Add PCI devices for vlpci(4).

branches: 1.14.2;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.13.16;
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.12.18;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.10; 1.11.14;
Restore targets for sd(4) devices, which can be attached at atapibus(4).
Closes PR port-shark/36693.

branches: 1.10.2;
sysinst needs wskbd0 to set the keyboard encoding, so generate all wscons
devices instead of just ttyE0.

Switch NetBSD/shark's installation kernel and disk image to use wscons
instead of pccons, just like its GENERIC kernel does.

This obsoletes pccons in this platform, which will probably be removed
later.

In the shark's installation image, create the bpf device from the
'ramdisk' MAKEDEV goal instead of from a Makefile definition. As there
is just one configuration for the ramdisk, it's better to keep everything
in one place.

branches: 1.7.10; 1.7.12;
Create wscons devices.

fix floppy & ramdisk targets

g/c SCSI-related entries

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.12.18;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.10; 1.11.14;
Restore targets for sd(4) devices, which can be attached at atapibus(4).
Closes PR port-shark/36693.

branches: 1.10.2;
sysinst needs wskbd0 to set the keyboard encoding, so generate all wscons
devices instead of just ttyE0.

Switch NetBSD/shark's installation kernel and disk image to use wscons
instead of pccons, just like its GENERIC kernel does.

This obsoletes pccons in this platform, which will probably be removed
later.

In the shark's installation image, create the bpf device from the
'ramdisk' MAKEDEV goal instead of from a Makefile definition. As there
is just one configuration for the ramdisk, it's better to keep everything
in one place.

branches: 1.7.10; 1.7.12;
Create wscons devices.

fix floppy & ramdisk targets

g/c SCSI-related entries

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.12.18;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.11.10; 1.11.14;
Restore targets for sd(4) devices, which can be attached at atapibus(4).
Closes PR port-shark/36693.

branches: 1.10.2;
sysinst needs wskbd0 to set the keyboard encoding, so generate all wscons
devices instead of just ttyE0.

Switch NetBSD/shark's installation kernel and disk image to use wscons
instead of pccons, just like its GENERIC kernel does.

This obsoletes pccons in this platform, which will probably be removed
later.

In the shark's installation image, create the bpf device from the
'ramdisk' MAKEDEV goal instead of from a Makefile definition. As there
is just one configuration for the ramdisk, it's better to keep everything
in one place.

branches: 1.7.10; 1.7.12;
Create wscons devices.

fix floppy & ramdisk targets

g/c SCSI-related entries

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Sync w/ NetBSD-4-RC_1

Pull up following revision(s) (requested by tsutsui in ticket #838):
etc/etc.shark/MAKEDEV.conf: revision 1.11
sys/arch/shark/conf/majors.shark: revision 1.23
Restore a device major for sd(4), which can be attached at atapibus(4).
Fixes part of PR port-shark/36693.
Restore targets for sd(4) devices, which can be attached at atapibus(4).
Closes PR port-shark/36693.

sysinst needs wskbd0 to set the keyboard encoding, so generate all wscons
devices instead of just ttyE0.

file MAKEDEV.conf was added on branch matt-mips64 on 2007-08-01 14:19:33 +0000

Merge in changes between wrstuden-revivesa-base-2 and
wrstuden-revivesa-base-3.

Sync with HEAD.

sync with head