Disable dmf* and dmz* entries and add warns "not integrated yet."

Also note tty[EFGH]? have been used by MI wscons and new tty node names
should be assigned once dmf(4) is committed.

Ok'ed by ragge@ on port-vax@.
https://mail-index.netbsd.org/port-vax/2024/02/13/msg004859.html

Make sure to create wscons devices on the default "MAKEDEV all" target.

Necessary to make the X.org server work on the default installation.
Proposed on port-vax@, and ok'ed by mrg@:
https://mail-index.netbsd.org/port-vax/2024/01/thread1.html#004828

Worth to pull up to netbsd-10.

branches: 1.19.16;
USB for vax (similar to pmax; no/negligible impact on legacy):
* Add USB device files/majors.
* Make kernel configs with USB work.
* Provide a USB-enabled kernel config.

Add audio for vsaudio(4) and speaker to be on par with other archs.

branches: 1.17.26;
Seems like all the trendy ramdisks are using "makedev ipty" rather than
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue

Ensure the ramdisk has bpf for dhcpcd

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

branches: 1.13.2; 1.13.4;
PR/45452: Fix pasto (found by tsutsui@) which prevented ra* device
special files creation.

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Replace hexprint with a version that is much faster for values > 15.
Since I managed to commit my alternate scheme for zeropad, delete
the commented out lines and replace the only other use.
I've not deleted the function itself though.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.9.4;
Fix previous, caused by premature optimization...
Noted by Kirk Russell.

Use zeropad() and hexprint() instead of printf(1).

branches: 1.7.6;
Remove the compatibility stuff to link from various tapes to *mt*
aliases if the latter don't already exist, as it causes build problems
as reported on port-vax@ by Brian Chase.

Add warn() to display message to stderr prefixed by the script name,
and use appropriately.

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

don't change umask without setting it back to 77; it has unwanted side effects

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Make sure to create wscons devices on the default "MAKEDEV all" target.

Necessary to make the X.org server work on the default installation.
Proposed on port-vax@, and ok'ed by mrg@:
https://mail-index.netbsd.org/port-vax/2024/01/thread1.html#004828

Worth to pull up to netbsd-10.

USB for vax (similar to pmax; no/negligible impact on legacy):
* Add USB device files/majors.
* Make kernel configs with USB work.
* Provide a USB-enabled kernel config.

Add audio for vsaudio(4) and speaker to be on par with other archs.

branches: 1.17.26;
Seems like all the trendy ramdisks are using "makedev ipty" rather than
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue

Ensure the ramdisk has bpf for dhcpcd

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

branches: 1.13.2; 1.13.4;
PR/45452: Fix pasto (found by tsutsui@) which prevented ra* device
special files creation.

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Replace hexprint with a version that is much faster for values > 15.
Since I managed to commit my alternate scheme for zeropad, delete
the commented out lines and replace the only other use.
I've not deleted the function itself though.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.9.4;
Fix previous, caused by premature optimization...
Noted by Kirk Russell.

Use zeropad() and hexprint() instead of printf(1).

branches: 1.7.6;
Remove the compatibility stuff to link from various tapes to *mt*
aliases if the latter don't already exist, as it causes build problems
as reported on port-vax@ by Brian Chase.

Add warn() to display message to stderr prefixed by the script name,
and use appropriately.

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

don't change umask without setting it back to 77; it has unwanted side effects

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

USB for vax (similar to pmax; no/negligible impact on legacy):
* Add USB device files/majors.
* Make kernel configs with USB work.
* Provide a USB-enabled kernel config.

Add audio for vsaudio(4) and speaker to be on par with other archs.

branches: 1.17.26;
Seems like all the trendy ramdisks are using "makedev ipty" rather than
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue

Ensure the ramdisk has bpf for dhcpcd

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

branches: 1.13.2; 1.13.4;
PR/45452: Fix pasto (found by tsutsui@) which prevented ra* device
special files creation.

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Replace hexprint with a version that is much faster for values > 15.
Since I managed to commit my alternate scheme for zeropad, delete
the commented out lines and replace the only other use.
I've not deleted the function itself though.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.9.4;
Fix previous, caused by premature optimization...
Noted by Kirk Russell.

Use zeropad() and hexprint() instead of printf(1).

branches: 1.7.6;
Remove the compatibility stuff to link from various tapes to *mt*
aliases if the latter don't already exist, as it causes build problems
as reported on port-vax@ by Brian Chase.

Add warn() to display message to stderr prefixed by the script name,
and use appropriately.

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

don't change umask without setting it back to 77; it has unwanted side effects

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add audio for vsaudio(4) and speaker to be on par with other archs.

Seems like all the trendy ramdisks are using "makedev ipty" rather than
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue

Ensure the ramdisk has bpf for dhcpcd

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

branches: 1.13.2; 1.13.4;
PR/45452: Fix pasto (found by tsutsui@) which prevented ra* device
special files creation.

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Replace hexprint with a version that is much faster for values > 15.
Since I managed to commit my alternate scheme for zeropad, delete
the commented out lines and replace the only other use.
I've not deleted the function itself though.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.9.4;
Fix previous, caused by premature optimization...
Noted by Kirk Russell.

Use zeropad() and hexprint() instead of printf(1).

branches: 1.7.6;
Remove the compatibility stuff to link from various tapes to *mt*
aliases if the latter don't already exist, as it causes build problems
as reported on port-vax@ by Brian Chase.

Add warn() to display message to stderr prefixed by the script name,
and use appropriately.

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

don't change umask without setting it back to 77; it has unwanted side effects

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Seems like all the trendy ramdisks are using "makedev ipty" rather than
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue

Ensure the ramdisk has bpf for dhcpcd

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

branches: 1.13.2; 1.13.4;
PR/45452: Fix pasto (found by tsutsui@) which prevented ra* device
special files creation.

