remove nsmb from MD list of devices to create for 'all'

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.17.10; 1.17.12;
Add ld(4) nodes

branches: 1.16.2;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.16;
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.14.2;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Remove duplicated cfs0.

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.12; 1.11.16;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.10.4;
added ttyC00 and ttyC01 fopr the SPARCbook's internal modem and PCMCIA
modems

Make fb a link to fb0.
Add an entry for fb1.

added wd*

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

remove target before executing mknod (in std_sparc).

fix floppy & ramdisk targets

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.17.10;
Add ld(4) nodes

branches: 1.16.2;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.16;
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.14.2;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Remove duplicated cfs0.

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.12; 1.11.16;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.10.4;
added ttyC00 and ttyC01 fopr the SPARCbook's internal modem and PCMCIA
modems

Make fb a link to fb0.
Add an entry for fb1.

added wd*

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

remove target before executing mknod (in std_sparc).

fix floppy & ramdisk targets

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add ld(4) nodes

branches: 1.16.2;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.16;
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.14.2;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Remove duplicated cfs0.

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.12; 1.11.16;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.10.4;
added ttyC00 and ttyC01 fopr the SPARCbook's internal modem and PCMCIA
modems

Make fb a link to fb0.
Add an entry for fb1.

added wd*

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

remove target before executing mknod (in std_sparc).

fix floppy & ramdisk targets

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.14.2;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Remove duplicated cfs0.

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.12; 1.11.16;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.10.4;
added ttyC00 and ttyC01 fopr the SPARCbook's internal modem and PCMCIA
modems

Make fb a link to fb0.
Add an entry for fb1.

added wd*

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

remove target before executing mknod (in std_sparc).

fix floppy & ramdisk targets

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.14.2;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Remove duplicated cfs0.

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.12; 1.11.16;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.10.4;
added ttyC00 and ttyC01 fopr the SPARCbook's internal modem and PCMCIA
modems

Make fb a link to fb0.
Add an entry for fb1.

added wd*

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

remove target before executing mknod (in std_sparc).

fix floppy & ramdisk targets

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Pull up following revision(s) (requested by hubertf in ticket #429):
etc/etc.bebox/MAKEDEV.conf: revision 1.5
etc/etc.x68k/MAKEDEV.conf: revision 1.8
etc/etc.next68k/MAKEDEV.conf: revision 1.3
etc/etc.ofppc/MAKEDEV.conf: revision 1.5
etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
etc/etc.amd64/MAKEDEV.conf: revision 1.8
etc/etc.algor/MAKEDEV.conf: revision 1.4
etc/etc.sparc64/MAKEDEV.conf: revision 1.12
etc/etc.hp300/MAKEDEV.conf: revision 1.11
etc/etc.sgimips/MAKEDEV.conf: revision 1.8
etc/etc.pc532/MAKEDEV.conf: revision 1.5
etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
etc/etc.pmppc/MAKEDEV.conf: revision 1.6
etc/etc.cobalt/MAKEDEV.conf: revision 1.4
etc/etc.evbmips/MAKEDEV.conf: revision 1.4
etc/etc.sparc/MAKEDEV.conf: revision 1.11
etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
etc/etc.i386/MAKEDEV.conf: revision 1.12
etc/etc.acorn32/MAKEDEV.conf: revision 1.8
etc/etc.evbppc/MAKEDEV.conf: revision 1.5
etc/etc.amiga/MAKEDEV.conf: revision 1.10
etc/etc.prep/MAKEDEV.conf: revision 1.4
etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
etc/MAKEDEV.tmpl: revision 1.71
etc/etc.alpha/MAKEDEV.conf: revision 1.7
etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
etc/etc.macppc/MAKEDEV.conf: revision 1.7
etc/etc.mmeye/MAKEDEV.conf: revision 1.5
etc/etc.mac68k/MAKEDEV.conf: revision 1.7
etc/etc.vax/MAKEDEV.conf: revision 1.10
etc/etc.arc/MAKEDEV.conf: revision 1.6
etc/etc.hp700/MAKEDEV.conf: revision 1.4
etc/etc.mipsco/MAKEDEV.conf: revision 1.3
etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@

Merge in changes between wrstuden-revivesa-base-2 and
wrstuden-revivesa-base-3.

Sync with HEAD.

sync with head