash receiving SIGUSR1