Switch default console tty from /dev/console to /dev/constty

With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.

The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off

Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)

As discussed on current-users

turn on "console" which can be either the serial console or the glass tty
instead of ttyE0, to facilitate anita tests. From uanand.

Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.

branches: 1.9.18; 1.9.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.8.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

run getty on /dev/ttyE0 by default.
otherwise, user can't start X server.

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.2.4;
change console terminal type from 'unknown' to 'vt100'.

branches: 1.1.1;
Initial revision

turn on "console" which can be either the serial console or the glass tty
instead of ttyE0, to facilitate anita tests. From uanand.

Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.

branches: 1.9.18; 1.9.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.8.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

run getty on /dev/ttyE0 by default.
otherwise, user can't start X server.

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.2.4;
change console terminal type from 'unknown' to 'vt100'.

branches: 1.1.1;
Initial revision

Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.

branches: 1.9.18; 1.9.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.8.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

run getty on /dev/ttyE0 by default.
otherwise, user can't start X server.

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.2.4;
change console terminal type from 'unknown' to 'vt100'.

branches: 1.1.1;
Initial revision

Import NetBSD/hpcmips source files from hpcmips repository.
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c

This should be the last piece of the move to 64 default PTYs. /etc/ttys now
has entries for 64 ptys.

Thanks to Matthew Green for pointing out the need for this.

Sync with HEAD.

Pull up following revision(s) (requested by martin in ticket #342):
etc/etc.shark/ttys: revision 1.8
etc/etc.hpcsh/ttys: revision 1.11
etc/etc.amiga/ttys: revision 1.24
etc/etc.arc/ttys: revision 1.8
etc/etc.alpha/ttys: revision 1.12
etc/etc.amigappc/ttys: revision 1.3
etc/etc.ofppc/ttys: revision 1.9
etc/etc.hp300/ttys: revision 1.16
etc/etc.rs6000/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.20
etc/etc.acorn26/ttys: revision 1.4
etc/etc.iyonix/ttys: revision 1.4
etc/etc.netwinder/ttys: revision 1.8
etc/etc.mac68k/ttys: revision 1.20
etc/etc.evbarm/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.15
etc/etc.hpcmips/ttys: revision 1.10
share/terminfo/terminfo: revision 1.5
etc/etc.mvmeppc/ttys: revision 1.6
etc/etc.next68k/ttys: revision 1.10
etc/etc.acorn32/ttys: revision 1.9
etc/etc.ibmnws/ttys: revision 1.4
etc/etc.atari/ttys: revision 1.10
etc/etc.sgimips/ttys: revision 1.10
etc/etc.newsmips/ttys: revision 1.9
etc/etc.hpcarm/ttys: revision 1.6
etc/etc.cats/ttys: revision 1.7
etc/etc.amd64/ttys: revision 1.6
etc/etc.prep/ttys: revision 1.8
etc/etc.zaurus/ttys: revision 1.3
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
Add a delete key capability to our wsvt25 entry. Fixes a problem noted by
David Lord on netbsd-users.

sync with head