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Replace hexprint with a version that is much faster for values > 15.
Since I managed to commit my alternate scheme for zeropad, delete
the commented out lines and replace the only other use.
I've not deleted the function itself though.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.9.4;
Fix previous, caused by premature optimization...
Noted by Kirk Russell.

Use zeropad() and hexprint() instead of printf(1).

branches: 1.7.6;
Remove the compatibility stuff to link from various tapes to *mt*
aliases if the latter don't already exist, as it causes build problems
as reported on port-vax@ by Brian Chase.

Add warn() to display message to stderr prefixed by the script name,
and use appropriately.

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

don't change umask without setting it back to 77; it has unwanted side effects

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Pull up revision 1.9 (requested by lukem in ticket #258):
Fix previous, caused by premature optimization...
Noted by Kirk Russell.

Pull up revision 1.8 (requested by lukem in ticket #257):
Use zeropad() and hexprint() instead of printf(1).

Pull up following revision(s) (requested by hubertf in ticket #429):
etc/etc.bebox/MAKEDEV.conf: revision 1.5
etc/etc.x68k/MAKEDEV.conf: revision 1.8
etc/etc.next68k/MAKEDEV.conf: revision 1.3
etc/etc.ofppc/MAKEDEV.conf: revision 1.5
etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
etc/etc.amd64/MAKEDEV.conf: revision 1.8
etc/etc.algor/MAKEDEV.conf: revision 1.4
etc/etc.sparc64/MAKEDEV.conf: revision 1.12
etc/etc.hp300/MAKEDEV.conf: revision 1.11
etc/etc.sgimips/MAKEDEV.conf: revision 1.8
etc/etc.pc532/MAKEDEV.conf: revision 1.5
etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
etc/etc.pmppc/MAKEDEV.conf: revision 1.6
etc/etc.cobalt/MAKEDEV.conf: revision 1.4
etc/etc.evbmips/MAKEDEV.conf: revision 1.4
etc/etc.sparc/MAKEDEV.conf: revision 1.11
etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
etc/etc.i386/MAKEDEV.conf: revision 1.12
etc/etc.acorn32/MAKEDEV.conf: revision 1.8
etc/etc.evbppc/MAKEDEV.conf: revision 1.5
etc/etc.amiga/MAKEDEV.conf: revision 1.10
etc/etc.prep/MAKEDEV.conf: revision 1.4
etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
etc/MAKEDEV.tmpl: revision 1.71
etc/etc.alpha/MAKEDEV.conf: revision 1.7
etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
etc/etc.macppc/MAKEDEV.conf: revision 1.7
etc/etc.mmeye/MAKEDEV.conf: revision 1.5
etc/etc.mac68k/MAKEDEV.conf: revision 1.7
etc/etc.vax/MAKEDEV.conf: revision 1.10
etc/etc.arc/MAKEDEV.conf: revision 1.6
etc/etc.hp700/MAKEDEV.conf: revision 1.4
etc/etc.mipsco/MAKEDEV.conf: revision 1.3
etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@

Pull up following revision(s) (requested by martin in ticket #512):
distrib/sparc/miniroot/Makefile.inc: revision 1.19
etc/etc.vax/MAKEDEV.conf: revision 1.17
Seems like all the trendy ramdisks are using "makedev ipty" rather than
"makedev pty0" now. Update vax to match so install media doesn't fail
with
.../MAKEDEV: pty0: creating BSD style tty nodes with ptyfs is a security issue
add ipty to the list of MAKEDEVTARGETS. should fix PR#46812.
certainly makes the qemu/sparc install work for me with netbsd-6.
XXX: pullup.

Pull up following revision(s) (requested by abs in ticket #405):
etc/etc.vax/MAKEDEV.conf: revision 1.15
etc/etc.vax/MAKEDEV.conf: revision 1.16
sys/arch/vax/conf/INSTALL: revision 1.61
sys/arch/vax/conf/INSTALL: revision 1.62
distrib/vax/install.md: file removal
distrib/vax/ramdisk/list: revision 1.30
distrib/vax/miniroot/list: revision 1.15
distrib/vax/miniroot/Makefile.inc: revision 1.22
distrib/vax/ramdisk/Makefile: revision 1.30
distrib/vax/ramdisk/dot.profile: revision 1.9
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)
Sync devices with GENERIC, and include bpfilter to allow dhcpcd to work
Ensure the ramdisk has bpf for dhcpcd

Pull up revisions:
src/etc/etc.vax/MAKEDEV.conf revision 1.14
src/sys/arch/vax/conf/GENERIC revision 1.182
src/sys/arch/vax/conf/INSTALL revision 1.60
src/sys/arch/vax/conf/VAX780 revision 1.9
src/sys/arch/vax/conf/majors.vax revision 1.24
src/sys/arch/vax/vax/disksubr.c revision 1.53
src/sys/dev/DEVNAMES revision 1.275
src/sys/dev/mscp/files.mscp revision 1.8
src/sys/dev/mscp/mscp_disk.c revision 1.72
src/sys/dev/mscp/mscp_subr.c revision 1.42
src/distrib/vax/ramdisk/Makefile revision 1.29
(requested by abs in ticket #385).

- Add racd* devices for MSCP based CD-ROM drives (RRD40s), as opposed
to mixing them in with the ra* disks, modelled loosely on how MSCP
rx* floppies are handled
- racd* defaults to the same single iso9660 partition as cd*
- Cleanup config option handling slightly so any combination of ra*,
rx* (and now raccd*) can be defined without build errors.
- Avoid ugly printf when disks have all zero disklabel magic number

Include racd0 and racd1 on ramdisk

sync with head